Molex 0395200112 Terminal Block Plug – Equivalent & Substitute Parts

Part Overview

The Molex 0395200112 is a 12-position terminal block plug with female sockets, 5mm pitch, designed for 180° free-hanging in-line applications. This component is part of the Eurostyle ESE 39520 series and is currently in active production status with 706 units in stock. Terminal block plugs are essential interconnection components in industrial control systems, power distribution panels, and modular equipment where reliable screw-clamp termination and quick-disconnect capability are required. Equivalent substitute parts are identified to support procurement flexibility, design standardization across manufacturing facilities, and supply chain continuity.

Substiute Parts

0395200112

MolexIn Stock: 7240395200112 Datasheet

Current PartRFQ

1911952

Phoenix ContactIn Stock: 7861911952 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0395200112 is determined by strict alignment of the following critical parameters:

• Position Count & Pitch: 12 positions at 0.197" (5.00mm) spacing (non-negotiable for mechanical fit)
• Connector Type: Plug with female sockets, 180° wire entry orientation
• Termination Method: Screw-clamp rising cage mechanism
• Electrical Ratings: Current and voltage ratings must meet or exceed UL specifications (18 A, 300 V minimum)
• Wire Gauge Compatibility: 12-30 AWG acceptance range
• Mounting Configuration: Free-hanging in-line orientation
• Material & Safety Compliance: UL94 V-0 flammability rating, ROHS3 compliance, and operating temperature range

The Phoenix Contact 1911952 qualifies as a direct substitute based on matching all critical mechanical and electrical parameters within acceptable engineering tolerances.

Parameter Comparison

Engineering Selection Recommendations

Both the Molex 0395200112 and Phoenix Contact 1911952 are active production components with full ROHS3 compliance and UL94 V-0 flammability certification, meeting modern regulatory requirements for industrial and commercial applications.

The Molex 0395200112 carries a UL current rating of 18 A, while the Phoenix Contact 1911952 is rated at 16 A under UL conditions. For applications requiring the full 18 A capacity, the Molex part is the primary selection. For applications operating at or below 16 A, the Phoenix Contact substitute provides equivalent functionality with identical mechanical fit and electrical safety characteristics.

Both parts accept 12-30 AWG wire, operate across -40°C to 115°C (Molex specified; Phoenix Contact operating temperature not provided in data), and employ identical screw-clamp rising cage termination with M3 screw specification. Torque specifications are within acceptable range: Molex at 0.56 Nm (5.0 Lb-In) and Phoenix Contact at 0.5-0.6 Nm (4.4-5.3 Lb-In).

Selection between these parts should be based on current requirement alignment with the application circuit and procurement availability.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1911952 be used in place of the Molex 0395200112 in all applications?

A: The Phoenix Contact 1911952 is mechanically and electrically compatible for applications requiring 16 A or less at 300 V. Applications requiring the full 18 A capacity of the Molex part require the original specification. Both parts share identical pitch, position count, wire entry orientation, and termination method.

Q: What are the key differences between these two parts?

A: The primary difference is the UL current rating: Molex 0395200112 at 18 A versus Phoenix Contact 1911952 at 16 A. Secondary differences include housing color (Molex black, Phoenix Contact green), wire strip length (Molex 6.5mm, Phoenix Contact 7mm), and screw torque specification range. All other critical parameters—pitch, position count, voltage rating, flammability, and compliance certifications—are identical.

Q: Are these parts interchangeable in existing designs?

A: Yes, for applications operating at 16 A or below. The identical 5mm pitch, 12-position configuration, 180° wire entry, and free-hanging mounting ensure mechanical fit compatibility. Electrical compatibility is confirmed for circuits rated at or below 16 A. Designs requiring 18 A operation must use the Molex 0395200112.

Q: What is the wire gauge compatibility for both parts?

A: Both the Molex 0395200112 and Phoenix Contact 1911952 accept wire gauges from 12 AWG to 30 AWG, with the Phoenix Contact also specifying metric equivalents of 0.2-2.5 mm². This range covers standard industrial control wiring applications.

Q: Do both parts meet current safety and environmental standards?

A: Yes. Both parts are ROHS3 compliant, carry UL94 V-0 flammability certification, and are in active production status. Both are rated for -40°C to 115°C operation (Molex specified; Phoenix Contact operating temperature range not provided in available data). Both carry Moisture Sensitivity Level 1 (unlimited shelf life).