Molex 0395132913 Terminal Block Plug – Equivalent & Substitute Parts

Part Overview

The Molex 0395132913 is a 13-position terminal block plug with female sockets, 0.150" (3.81mm) pitch, and 270° free-hanging wire entry. This component is part of the Eurostyle ESE 39513 series and is currently active in production. Terminal block plugs of this specification are essential in industrial control systems, automation equipment, and modular electrical assemblies where reliable screw-clamp termination and standardized pitch spacing are required. Substitute parts may be necessary due to inventory constraints, regional availability, or system redesign requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

0395132913

MolexIn Stock: 10540395132913 Datasheet

Current PartRFQ

1827237

Phoenix ContactIn Stock: 8421827237 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0395132913 is determined by the following critical parameters:

• Position Count & Pitch: Substitute must have 13 positions at 0.150" (3.81mm) pitch to ensure mechanical and electrical compatibility with mating connectors and PCB layouts.
• Connector Type: Must be a plug with female sockets to maintain proper mating with standard terminal block receptacles.
• Termination Method: Screw-clamp rising cage termination is required for consistent wire retention and electrical contact.
• Mounting Configuration: Free-hanging (in-line) orientation is mandatory for this application class.
• Electrical Ratings: Minimum 8 A current capacity and 300 V voltage rating (UL) are required to meet system specifications.
• Wire Gauge Compatibility: Acceptable wire gauge range must overlap with or encompass 16-30 AWG to support existing wiring infrastructure.
• Regulatory Compliance: RoHS3 compliance and UL94 V-0 flammability rating are mandatory for industrial applications.

The Phoenix Contact 1827237 qualifies as a substitute based on these criteria, with the exception of wire entry angle (90° versus 270°), which represents a mechanical design variation that may require system-level evaluation.

Parameter Comparison

Engineering Selection Recommendations

Both the Molex 0395132913 and Phoenix Contact 1827237 are active production components with ROHS3 compliance and UL94 V-0 flammability certification, meeting regulatory requirements for industrial terminal block applications.

The primary distinction between these parts is the wire entry angle: the Molex part features 270° entry (free-hanging configuration with wire approaching from the rear), while the Phoenix Contact part features 90° entry (wire approaching from the side). This difference affects physical installation geometry and cable routing within the enclosure or assembly.

Selection between these parts should be based on:

• Physical Space Constraints: The 270° entry of the Molex part is suited for rear-mounted wire entry; the 90° entry of the Phoenix Contact part accommodates side-mounted wire entry.
• Wire Gauge Compatibility: The Phoenix Contact part accepts 14-30 AWG (broader range), while the Molex part accepts 16-30 AWG. If 14-15 AWG conductors are required, the Phoenix Contact part is necessary.
• Inventory Availability: Molex 0395132913 has 1040 units in stock; Phoenix Contact 1827237 has 767 units in stock.

Both parts maintain equivalent electrical performance (8 A, 300 V UL rating) and mechanical compatibility (13 positions, 3.81mm pitch, screw-clamp termination).

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1827237 directly replace the Molex 0395132913 in an existing assembly?

A: Electrical and mechanical compatibility is maintained. However, the 90° wire entry angle differs from the original 270° configuration. Physical installation geometry must be evaluated to confirm that cable routing and enclosure space accommodate the different wire approach angle.

Q: What is the significance of the wire gauge range difference (16-30 AWG vs. 14-30 AWG)?

A: The Phoenix Contact part accepts a broader wire gauge range, including 14-15 AWG conductors. If your system uses only 16-30 AWG wiring, both parts are functionally equivalent. If 14-15 AWG conductors are present, only the Phoenix Contact part is suitable.

Q: Are the screw torque specifications compatible?

A: Yes. The Molex part specifies 0.23 Nm (2.0 Lb-In), while the Phoenix Contact part specifies 0.22-0.25 Nm (1.9-2.2 Lb-In). These ranges overlap and are compatible with standard installation procedures.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both parts are ROHS3 compliant and carry UL94 V-0 flammability certification, meeting industrial safety and environmental requirements.

Q: What is the difference in insulation height between the two parts?

A: The Molex part has an insulation height of 0.750" (19.05mm), while the Phoenix Contact part is 0.752" (19.10mm). This 0.002" difference is negligible for standard mounting applications and does not affect compatibility.

Q: Can I use the Phoenix Contact part if my system specifies the Molex part number?

A: Substitution is permissible only if the 90° wire entry angle is compatible with your physical installation. Electrical and mechanical specifications are equivalent. System-level design review is recommended to confirm wire routing feasibility.