Molex 0395105613 Terminal Block Plug – Equivalent & Substitute Parts

Part Overview

The Molex 0395105613 is a 13-position terminal block plug with female sockets, designed for 0.150" (3.81mm) pitch applications. This component features screw-rising cage clamp termination, 180° free-hanging in-line mounting, and operates across -40°C to 115°C. The part is active in production with 1062 units currently in stock. Alternative components may be required due to supply constraints, design standardization across manufacturing facilities, or specific application requirements for enhanced electrical ratings or environmental performance.

Substiute Parts

0395105613

MolexIn Stock: 11070395105613 Datasheet

Current PartRFQ

1899440000

WeidmüllerIn Stock: 11051899440000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0395105613 is determined by the following critical parameters:

• Position Count & Pitch: Substitute must provide 13 positions at 0.150" (3.81mm) pitch to ensure mechanical and electrical compatibility with mating connectors.
• Connector Type & Orientation: Substitute must be a plug with female sockets and 180° wire entry to maintain in-line free-hanging mounting configuration.
• Electrical Ratings: Substitute must meet or exceed UL voltage (300 V) and current (8 A) specifications to ensure safe operation in the target circuit.
• Termination Method: Substitute must use screw-based termination to maintain compatibility with existing wiring practices and installation procedures.
• Wire Gauge Compatibility: Substitute wire gauge range must accommodate 16-30 AWG conductors or equivalent metric range.
• Environmental & Compliance: Substitute must maintain UL94 V-0 flammability rating and RoHS compliance for regulatory alignment.

The Weidmüller 1899440000 qualifies as a direct substitute based on these parameters.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: Molex 0395105613 remains the specified component for new designs and production runs where supply is available. Active product status and established design validation support continued use.

Substitute Selection: Weidmüller 1899440000 is qualified as a direct substitute when Molex 0395105613 is unavailable. The substitute meets all critical electrical and mechanical parameters, with enhanced current rating (10 A vs. 8 A) and extended operating temperature range (-50°C to 120°C vs. -40°C to 115°C). Both components maintain UL94 V-0 flammability compliance and unlimited moisture sensitivity rating.

Selection Constraint: Applications requiring wire gauges of 29-30 AWG must verify compatibility with the Weidmüller substitute, which supports 16-28 AWG. For such applications, alternative substitutes or the original Molex component must be sourced.

Frequently Asked Questions (FAQ)

Q: Can the Weidmüller 1899440000 directly replace the Molex 0395105613 in existing assemblies?

A: Yes, for applications using wire gauges 16-28 AWG. Both components share identical position count (13), pitch (3.81mm), connector type (plug with female sockets), wire entry orientation (180°), mounting configuration (free-hanging in-line), and voltage rating (300 V UL). The Weidmüller substitute provides higher current capacity (10 A vs. 8 A) and wider operating temperature range, making it functionally compatible for the specified electrical requirements.

Q: What is the key difference in termination design between these two parts?

A: The Molex 0395105613 uses a rising cage clamp termination mechanism, while the Weidmüller 1899440000 employs a clamping yoke with tension sleeve design. Both are screw-based termination systems suitable for 16-28 AWG (Weidmüller) or 16-30 AWG (Molex) conductors. Installation procedures may differ; consult manufacturer documentation for specific torque and wire preparation requirements.

Q: Are there wire gauge limitations when substituting?

A: Yes. The Molex 0395105613 accommodates 16-30 AWG wire, while the Weidmüller 1899440000 supports 16-28 AWG. Applications using 29-30 AWG conductors cannot use the Weidmüller substitute without design modification or alternative component selection.

Q: Do both components meet the same regulatory compliance standards?

A: Both components are UL94 V-0 flammable and maintain unlimited moisture sensitivity (MSL 1). The Molex part is ROHS3 compliant, while the Weidmüller part is RoHS compliant. Both meet ECCN EAR99 and HTSUS 8536.90.4000 classifications. Verify specific regional compliance requirements for your application.

Q: What is the inventory status for each component?

A: Molex 0395105613 has 1062 units in stock. Weidmüller 1899440000 has 1025 units in stock. Both are available as new original components in bulk packaging.