Molex 0387008721 Equivalent & Substitute Parts

Part Overview

The Molex 0387008721 is a 21-circuit barrier block connector with 0.325" (8.26mm) pitch, designed for through-hole mounting with screw termination and captive plate. This component operates at 20A current rating and 300V voltage rating, supporting wire gauges from 12-22 AWG. The part is classified as obsolete, making identification of suitable substitutes essential for ongoing system maintenance and new design implementations where this connector type is specified.

Substiute Parts

0387008721
MolexIn Stock: 10320387008721 Datasheet
0387008721
Current Part
0387007521
MolexIn Stock: 12530387007521 Datasheet
0387007521
MFR Recommended

Key Parameters

Parameter Value
Manufacturer Part Number 0387008721
Manufacturer Molex
Category Terminal Blocks
Series Beau 38700
Terminal Block Type Barrier Block
Number of Circuits 21
Pitch 0.325" (8.26mm)
Current Rating 20A
Voltage Rating 300V
Wire Gauge Range 12-22 AWG
Top Termination Screws with Captive Plate
Bottom Termination PC Pin
Barrier Type 2 Wall (Dual)
Mounting Type Through Hole
Product Status Obsolete
RoHS Status ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution for the Molex 0387008721 is determined by strict equivalence across the following critical parameters:

  • Circuit Configuration: 21 circuits with matching pitch of 0.325" (8.26mm)
  • Electrical Ratings: 20A current rating and 300V voltage rating
  • Termination Style: Screw termination with captive plate on top; PC pin on bottom
  • Barrier Configuration: 2 Wall (Dual) barrier type
  • Mounting: Through-hole mounting compatibility
  • Mechanical Compatibility: Single-row configuration with identical connector footprint

The substitute part Molex 0387007521 maintains all critical electrical and mechanical parameters required for direct substitution. The primary distinction is product status: the substitute is active production, whereas the original part is obsolete. Wire gauge compatibility differs slightly (14-22 AWG vs. 12-22 AWG), representing a narrower but overlapping range suitable for most applications within the specified current and voltage envelope.

Parameter Comparison

Parameter 0387008721 (Original) 0387007521 (Substitute)
Manufacturer Molex Molex
Series Beau 38700 Beau 38700
Terminal Block Type Barrier Block Barrier Block
Number of Circuits 21 21
Pitch 0.325" (8.26mm) 0.325" (8.26mm)
Current Rating 20A 20A
Voltage Rating 300V 300V
Wire Gauge Range 12-22 AWG 14-22 AWG
Top Termination Screws with Captive Plate Screws with Captive Plate
Bottom Termination PC Pin PC Pin
Barrier Type 2 Wall (Dual) 2 Wall (Dual)
Mounting Type Through Hole Through Hole
Color Black Black
Operating Temperature 110°C -40°C ~ 130°C
Material - Insulation Thermoplastic Thermoplastic
Product Status Obsolete Active
RoHS Status ROHS3 Compliant ROHS3 Compliant
MSL Rating 1 (Unlimited) 1 (Unlimited)

Engineering Selection Recommendations

The Molex 0387007521 is the direct substitute for the obsolete Molex 0387008721. Both components are ROHS3 compliant and share identical electrical ratings, circuit configuration, and mechanical footprint. The substitute part is in active production status, ensuring availability for new designs and replacement applications.

The substitute offers an extended operating temperature range (-40°C to 130°C versus 110°C maximum for the original), providing greater thermal margin in demanding environments. The wire gauge specification of 14-22 AWG on the substitute is narrower than the original 12-22 AWG range; applications requiring 12 AWG termination must evaluate alternative solutions or confirm compatibility with the substitute's minimum gauge specification.

Both parts carry identical electrical certifications and compliance ratings, supporting direct substitution in applications where the original part was specified.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0387007521 be used as a direct replacement for the 0387008721?

A: Yes. Both parts share identical circuit count (21), pitch (0.325"), electrical ratings (20A, 300V), termination style, and mounting configuration. The substitute is the manufacturer-recommended replacement for the obsolete original part.

Q: What is the difference in wire gauge compatibility?

A: The original part accepts 12-22 AWG wire, while the substitute accepts 14-22 AWG. Applications using 12 AWG conductors must confirm compatibility with the substitute or identify alternative solutions.

Q: Are there any compliance or certification differences?

A: Both parts are ROHS3 compliant with identical MSL ratings (1 - Unlimited). No compliance differences exist between the original and substitute.

Q: Does the extended operating temperature range of the substitute affect compatibility?

A: No. The substitute's operating range of -40°C to 130°C encompasses the original part's 110°C maximum, providing equal or superior thermal performance in all applications where the original was used.

Q: What is the packaging difference between these parts?

A: The original part was supplied in unspecified packaging. The substitute is supplied in bulk packaging, which may affect procurement and handling procedures but does not alter electrical or mechanical compatibility.

Q: Are both parts from the same manufacturer series?

A: Yes. Both parts belong to the Molex Beau 38700 series, confirming design and manufacturing continuity.

Request Quote (Ships tomorrow)