04023J0R2ABWTR Equivalent & Substitute Parts

Part Overview

The 04023J0R2ABWTR is a 0.2 pF thin film capacitor manufactured by KYOCERA AVX in the Accu-P® series. This surface mount component operates across -55°C to 125°C with a rated voltage of 25 V and is housed in a 0402 (1005 Metric) package. The part is currently active in production. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained, particularly when seeking alternatives due to inventory availability, packaging format differences, or compliance requirements.

Substiute Parts

04023J0R2ABWTR

KYOCERA AVXIn Stock: 94804023J0R2ABWTR Datasheet

Current PartRFQ

04023J0R2ABSTR

KYOCERA AVXIn Stock: 1525004023J0R2ABSTR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 04023J0R2ABWTR is determined by strict equivalence across the following critical parameters:

• Capacitance value: 0.2 pF
• Capacitance tolerance: ±0.05 pF
• Rated voltage: 25 V
• Package type: 0402 (1005 Metric)
• Mounting configuration: Surface Mount
• Operating temperature range: -55°C to 125°C
• Moisture sensitivity level: 1 (Unlimited)

The identified substitute, 04023J0R2ABSTR, maintains identical electrical and mechanical specifications across all critical parameters. The primary distinction between the main part and its substitute lies in packaging format (Tape & Reel designation) and regulatory compliance status.

Parameter Comparison

Engineering Selection Recommendations

Both the 04023J0R2ABWTR and 04023J0R2ABSTR are functionally equivalent thin film capacitors with identical electrical performance and mechanical compatibility. Selection between these parts should be based on regulatory and compliance requirements applicable to the end application.

The 04023J0R2ABSTR offers ROHS3 compliance and REACH unaffected status, making it suitable for applications subject to European Union environmental directives. The 04023J0R2ABWTR, while RoHS non-compliant and REACH affected, remains a valid selection for applications without such regulatory constraints.

Both parts maintain active production status and are available in adequate inventory quantities. The choice between them does not impact circuit performance, thermal behavior, or frequency response characteristics.

Frequently Asked Questions (FAQ)

Q: Can 04023J0R2ABSTR replace 04023J0R2ABWTR in all applications?

A: Yes, from an electrical and mechanical standpoint. However, regulatory compliance requirements must be evaluated. If your application requires ROHS3 compliance or REACH compliance, 04023J0R2ABSTR is the appropriate selection.

Q: Are there any performance differences between these two parts?

A: No. Both parts are manufactured by KYOCERA AVX in the Accu-P® series with identical capacitance, tolerance, voltage rating, temperature range, and RF characteristics.

Q: What is the significance of the packaging designation difference?

A: Both parts are supplied in Tape & Reel (TR) format. The designation difference reflects internal KYOCERA AVX part numbering conventions and does not affect physical packaging or handling requirements.

Q: Which part should I specify for new designs?

A: Selection depends on your regulatory environment. For applications requiring ROHS3 or REACH compliance, specify 04023J0R2ABSTR. For applications without these requirements, either part is acceptable based on availability and cost considerations.

Q: Are both parts available in the same quantities?

A: Inventory levels differ. 04023J0R2ABSTR has higher stock availability (15,200 pcs) compared to 04023J0R2ABWTR (920 pcs). This may influence procurement decisions for high-volume applications.