Molex 0350220013 Equivalent & Substitute Parts

Part Overview

The Molex 0350220013 is a 13-position board-in rectangular connector housing with 0.098" (2.50mm) pitch, designed for through-hole, right-angle mounting applications. This connector operates as a male pin interface and requires separate crimp contacts for assembly. The part is Active in product status and fully compliant with RoHS3 standards. Substitute parts are identified when equivalent electrical and mechanical parameters are required for design flexibility, inventory management, or supply chain continuity.

Substiute Parts

0350220013

MolexIn Stock: 10250350220013 Datasheet

Current PartRFQ

10156616-1300LF

Amphenol ICC (FCI)In Stock: 87610156616-1300LF Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0350220013 is determined by strict equivalence across the following parameters:

• Connector Type: Must be Board-In
• Number of Positions: Must be 13
• Pitch: Must be 0.098" (2.50mm)
• Contact Type: Must be Male Pin
• Mounting Type: Must be Through Hole, Right Angle
• Contact Termination: Must be Crimp
• Number of Rows: Must be 1
• RoHS Compliance: Must be ROHS3 Compliant
• MSL Rating: Must be 1 (Unlimited)

The Amphenol ICC (FCI) part 10156616-1300LF meets all these criteria and is classified as a parametric equivalent. Variations in series designation, insulation material specifications, or operating temperature ranges do not affect substitution eligibility when all core electrical and mechanical parameters align.

Parameter Comparison

Engineering Selection Recommendations

Both the Molex 0350220013 and Amphenol ICC 10156616-1300LF are Active products with full ROHS3 compliance and unlimited moisture sensitivity ratings. Selection between these parts should be based on availability, lead time, packaging format (Bulk vs. Bag), or established supplier relationships. Both parts require separate crimp contacts and are suitable for identical board-in applications with 13-position, 2.50mm pitch requirements.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol ICC 10156616-1300LF be used as a direct replacement for the Molex 0350220013?

A: Yes. Both parts share identical electrical and mechanical specifications: 13 positions, 0.098" (2.50mm) pitch, male pin contact type, through-hole right-angle mounting, and crimp termination. Both are ROHS3 compliant with MSL 1 ratings.

Q: What is the difference between the Bulk and Bag packaging options?

A: Packaging format does not affect electrical or mechanical compatibility. Bulk packaging (Molex) and Bag packaging (Amphenol ICC) are distribution formats only. Select based on inventory management and order quantity requirements.

Q: Are contacts included with these connector housings?

A: No. Both the Molex 0350220013 and Amphenol ICC 10156616-1300LF are housings only. Crimp contacts must be sourced separately and matched to the 2.50mm pitch specification.

Q: Do operating temperature specifications affect substitution eligibility?

A: Operating temperature is not a substitution-limiting parameter for these parts. The Amphenol ICC part specifies -40°C ~ 105°C operation. If your application requires temperature performance verification, consult the detailed datasheets; however, this does not prevent substitution based on the provided parameters.

Q: What certifications apply to both parts?

A: Both parts are ROHS3 compliant, carry MSL 1 (Unlimited) ratings, and are classified under ECCN EAR99 with HTSUS code 8538.90.6000.