Molex 0395137813 Terminal Block Plug – Equivalent & Substitute Parts

Part Overview

The Molex 0395137813 is a 13-position terminal block plug with female sockets, 0.150" (3.81mm) pitch, and 270° free-hanging wire entry. This component is classified as Active and is designed for screw-terminal applications requiring secure wire connections in industrial control and automation systems. Substitute parts are identified when equivalent electrical ratings, mechanical compatibility, and certification status align with the original specification, enabling component interchangeability in system design and procurement scenarios.

Substiute Parts

0395137813

MolexIn Stock: 10650395137813 Datasheet

Current PartRFQ

1827237

Phoenix ContactIn Stock: 8421827237 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0395137813 is determined by the following critical parameters:

• Position Count & Pitch: Substitute parts must maintain 13 positions at 0.150" (3.81mm) pitch to ensure mechanical and electrical compatibility with mating connectors.
• Electrical Ratings: Current and voltage ratings must meet or exceed UL specifications (8 A, 300 V minimum).
• Termination Method: Screw-terminal rising cage clamp technology is required for consistent wire retention and electrical performance.
• Housing Material & Flammability: Polyamide construction with UL94 V-0 rating ensures compliance with safety standards.
• Wire Entry Orientation: While the main part specifies 270° entry, substitute parts with alternative orientations (such as 90°) may be considered if system layout permits mechanical accommodation.
• Compliance Status: RoHS3 compliance and Active product status are mandatory for new designs and procurement.

The Phoenix Contact 1827237 qualifies as a substitute based on matching position count, pitch, electrical ratings, termination style, housing material, and compliance certifications, with the primary design difference being wire entry angle (90° versus 270°).

Parameter Comparison

Engineering Selection Recommendations

Both the Molex 0395137813 and Phoenix Contact 1827237 maintain Active product status and full RoHS3 compliance, qualifying both for current design implementations. Selection between these parts is determined by system-level mechanical constraints:

• Molex 0395137813: Select when 270° wire entry orientation is required by PCB layout or enclosure design. Supports wire gauges 16-30 AWG with specified operating temperature range of -40°C to 115°C.

• Phoenix Contact 1827237: Select when 90° wire entry orientation accommodates system geometry. Supports extended wire gauge range (14-30 AWG) and provides equivalent electrical performance. Operating temperature specification is not provided in available documentation.

Both parts employ identical termination technology (screw-rising cage clamp), maintain equivalent electrical ratings (8 A, 300 V UL), and share polyamide housing with UL94 V-0 flammability rating. The wire entry angle represents the primary design differentiator and must be evaluated against specific application requirements.

Frequently Asked Questions (FAQ)

Q: Can Phoenix Contact 1827237 directly replace Molex 0395137813 in existing assemblies?

A: Direct replacement depends on wire entry orientation compatibility. The Phoenix Contact part features 90° entry versus the Molex part's 270° entry. If the existing system accommodates 90° wire routing, mechanical substitution is feasible. Electrical performance and connector mating are equivalent.

Q: Are the electrical ratings identical between these parts?

A: Yes. Both parts are rated for 8 A current and 300 V voltage under UL standards. Both support 13-position, 0.150" (3.81mm) pitch configurations with screw-terminal rising cage clamp termination.

Q: What is the significance of wire gauge range differences?

A: The Molex part supports 16-30 AWG, while the Phoenix Contact part supports 14-30 AWG. The Phoenix Contact part accommodates larger diameter conductors (14 AWG). Selection should align with the wire gauges specified in the system design.

Q: Are both parts suitable for new designs?

A: Yes. Both parts maintain Active product status and ROHS3 compliance, meeting current regulatory and procurement requirements for new product development.

Q: What is the primary design consideration when selecting between these substitutes?

A: Wire entry orientation (270° versus 90°) is the critical design parameter. This must align with PCB layout, enclosure geometry, and cable routing requirements. All other electrical and mechanical specifications are equivalent or compatible.