Molex 0395345513 Terminal Block Plug – Equivalent & Substitute Parts

Part Overview

The Molex 0395345513 is a 13-position terminal block plug with female sockets, 0.200" (5.08mm) pitch, designed for 180° free-hanging in-line applications. This component is part of the Eurostyle ESE 39534 series and is actively manufactured. The part operates at 18 A (UL) and 300 V, supporting wire gauges from 12–30 AWG with screw-rising cage clamp termination. Equivalent parts are identified when they maintain the same electrical ratings, mechanical pitch, position count, termination method, and physical form factor to ensure direct functional replacement in existing designs.

Key Parameters

Parameter	Value
Manufacturer Part Number	0395345513
Manufacturer	Molex
Category	Terminal Blocks
Type	Plug, Female Sockets
Number of Positions	13
Pitch	0.200" (5.08mm)
Plug Wire Entry	180°
Termination Style	Screw - Rising Cage Clamp
Mounting Type	Free Hanging (In-Line)
Current Rating (UL)	18 A
Voltage Rating (UL)	300 V
Wire Gauge Range	12–30 AWG
Operating Temperature	-40°C to 115°C
Product Status	Active
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0395345513 is determined by strict alignment of the following parameters:

Position count and pitch: Must be 13 positions at 0.200" (5.08mm) spacing
Connector type: Must be a plug with female sockets
Wire entry orientation: Must support 180° free-hanging in-line configuration
Termination method: Must use screw-rising cage clamp technology
Electrical ratings: Current and voltage ratings must meet or exceed UL specifications (18 A, 300 V minimum)
Wire gauge compatibility: Must accept 12–30 AWG conductors
Housing material and flammability: Must be polyamide (PA66/Nylon 6/6) with UL94 V-0 rating
Compliance: Must maintain ROHS3 compliance and equivalent environmental certifications

The TE Connectivity AMP Connectors part 1-796634-3 meets these criteria and is classified as a manufacturer-recommended equivalent.

Parameter Comparison

Parameter	Molex 0395345513	TE Connectivity 1-796634-3	Compatibility Notes
Number of Positions	13	13	Identical
Pitch	0.200" (5.08mm)	0.200" (5.08mm)	Identical
Type	Plug, Female Sockets	Plug, Female Sockets	Identical
Plug Wire Entry	180°	180°	Identical
Termination Style	Screw - Rising Cage Clamp	Screw - Rising Cage Clamp	Identical
Mounting Type	Free Hanging (In-Line)	Free Hanging (In-Line)	Identical
Current Rating (UL)	18 A	15 A	TE part rated 3 A lower; acceptable for applications ≤15 A
Voltage Rating (UL)	300 V	300 V	Identical
Wire Gauge Range	12–30 AWG	12–30 AWG	Identical
Operating Temperature	-40°C to 115°C	-40°C to 110°C	TE part rated 5°C lower at upper limit
Contact Mating Finish	Gold	Tin	Different finishes; both acceptable for standard applications
Housing Material	Polyamide (PA66), Nylon 6/6	Polyamide (PA66), Nylon 6/6	Identical
Material Flammability Rating	UL94 V-0	UL94 V-0	Identical
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	Identical
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	Identical

Engineering Selection Recommendations

The TE Connectivity AMP Connectors 1-796634-3 is an active, ROHS3-compliant equivalent suitable for direct substitution in applications where the following conditions are met:

Circuit current demand does not exceed 15 A (the TE part's UL rating)
Operating temperature does not exceed 110°C (the TE part's upper limit)
Contact finish compatibility with existing mating connectors is acceptable (TE part uses tin plating versus Molex gold plating)

Both parts share identical mechanical form factors, pitch, position count, termination technology, and housing material specifications. Both maintain UL94 V-0 flammability certification and ROHS3 compliance. Selection between these parts should be based on application current and temperature requirements, as well as contact finish requirements for the specific mating interface.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 1-796634-3 replace the Molex 0395345513 in all applications?

A: Direct substitution is valid only when circuit current does not exceed 15 A and operating temperature remains below 110°C. The Molex part is rated to 18 A and 115°C, providing higher margins. Verify your application's actual operating conditions before substitution.

Q: What is the significance of the different contact finishes (gold vs. tin)?

A: Contact finish affects corrosion resistance and mating interface compatibility. Gold plating (Molex) provides superior corrosion resistance; tin plating (TE) is acceptable for standard industrial environments. Ensure the mating connector accepts tin-plated contacts, or contact finish incompatibility may result in poor electrical connection.

Q: Are the screw torque specifications different between these parts?

A: Yes. Molex 0395345513 specifies 0.56 Nm (5.0 Lb-In); TE Connectivity 1-796634-3 specifies 0.79 Nm (7.0 Lb-In). Use the torque value corresponding to the installed part to avoid under-tightening or over-tightening, which can compromise electrical contact or damage the housing.

Q: Do both parts support the same wire gauge range?

A: Yes. Both parts accept 12–30 AWG conductors. Wire strip length differs slightly (Molex: 6.5mm; TE: 6–7.5mm), but this does not affect compatibility with standard wire preparation practices.

Q: Are there any compliance or certification differences?

A: Both parts are ROHS3 compliant, UL94 V-0 rated, and carry MSL 1 (Unlimited) moisture sensitivity ratings. No compliance barriers exist for substitution in regulated applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message