Molex 0395345713 Terminal Block Plug – Equivalent & Substitute Parts

Part Overview

The Molex 0395345713 is a 13-position terminal block plug with female sockets, 0.200" (5.08mm) pitch, designed for 180° free-hanging in-line applications. This component is part of the Eurostyle ESE 39534 series and is currently active in production. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling direct replacement in compatible circuit designs without functional degradation.

Key Parameters

Parameter	Value
Number of Positions	13
Pitch	0.200" (5.08mm)
Type	Plug, Female Sockets
Plug Wire Entry	180°
Mounting Type	Free Hanging (In-Line)
Termination Style	Screw - Rising Cage Clamp
Voltage - UL	300 V
Wire Gauge Range	12-30 AWG
Operating Temperature	-40°C ~ 115°C
Housing Material	Polyamide (PA66), Nylon 6/6
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0395345713 is determined by strict alignment of the following critical parameters:

Position Count & Pitch: Substitute must have 13 positions at 0.200" (5.08mm) pitch for mechanical and electrical compatibility
Connector Type & Gender: Plug configuration with female sockets required for mating with corresponding receptacles
Wire Entry Orientation: 180° free-hanging in-line entry must be maintained
Termination Method: Screw-based rising cage clamp termination ensures consistent wire retention and electrical contact
Voltage & Current Rating: UL voltage rating of 300 V is standard; current ratings may vary within acceptable operational limits
Wire Gauge Compatibility: 12-30 AWG range accommodates standard industrial wiring
Temperature Range: Operating temperature must support the -40°C to 115°C envelope
Regulatory Compliance: RoHS3 compliance and UL94 V-0 flammability rating are mandatory for equivalent substitution

The TE Connectivity AMP Connectors part 1-796634-3 meets these criteria and is classified as a manufacturer-recommended substitute.

Parameter Comparison

Parameter	Molex 0395345713	TE Connectivity 1-796634-3
Manufacturer	Molex	TE Connectivity AMP Connectors
Number of Positions	13	13
Pitch	0.200" (5.08mm)	0.200" (5.08mm)
Type	Plug, Female Sockets	Plug, Female Sockets
Plug Wire Entry	180°	180°
Mounting Type	Free Hanging (In-Line)	Free Hanging (In-Line)
Termination Style	Screw - Rising Cage Clamp	Screw - Rising Cage Clamp
Voltage - UL	300 V	300 V
Current - UL	18 A	15 A
Wire Gauge Range - AWG	12-30 AWG	12-30 AWG
Operating Temperature	-40°C ~ 115°C	-40°C ~ 110°C
Housing Material	Polyamide (PA66), Nylon 6/6	Polyamide (PA66), Nylon 6/6
Material Flammability Rating	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
Contact Mating Finish	Gold	Tin
Torque - Screw	0.56 Nm (5.0 Lb-In)	0.79 Nm (7.0 Lb-In)
Wire Strip Length	6.5mm	6-7.5mm
Insulation Height	0.591" (15.00mm)	0.610" (15.49mm)

Engineering Selection Recommendations

Both the Molex 0395345713 and TE Connectivity 1-796634-3 are active production components with ROHS3 compliance and UL94 V-0 flammability certification. The primary differences are:

Current Rating: The Molex part supports 18 A, while the TE Connectivity substitute is rated for 15 A. Selection depends on circuit current requirements.
Contact Finish: Molex uses gold plating; TE Connectivity uses tin. Gold provides superior corrosion resistance in high-humidity or corrosive environments.
Operating Temperature Upper Limit: Molex supports 115°C; TE Connectivity supports 110°C. Applications requiring sustained operation above 110°C require the Molex part.
Screw Torque Specification: TE Connectivity requires higher torque (0.79 Nm vs. 0.56 Nm). Verify torque tool calibration during installation.

Selection between these parts is determined by circuit current demand, environmental exposure, and temperature operating envelope.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 1-796634-3 be used as a direct replacement for the Molex 0395345713?

A: Direct replacement is possible when circuit current does not exceed 15 A and operating temperature remains below 110°C. The 13-position, 5.08mm pitch configuration, female socket type, and 180° free-hanging orientation are identical. Verify current and temperature requirements before substitution.

Q: What is the significance of the contact mating finish difference (gold vs. tin)?

A: Gold plating provides enhanced corrosion resistance and is preferred in high-humidity, salt-spray, or chemically aggressive environments. Tin plating is suitable for standard industrial applications with controlled environmental conditions. Contact finish does not affect electrical compatibility in normal operating conditions.

Q: Are there mechanical compatibility concerns between these parts?

A: Both parts use identical pitch (5.08mm), position count (13), and mounting type (free-hanging in-line). Insulation height differs slightly (0.591" vs. 0.610"), which is within typical manufacturing tolerance and does not affect mating with standard receptacles. Screw torque specifications differ; follow the manufacturer's torque value for the selected part.

Q: What packaging options are available?

A: Both parts are supplied in bulk packaging. Inventory availability: Molex 0395345713 (1045 pcs), TE Connectivity 1-796634-3 (634 pcs).

Q: Are both parts compliant with current regulatory standards?

A: Yes. Both parts are ROHS3 compliant, UL94 V-0 rated, and carry EAR99 ECCN classification. Both are classified as active production components.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message