Equivalent & Substitute Parts for Molex 0395340613

Part Overview

The Molex 0395340613 is a 13-position terminal block plug with female sockets, 0.200" (5.08mm) pitch, designed for 180° free-hanging in-line applications. This component is part of the Eurostyle ESE 39534 series and is currently in active production status. Alternative equivalent parts may be required due to supply chain considerations, design standardization across manufacturing facilities, or specific application requirements for different electrical or mechanical characteristics.

Substiute Parts

0395340613

MolexIn Stock: 8060395340613 Datasheet

Current PartRFQ

1-796634-3

TE Connectivity AMP ConnectorsIn Stock: 6841-796634-3 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The TE Connectivity AMP Connectors part number 1-796634-3 qualifies as an equivalent substitute based on the following critical parameters:

Matching Parameters:

• 13-position terminal block plug configuration
• 0.200" (5.08mm) pitch spacing
• Female socket type
• 180° free-hanging in-line wire entry orientation
• Screw-based rising cage clamp termination style
• 12-30 AWG wire gauge compatibility
• 300 V UL voltage rating
• Polyamide (PA66) nylon 6/6 housing material
• UL94 V-0 flammability rating
• ROHS3 compliance
• Active product status

Allowable Parameter Variations:

• Current rating: 18 A (Molex) vs. 15 A (TE Connectivity) — the substitute operates within acceptable current limits for most applications
• Operating temperature range: -40°C ~ 115°C (Molex) vs. -40°C ~ 110°C (TE Connectivity) — both meet standard industrial temperature requirements
• Contact mating finish: Gold (Molex) vs. Tin (TE Connectivity) — both provide adequate contact reliability
• Housing color: Black (Molex) vs. Green (TE Connectivity) — cosmetic difference with no functional impact
• Screw torque specification: 0.56 Nm vs. 0.79 Nm — both within acceptable mechanical assembly ranges

Parameter Comparison

Engineering Selection Recommendations

Both the Molex 0395340613 and TE Connectivity 1-796634-3 maintain active product status and full ROHS3 compliance, ensuring long-term availability and regulatory alignment. The mechanical and electrical compatibility is established through identical pitch spacing, position count, wire entry orientation, and termination methodology.

The TE Connectivity substitute operates at a 15 A UL current rating compared to the Molex 18 A rating. This difference is acceptable for applications where the circuit design current does not exceed 15 A. The operating temperature range of -40°C to 110°C on the TE Connectivity part covers standard industrial and commercial temperature requirements, with the Molex part providing an additional 5°C upper margin.

Contact finish differences (gold versus tin) do not affect functional compatibility in standard applications. Both materials provide adequate contact resistance and reliability for the specified voltage and current parameters. Housing color variation is purely cosmetic and does not impact electrical or mechanical performance.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 1-796634-3 be used as a direct replacement for the Molex 0395340613?

A: Yes, the TE Connectivity part is mechanically and electrically compatible as a substitute. Both components share identical pitch spacing (5.08mm), position count (13), wire entry orientation (180°), and termination style (screw-based rising cage clamp). Verify that your application circuit current does not exceed 15 A, which is the TE Connectivity part's UL rating.

Q: What is the significance of the current rating difference (18 A vs. 15 A)?

A: The current rating indicates the maximum continuous current the component can safely carry under specified conditions. If your application requires currents above 15 A, the Molex 0395340613 with its 18 A rating is the appropriate choice. For applications at or below 15 A, both parts are equivalent.

Q: Are there differences in wire gauge compatibility?

A: No. Both parts accept wire gauges from 12 to 30 AWG, providing identical wire termination flexibility.

Q: Does the contact finish (gold vs. tin) affect performance?

A: Contact finish does not affect functional compatibility in standard applications. Both gold and tin finishes provide adequate contact reliability at the specified voltage (300 V) and current levels. Material selection may be driven by specific environmental or corrosion resistance requirements in specialized applications.

Q: What is the operating temperature range for each part?

A: The Molex 0395340613 operates from -40°C to 115°C. The TE Connectivity 1-796634-3 operates from -40°C to 110°C. Both ranges cover standard industrial and commercial temperature environments. If your application requires operation above 110°C, the Molex part is required.

Q: Are both parts RoHS compliant?

A: Yes. Both the Molex 0395340613 and TE Connectivity 1-796634-3 are ROHS3 compliant, meeting current environmental and regulatory requirements.

Q: What is the difference in screw torque specifications?

A: The Molex part specifies 0.56 Nm (5.0 Lb-In) torque, while the TE Connectivity part specifies 0.79 Nm (7.0 Lb-In). Both values fall within acceptable mechanical assembly ranges. Follow the manufacturer's torque specification for the part being installed to ensure proper terminal block connection integrity.