Molex 0395105708 8-Position Terminal Block Plug Equivalent & Substitute Parts

Part Overview

The Molex 0395105708 is an 8-position terminal block plug with female sockets, 0.150" (3.81mm) pitch, designed for 180° free-hanging in-line applications. This component features screw-rising cage clamp termination and is rated for 8A at 300V UL. The part is active and in stock with 977 units available.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when supply chain optimization is required, or when design flexibility allows for alternative manufacturers meeting identical electrical and mechanical specifications.

Substiute Parts

0395105708
MolexIn Stock: 10280395105708 Datasheet
0395105708
Current Part
1792910000
WeidmüllerIn Stock: 9451792910000 Datasheet
1792910000
MFR Recommended
1803633
Phoenix ContactIn Stock: 35271803633 Datasheet
1803633
MFR Recommended
5447926
Phoenix ContactIn Stock: 14745447926 Datasheet
5447926
MFR Recommended

Key Parameters

Parameter Value
Number of Positions 8
Pitch 0.150" (3.81mm)
Type Plug, Female Sockets
Mounting Type Free Hanging (In-Line)
Plug Wire Entry 180°
Current Rating (UL) 8A
Voltage Rating (UL) 300V
Wire Gauge 16-30 AWG
Operating Temperature -40°C ~ 115°C
Material Flammability UL94 V-0
Color Green
Insulation Height 0.437" (11.10mm)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict compliance with the following parameters:

  • Electrical Compatibility: Current and voltage ratings must meet or exceed UL specifications (8A minimum at 300V minimum)
  • Mechanical Compatibility: 8-position configuration, 0.150" (3.81mm) pitch, 180° wire entry, free-hanging mounting
  • Physical Compatibility: Insulation height of 0.437" (11.10mm), green color, female socket type
  • Environmental Compliance: UL94 V-0 flammability rating, RoHS compliance status
  • Termination Interface: Screw-based termination with compatible torque specifications

All substitute parts listed meet these core requirements and are functionally interchangeable with the Molex 0395105708 in applications where these parameters are specified.

Parameter Comparison

Parameter Molex 0395105708 Weidmüller 1792910000 Phoenix Contact 1803633 Phoenix Contact 5447926
Manufacturer Molex Weidmüller Phoenix Contact Phoenix Contact
Series Eurostyle ESE 39510 Omnimate BC COMBICON MC BCP
Number of Positions 8 8 8 8
Pitch 0.150" (3.81mm) 0.150" (3.81mm) 0.150" (3.81mm) 0.150" (3.81mm)
Type Plug, Female Sockets Plug, Female Sockets Plug, Female Sockets Plug, Female Sockets
Mounting Type Free Hanging (In-Line) Free Hanging (In-Line) Free Hanging (In-Line) Free Hanging (In-Line)
Plug Wire Entry 180° 180° 180° 180°
Current Rating (UL) 8A 10A 8A 8A
Voltage Rating (UL) 300V 300V 300V 300V
Wire Gauge (AWG) 16-30 16-28 14-30 14-30
Operating Temperature -40°C ~ 115°C -50°C ~ 120°C Not specified Not specified
Material Flammability UL94 V-0 UL94 V-0 UL94 V-0 UL94 V-0
Insulation Height 0.437" (11.10mm) 0.437" (11.10mm) 0.437" (11.10mm) 0.437" (11.10mm)
Color Green Green Green Green
RoHS Status ROHS3 Compliant RoHS Compliant ROHS3 Compliant ROHS3 Compliant
Product Status Active Active Active Active
Current Inventory 977 Pcs 898 Pcs 3421 Pcs 1404 Pcs

Engineering Selection Recommendations

All four parts listed are active products with current manufacturing status and full RoHS compliance. Selection among these equivalents should be based on the following factors:

Molex 0395105708: Primary specification reference. Established supply with 977 units in stock. ROHS3 compliant with MSL rating of 1 (Unlimited).

Weidmüller 1792910000: Offers higher current capacity (10A UL) and extended operating temperature range (-50°C ~ 120°C). Uses clamping yoke termination with IP20 ingress protection. Wire gauge range is 16-28 AWG. Suitable for applications requiring enhanced thermal performance.

Phoenix Contact 1803633: Matches core electrical specifications (8A, 300V UL). Supports wider wire gauge range (14-30 AWG, 0.14-1.5mm²). ROHS3 compliant with MSL rating of 1. Largest current inventory (3421 units).

Phoenix Contact 5447926: Matches core electrical specifications (8A, 300V UL). Supports wire gauge range 14-30 AWG (0.2-1.5mm²). ROHS3 compliant with MSL rating of 1. REACH Affected status noted.

All parts meet UL94 V-0 flammability requirements and maintain identical mechanical form factor and pitch specifications.

Frequently Asked Questions (FAQ)

Q: Can Weidmüller 1792910000 be used as a direct replacement for Molex 0395105708?

A: Yes. Both parts share identical pitch (3.81mm), position count (8), mounting type (free-hanging in-line), wire entry angle (180°), voltage rating (300V UL), and flammability rating (UL94 V-0). The Weidmüller part provides higher current capacity (10A vs 8A) and extended temperature range, making it functionally compatible and suitable for direct substitution.

Q: What is the difference between the two Phoenix Contact options (1803633 and 5447926)?

A: Both Phoenix Contact parts meet identical electrical specifications (8A, 300V UL) and mechanical requirements. The primary difference is REACH status: 1803633 is REACH Unaffected, while 5447926 is REACH Affected. Both support 14-30 AWG wire gauge and maintain the same pitch, position count, and form factor.

Q: Are there wire gauge compatibility considerations when substituting parts?

A: Yes. The Molex 0395105708 accepts 16-30 AWG wire. Weidmüller 1792910000 accepts 16-28 AWG. Both Phoenix Contact parts accept 14-30 AWG. If your application uses 14-15 AWG wire, only Phoenix Contact parts are suitable. If your application uses 29-30 AWG wire, Weidmüller is not suitable.

Q: Do all substitute parts have the same screw torque specification?

A: No. Molex specifies 0.23 Nm (2.0 Lb-In). Weidmüller specifies 0.2-0.25 Nm (1.7-2.2 Lb-In). Phoenix Contact parts specify 0.22-0.25 Nm (1.9-2.2 Lb-In). Verify torque requirements for your assembly process.

Q: Which substitute part has the best inventory availability?

A: Phoenix Contact 1803633 has the highest current inventory with 3421 units in stock, compared to 977 units for Molex, 898 units for Weidmüller, and 1404 units for Phoenix Contact 5447926.

Q: Are all parts RoHS compliant?

A: Yes. Molex 0395105708 and both Phoenix Contact parts are ROHS3 compliant. Weidmüller 1792910000 is RoHS compliant. All parts meet RoHS requirements for this product category.

Request Quote (Ships tomorrow)