Molex 0350220015 Equivalent & Substitute Parts

Part Overview

The Molex 0350220015 is a 15-position board-in rectangular connector housing with 2.50mm pitch, designed for through-hole, right-angle mounting applications. This connector operates across the industrial temperature range of -40°C to 105°C and is ROHS3 compliant. The part is currently active in production with substantial inventory availability. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in applications where form factor and performance requirements remain constant.

Substiute Parts

0350220015

MolexIn Stock: 148710350220015 Datasheet

Current PartRFQ

10156616-1500LF

Amphenol ICC (FCI)In Stock: 112710156616-1500LF Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0350220015 is determined by strict alignment of the following critical parameters:

• Connector Type: Board-In housing configuration
• Position Count: 15 positions
• Pitch Specification: 0.098" (2.50mm) center-to-center spacing
• Row Configuration: Single row layout
• Mounting Geometry: Through-hole, right-angle orientation
• Contact Interface: Male pin, crimp termination
• Material Composition: Polyamide (PA66) insulation
• Environmental Rating: -40°C to 105°C operating range
• Regulatory Compliance: ROHS3 Compliant

The Amphenol ICC (FCI) part 10156616-1500LF meets all specified parameters and qualifies as a parametric equivalent. Both parts share identical electrical and mechanical characteristics within the defined tolerance envelope.

Parameter Comparison

Engineering Selection Recommendations

Both the Molex 0350220015 and Amphenol ICC 10156616-1500LF are active production parts with full ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on:

• Supply Chain Availability: Molex 0350220015 maintains 14,782 units in stock; Amphenol ICC 10156616-1500LF maintains 1,029 units in stock
• Packaging Format: Molex ships in bulk packaging; Amphenol ICC ships in bag packaging
• Series Designation: Molex Series 35022; Amphenol ICC Minitek® Board-In 2.5mm series
• Regulatory Status: Both parts carry identical compliance certifications (ROHS3, REACH unaffected, EAR99, HTSUS 8538.90.6000)

Both parts are suitable for direct substitution in applications requiring 15-position, 2.50mm pitch board-in connectors with through-hole, right-angle mounting.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol ICC 10156616-1500LF directly replace the Molex 0350220015 in existing designs?

A: Yes. Both parts share identical electrical and mechanical parameters across all critical specifications: 15 positions, 2.50mm pitch, through-hole right-angle mounting, male pin crimp termination, and -40°C to 105°C operating range. No design modification is required.

Q: Are there differences in packaging that affect component handling?

A: The Molex 0350220015 is supplied in bulk packaging, while the Amphenol ICC 10156616-1500LF is supplied in bag packaging. This affects storage and pick-and-place automation considerations but does not impact electrical or mechanical performance.

Q: Do both parts require the same contact specifications?

A: Yes. Both housings are designed for crimp-terminated male pin contacts compatible with 2.50mm pitch contact systems. Contact selection remains independent of housing manufacturer.

Q: What is the significance of the MSL 1 rating?

A: MSL 1 (Unlimited) indicates both parts have unlimited shelf life under standard storage conditions and require no special moisture control measures during handling or storage.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical regulatory certifications: ROHS3 compliant, REACH unaffected, EAR99 export classification, and HTSUS code 8538.90.6000.