Molex 0350230013 Equivalent & Substitute Parts

Part Overview

The Molex 0350230013 is a 13-position board-in rectangular connector housing with 2.00mm pitch, designed for through-hole, right-angle mounting applications. This connector operates across the industrial temperature range of -40°C to 105°C and utilizes crimp contact termination. The part is currently active in production and maintains full RoHS3 compliance. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling direct functional replacement in circuit board assemblies.

Substiute Parts

0350230013

MolexIn Stock: 7700350230013 Datasheet

Current PartRFQ

10156612-1300LF

Amphenol ICC (FCI)In Stock: 76210156612-1300LF Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Molex 0350230013 are qualified based on strict equivalence across the following critical parameters:

• Number of Positions: 13 positions (exact match required)
• Pitch: 0.079" (2.00mm) (exact match required)
• Connector Type: Board-In (exact match required)
• Contact Type: Male Pin (exact match required)
• Mounting Type: Through Hole, Right Angle (exact match required)
• Contact Termination: Crimp (exact match required)
• Insulation Material: Polyamide (PA66), Nylon 6/6 (exact match required)
• Operating Temperature Range: -40°C to 105°C (exact match required)
• RoHS Compliance: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

The Amphenol ICC (FCI) part 10156612-1300LF meets all these criteria and qualifies as a parametric equivalent substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the Molex 0350230013 and Amphenol ICC 10156612-1300LF are active production parts with identical electrical and mechanical specifications. Both maintain ROHS3 compliance and carry MSL 1 (Unlimited) moisture sensitivity ratings, indicating no special handling requirements during storage or assembly. Selection between these parts may be based on availability, packaging format (Molex supplied in Bulk; Amphenol ICC supplied in Bag), or supply chain considerations, as functional performance is equivalent across all specified parameters.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol ICC 10156612-1300LF be used as a direct replacement for the Molex 0350230013?

A: Yes. Both parts share identical electrical and mechanical parameters, including 13 positions, 2.00mm pitch, board-in connector type, male pin contacts, through-hole right-angle mounting, crimp termination, and operating temperature range of -40°C to 105°C.

Q: Are there any differences in compliance or certifications between these parts?

A: No. Both parts are ROHS3 compliant and carry identical moisture sensitivity levels (MSL 1, Unlimited). Both are active production parts with no known end-of-life status.

Q: What is the difference between Bulk and Bag packaging?

A: Bulk packaging typically indicates loose components in larger quantities, while Bag packaging indicates components packaged in smaller quantities per bag. This is a logistics consideration and does not affect electrical or mechanical performance.

Q: Do these connectors include contacts?

A: No. Both the Molex 0350230013 and Amphenol ICC 10156612-1300LF are housings only. Contacts must be sourced separately and crimped into the housing.

Q: What mounting orientation do these connectors support?

A: Both connectors are designed for through-hole, right-angle mounting, suitable for perpendicular board-to-board or board-to-cable connections.