Molex 0366380005 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Molex 0366380005 is a rectangular connector header designed for board edge applications with 48 positions arranged in 4 rows. This component features through-hole, right-angle mounting with solder termination and latch lock fastening. The part is classified as obsolete, making identification of active equivalent components essential for ongoing production and maintenance applications. The substitute part 5007620483 represents the current active alternative from Molex's connector portfolio.

Substiute Parts

0366380005

MolexIn Stock: 8530366380005 Datasheet

Current PartRFQ

5007620483

MolexIn Stock: 25025007620483 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The Molex 5007620483 qualifies as a direct substitute for the 0366380005 based on the following critical parameters:

Matching Parameters:

• Connector type: Header
• Contact type: Male Pin
• Position count: 48 positions in 4 rows
• Mounting configuration: Board Edge, Through Hole, Right Angle
• Termination method: Solder
• Fastening mechanism: Latch Lock
• Shrouding design: Shrouded - 4 Wall
• Contact finish: Tin on both mating and post surfaces
• Insulation material: Polybutylene Terephthalate (PBT), Glass Filled
• Insulation color: Brown
• Style: Board to Cable/Wire
• Compliance: ROHS3 Compliant, REACH Unaffected
• Moisture sensitivity: MSL 1 (Unlimited)
• Application domain: Automotive

Distinguishing Characteristics:

• Insulation height: 0366380005 measures 1.205" (30.61mm); 5007620483 measures 1.063" (27.00mm)
• Contact material: 0366380005 uses Brass; 5007620483 uses Copper Alloy
• Product status: 0366380005 is Obsolete; 5007620483 is Active
• Features: 5007620483 includes Board Guide and Board Lock in addition to Mounting Flange

Parameter Comparison

Engineering Selection Recommendations

The Molex 5007620483 is the manufacturer-recommended substitute for the obsolete 0366380005. Both components maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for automotive applications. The substitute part is currently in active production with 2400 units in stock, compared to 746 units of the obsolete part.

The primary design differences are the reduced insulation height (27.00mm versus 30.61mm) and the contact material composition (Copper Alloy versus Brass). The substitute incorporates additional features including Board Guide and Board Lock mechanisms. These modifications represent engineering refinements in the CMC connector series evolution from the 36638 to the 500762 base product number.

For new designs and production transitions, the 5007620483 is the appropriate selection. For legacy system maintenance where the original 0366380005 dimensions are critical to board layout, physical compatibility must be confirmed before substitution.

Frequently Asked Questions (FAQ)

Q: Can the Molex 5007620483 directly replace the 0366380005 in existing assemblies?

A: The 5007620483 shares all critical functional parameters with the 0366380005, including position count, mounting type, termination method, and fastening mechanism. However, the reduced insulation height (27.00mm versus 30.61mm) may affect board layout compatibility. Physical clearance verification is necessary before substitution in existing designs.

Q: What is the significance of the insulation height difference?

A: The insulation height difference of 3.61mm reflects design refinement in the CMC connector series. This dimension affects the overall profile of the connector assembly and may impact mating with corresponding receptacles or cable assemblies designed for the original 30.61mm height.

Q: Are there differences in electrical performance between the two parts?

A: Both parts feature identical contact finish (Tin), shrouding design (Shrouded - 4 Wall), and termination method (Solder). The contact material differs (Brass versus Copper Alloy), but both materials are suitable for automotive applications with equivalent electrical performance characteristics.

Q: Why is the 0366380005 classified as obsolete?

A: The 0366380005 has been superseded by the 5007620483 in Molex's active product portfolio. The substitute represents the current manufacturing standard for this connector category and is recommended for all new applications.

Q: What packaging differences exist between these parts?

A: The 0366380005 packaging specification is not provided in the technical data. The 5007620483 is supplied in Tray packaging, which is standard for high-volume automotive connector applications.

Q: Are both parts suitable for automotive applications?

A: Both the 0366380005 and 5007620483 are designated for automotive applications. Both maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, meeting automotive industry standards.