Molex 0395340513 Terminal Block Plug – Equivalent & Substitute Parts

Part Overview

The Molex 0395340513 is a 13-position terminal block plug with female sockets, 0.200" (5.08mm) pitch, designed for 180° free-hanging in-line applications. This component is part of the Eurostyle ESE 39534 series and is currently active in production. Finding equivalent or substitute parts may be necessary due to inventory constraints, lead time requirements, or application-specific compatibility needs with alternative connector ecosystems.

Key Parameters

Parameter	Value
Manufacturer Part Number	0395340513
Manufacturer	Molex
Category	Terminal Blocks
Number of Positions	13
Pitch	0.200" (5.08mm)
Type	Plug, Female Sockets
Plug Wire Entry	180°
Termination Style	Screw - Rising Cage Clamp
Mounting Type	Free Hanging (In-Line)
Current - UL	18 A
Voltage - UL	300 V
Wire Gauge - AWG	12-30 AWG
Operating Temperature	-40°C ~ 115°C
Housing Material	Polyamide (PA66), Nylon 6/6
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Product Status	Active

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0395340513 is determined by the following critical parameters:

Position Count & Pitch: 13 positions at 0.200" (5.08mm) spacing (non-negotiable for mechanical fit)
Connector Type: Plug with female sockets, 180° wire entry orientation
Termination Method: Screw-based rising cage clamp technology
Electrical Ratings: Minimum 15 A current capacity (UL), 300 V voltage rating
Wire Compatibility: Support for 12-30 AWG wire gauge
Housing Material: Polyamide (PA66) with UL94 V-0 flammability rating
Compliance: ROHS3 compliance and active product status

The TE Connectivity AMP Connectors part 1-796634-3 meets these substitution criteria with the following considerations: identical position count, pitch, connector type, wire entry angle, termination style, and housing material. Electrical and thermal specifications remain within acceptable operational ranges for most applications, though minor parameter variations exist.

Parameter Comparison

Parameter	Molex 0395340513	TE Connectivity 1-796634-3
Manufacturer Part Number	0395340513	1-796634-3
Manufacturer	Molex	TE Connectivity AMP Connectors
Number of Positions	13	13
Pitch	0.200" (5.08mm)	0.200" (5.08mm)
Type	Plug, Female Sockets	Plug, Female Sockets
Plug Wire Entry	180°	180°
Termination Style	Screw - Rising Cage Clamp	Screw - Rising Cage Clamp
Mounting Type	Free Hanging (In-Line)	Free Hanging (In-Line)
Current - UL	18 A	15 A
Voltage - UL	300 V	300 V
Wire Gauge - AWG	12-30 AWG	12-30 AWG
Operating Temperature	-40°C ~ 115°C	-40°C ~ 110°C
Housing Material	Polyamide (PA66), Nylon 6/6	Polyamide (PA66), Nylon 6/6
Material Flammability Rating	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Active

Engineering Selection Recommendations

Both the Molex 0395340513 and TE Connectivity 1-796634-3 are active products with ROHS3 compliance and UL94 V-0 flammability certification. The primary differences are:

Current Rating: The Molex part supports 18 A (UL), while the TE Connectivity part supports 15 A (UL). Applications requiring currents between 15–18 A must use the Molex part.
Operating Temperature Range: The Molex part operates to 115°C; the TE Connectivity part to 110°C. High-temperature applications above 110°C require the Molex part.
Contact Finish: Molex uses gold plating; TE Connectivity uses tin plating. Gold plating provides superior corrosion resistance in harsh environments.
Screw Torque: Molex specifies 0.56 Nm; TE Connectivity specifies 0.79 Nm. Installation procedures must follow the respective manufacturer's torque specifications.

Both parts share identical mechanical compatibility (13 positions, 5.08mm pitch, 180° orientation, screw termination, free-hanging mounting) and support the same wire gauge range (12-30 AWG). Selection should be based on application current requirements, temperature limits, and environmental exposure conditions.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 1-796634-3 directly replace the Molex 0395340513 in all applications?

A: Direct replacement is possible for applications operating at currents ≤15 A and temperatures ≤110°C. Applications exceeding these limits require the Molex part to maintain specification compliance.

Q: Are the mechanical dimensions identical between these two parts?

A: Yes. Both parts have 13 positions at 0.200" (5.08mm) pitch, 180° wire entry, free-hanging mounting, and identical housing material (Polyamide PA66). Mechanical interchangeability is confirmed.

Q: What is the impact of different contact finishes (gold vs. tin)?

A: Gold plating (Molex) provides superior corrosion resistance and lower contact resistance over extended service life. Tin plating (TE Connectivity) is suitable for standard industrial environments but may show increased oxidation in high-humidity or corrosive conditions.

Q: Do the different screw torque specifications affect installation?

A: Yes. Installation torque must follow each manufacturer's specification: 0.56 Nm for Molex and 0.79 Nm for TE Connectivity. Using incorrect torque may result in inadequate contact pressure or mechanical damage.

Q: Are both parts RoHS and flammability compliant?

A: Yes. Both parts are ROHS3 compliant and carry UL94 V-0 flammability certification, meeting regulatory requirements for industrial and consumer applications.

Q: What wire gauges are supported by both parts?

A: Both parts support 12-30 AWG wire gauge, ensuring compatibility with standard industrial wiring practices.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message