Molex 0395132013 Terminal Block Plug – Equivalent & Substitute Parts

Part Overview

The Molex 0395132013 is a 13-position terminal block plug with female sockets, 0.150" (3.81mm) pitch, and 270° free-hanging wire entry. This component is used in industrial control systems, automation equipment, and modular electrical interconnection applications where screw-cage clamp termination and inline mounting are required. The part is currently active in production with 1052 units in stock. Substitute parts may be required due to supply constraints, regional availability, or specific application requirements that align with the electrical and mechanical parameters of this product category.

Substiute Parts

0395132013

MolexIn Stock: 10900395132013 Datasheet

Current PartRFQ

1827237

Phoenix ContactIn Stock: 8421827237 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0395132013 is determined by the following critical parameters:

• Position Count & Pitch: 13 positions at 0.150" (3.81mm) spacing (non-negotiable for mechanical compatibility)
• Connector Type: Plug with female sockets (required for mating with standard Eurostyle receptacles)
• Termination Method: Screw-cage clamp rising cage design (ensures consistent wire retention and electrical contact)
• Mounting Configuration: Free-hanging inline orientation (required for panel-mount applications)
• Electrical Ratings: Minimum 8 A current capacity and 300 V voltage rating (UL standard)
• Wire Gauge Compatibility: Support for 16-30 AWG wire range (or equivalent metric range)
• Environmental Compliance: UL94 V-0 flammability rating and ROHS3 compliance (mandatory for regulated industries)

The Phoenix Contact 1827237 qualifies as a manufacturer-recommended substitute based on these parameters. The primary difference is the wire entry angle (90° versus 270°), which affects physical installation orientation but does not impact electrical performance or connector compatibility when the application layout permits this configuration change.

Parameter Comparison

Engineering Selection Recommendations

Primary Part (Molex 0395132013): Select this part when 270° wire entry orientation is required by the application design. The part is active in production with adequate inventory (1052 units). Full compliance with UL and ROHS3 standards is confirmed.

Substitute Part (Phoenix Contact 1827237): Select this part when:

• 90° wire entry orientation is compatible with the installation layout
• Supply of the primary part is unavailable
• The application permits wire entry from a different angle without redesign

Both parts meet identical electrical performance requirements (8 A, 300 V, UL94 V-0). The Phoenix Contact part extends wire gauge compatibility to 14 AWG, providing additional flexibility for applications using finer conductors. Torque specifications are functionally equivalent within normal assembly tolerances.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1827237 be used as a direct drop-in replacement for the Molex 0395132013?

A: Electrical and mechanical compatibility is confirmed for both parts. The primary difference is wire entry angle (90° versus 270°). Direct substitution is possible only if the application layout accommodates the different wire entry orientation. Physical panel cutouts and wire routing must be verified before installation.

Q: Are there any differences in screw torque specifications between these parts?

A: The Molex part specifies 0.23 Nm (2.0 Lb-In) torque. The Phoenix Contact part specifies 0.22-0.25 Nm (1.9-2.2 Lb-In). These ranges overlap and are functionally equivalent for assembly purposes. Standard assembly procedures apply to both parts.

Q: What wire gauges are supported by each part?

A: The Molex 0395132013 supports 16-30 AWG. The Phoenix Contact 1827237 supports 14-30 AWG, offering compatibility with finer gauge conductors. Both parts accommodate the standard industrial wire range for this connector class.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are UL94 V-0 rated and ROHS3 compliant. Both carry identical electrical ratings (8 A, 300 V UL). Compliance documentation is equivalent for regulated applications.

Q: What is the significance of the pitch specification?

A: The 0.150" (3.81mm) pitch is the center-to-center distance between adjacent contact positions. This specification must remain constant for mechanical compatibility with mating receptacles. Both parts maintain identical pitch, ensuring interchangeability with standard Eurostyle receptacles.

Q: Are there inventory considerations for selecting between these parts?

A: The Molex 0395132013 has 1052 units in stock. The Phoenix Contact 1827237 has 767 units in stock. Both parts are available for immediate delivery. Selection should prioritize the wire entry angle requirement for your specific application.