Littelfuse 0362007.H Glass Cartridge Fuse 7A 125VAC 8AG Equivalent & Substitute Parts

Part Overview

The Littelfuse 0362007.H is a 7 A, 125 V AC/DC glass cartridge fuse in the 8AG form factor (1/4" x 1"). This component is classified as obsolete and requires a fuse holder for installation. Due to its obsolete product status, equivalent substitute parts from active manufacturers are necessary for new designs and ongoing system maintenance where the original part is no longer readily available through standard distribution channels.

Substiute Parts

0362007.H

Littelfuse Inc.In Stock: 11070362007.H Datasheet

Current PartRFQ

BK/AGX-7

Eaton - Electronics DivisionIn Stock: 986BK/AGX-7 Datasheet

DirectRFQ

AGX-7

Eaton - Electronics DivisionIn Stock: 881AGX-7 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Littelfuse 0362007.H are qualified based on the following electrical and mechanical parameters:

• Current Rating: 7 A (exact match required)
• Fuse Type: Cartridge, Glass (exact match required)
• Package / Case: 8AG, 1/4" x 1" (exact match required)
• Mounting Type: Requires Holder (exact match required)
• Response Time: Fast Blow (exact match required)
• Size / Dimension: 0.250" Dia x 1.000" L (exact match required)

The substitute parts identified are manufactured by Eaton - Electronics Division and maintain identical mechanical compatibility and current-carrying characteristics. The primary difference is the voltage rating, which is elevated in the substitute parts to 250 V AC, providing broader application compatibility while maintaining the same 7 A current rating and fast-blow response characteristic.

Parameter Comparison

Engineering Selection Recommendations

Both Eaton AGX-7 and BK/AGX-7 fuses are direct mechanical and electrical substitutes for the obsolete Littelfuse 0362007.H. The substitute parts are manufactured by an active supplier with current product status, ensuring long-term availability and supply chain continuity.

The Eaton AGX series fuses carry cULus approval certification, providing recognized safety compliance for applications requiring third-party validation. The elevated voltage rating of 250 V AC in the substitute parts is compatible with 125 V AC circuits, as fuses rated for higher voltages operate safely at lower voltage levels within their current rating specification.

Both AGX-7 variants maintain identical mechanical form factor, current rating, and fast-blow response characteristics, ensuring direct interchangeability in existing 8AG fuse holder installations. The choice between BK/AGX-7 and AGX-7 depends on packaging requirements and inventory availability, as both parts are electrically and mechanically equivalent.

Frequently Asked Questions (FAQ)

Q: Can the Eaton AGX-7 fuses be used as direct replacements for the Littelfuse 0362007.H?

A: Yes. Both AGX-7 and BK/AGX-7 are direct mechanical and electrical substitutes. They maintain identical current rating (7 A), fuse type (cartridge glass), package form factor (8AG, 1/4" x 1"), and response time (fast blow). The 250 V AC rating is compatible with 125 V AC applications.

Q: What is the difference between BK/AGX-7 and AGX-7?

A: Both parts are electrically and mechanically identical. The primary difference is packaging: BK/AGX-7 is supplied in bulk packaging, while AGX-7 is supplied in standard packaging. Both are manufactured by Eaton - Electronics Division and carry cULus approval.

Q: Why is the voltage rating higher on the substitute parts?

A: The Eaton AGX series is rated for 250 V AC, which is a standard rating for this fuse category. Fuses rated for higher voltages are suitable for use in lower voltage applications within their current rating specification. This provides broader application compatibility without compromising safety or performance.

Q: Are the substitute fuses compatible with existing 8AG fuse holders?

A: Yes. The substitute parts maintain the exact mechanical dimensions (0.250" Dia x 1.000" L) and 8AG form factor, ensuring direct compatibility with any fuse holder designed for 8AG cartridge fuses.

Q: What certifications do the substitute parts carry?

A: The Eaton AGX-7 and BK/AGX-7 fuses carry cULus approval certification, providing recognized safety compliance for regulated applications.