Equivalent & Substitute Parts for Molex 0395305607 Terminal Block Plug

Part Overview

The Molex 0395305607 is a 7-position terminal block plug with female sockets, 5.08mm pitch, designed for 180° free-hanging in-line applications. This Eurostyle ESE 39530 series component features screw-rising cage clamp termination and operates across -40°C to 115°C. The part is active in production with 796 units in stock. Substitute parts are identified to address inventory availability, lead time requirements, or specific application constraints while maintaining electrical and mechanical compatibility within defined parameter ranges.

Substiute Parts

0395305607

MolexIn Stock: 8900395305607 Datasheet

Current PartRFQ

TJ0771500000G

Amphenol AnytekIn Stock: 2758TJ0771500000G Datasheet

MFR RecommendedRFQ

TJ0771560000G

Amphenol AnytekIn Stock: 2702TJ0771560000G Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0395305607 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Number of positions: 7
• Plug wire entry orientation: 180°
• Mounting type: Free Hanging (In-Line)
• Screw size: M3
• Operating temperature range: -40°C ~ 115°C
• Voltage rating (UL): 300 V
• RoHS compliance: ROHS3 Compliant

Allowable Variation Parameters:

• Pitch tolerance: 0.197" (5.00mm) to 0.200" (5.08mm) — minor pitch variation acceptable within mechanical envelope constraints
• Current rating: 12-20 A — substitute must meet or exceed application current requirements
• Wire gauge range: 12-24 AWG minimum (original supports 12-26 AWG)
• Contact finish: Gold or Tin — both provide adequate electrical performance
• Termination style: Screw or Screw - Rising Cage Clamp — both are compatible screw-based termination methods
• Housing material: Polyamide (PA), Nylon, Thermoplastic, or Thermoplastic Resin — all meet flammability and mechanical requirements

The identified substitute parts TJ0771500000G and TJ0771560000G from Amphenol Anytek satisfy all mandatory parameters and fall within allowable variation ranges.

Parameter Comparison

Engineering Selection Recommendations

Molex 0395305607 (Original): Use when gold contact mating finish is specified for enhanced corrosion resistance or when wire gauge support up to 26 AWG is required. ROHS3 compliant and active in production.

Amphenol Anytek TJ0771500000G: Suitable for applications requiring 20 A current capacity. Features tin contact finish and UL94 V-0 flammability rating. Wire gauge range 12-24 AWG. Pitch variation of 0.003" (0.08mm) is within mechanical tolerance. Termination uses standard screw method. ROHS3 compliant and active in production with higher inventory availability (2710 units).

Amphenol Anytek TJ0771560000G: Suitable for applications with 12 A maximum current requirement. Features screw-rising cage clamp termination matching the original design. Tin contact finish and UL94 V-0 flammability rating. Wire gauge range 12-24 AWG. Pitch variation of 0.003" (0.08mm) is within mechanical tolerance. ROHS3 compliant and active in production with high inventory availability (2634 units).

Selection between substitutes depends on current rating requirements: TJ0771500000G for 12-20 A applications, TJ0771560000G for applications up to 12 A with matching cage clamp termination.

Frequently Asked Questions (FAQ)

Q: Can TJ0771500000G or TJ0771560000G be used as direct replacements for the Molex 0395305607?

A: Both Amphenol Anytek parts are functionally compatible within defined electrical and mechanical parameters. The 0.003" (0.08mm) pitch difference falls within standard mechanical tolerances for terminal block connectors. Verify that your application current requirement does not exceed the substitute part's UL rating: TJ0771500000G supports 20 A, TJ0771560000G supports 12 A.

Q: What is the difference between TJ0771500000G and TJ0771560000G?

A: The primary differences are current rating (20 A vs. 12 A) and termination style. TJ0771500000G uses standard screw termination, while TJ0771560000G uses screw-rising cage clamp termination, matching the original Molex design. Both share identical pitch, position count, wire entry orientation, and operating temperature range.

Q: Does the contact finish difference (gold vs. tin) affect compatibility?

A: Both gold and tin finishes provide adequate electrical conductivity and corrosion resistance for standard industrial applications. Gold offers superior corrosion resistance in high-humidity or corrosive environments. Tin is suitable for standard indoor industrial applications. Contact finish selection depends on environmental exposure requirements, not mechanical compatibility.

Q: Are there wire gauge limitations when using substitute parts?

A: The original Molex 0395305607 supports 12-26 AWG. Both Amphenol Anytek substitutes support 12-24 AWG. If your application requires 25-26 AWG wire, the original part is required. For 12-24 AWG applications, substitutes are compatible.

Q: What is the pitch tolerance impact?

A: The original part specifies 0.200" (5.08mm) pitch; substitutes specify 0.197" (5.00mm) pitch. This 0.003" (0.08mm) difference is within standard mechanical tolerances for terminal block connectors and does not affect mating with standard receptacles or PCB layouts designed for 5mm pitch connectors.

Q: Are all parts ROHS3 compliant?

A: Yes. The Molex 0395305607 and both Amphenol Anytek substitutes are ROHS3 compliant, meeting current environmental and hazardous substance restrictions.