Molex 0334823632 Rectangular Connector Plug Housing - Equivalent & Substitute Parts

Part Overview

The Molex 0334823632 is a 6-position rectangular connector plug housing with 4.60mm pitch, designed for crimp termination in free-hanging inline applications. This connector housing is part of the MX150 33482 series and features sealed construction with gray polyamide nylon glass-filled insulation. The part is currently active in production with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same connector series, ensuring direct interchangeability in applications requiring identical form factor, pitch, position count, and termination method.

Substiute Parts

0334823632

MolexIn Stock: 20740334823632 Datasheet

Current PartRFQ

0334823601

MolexIn Stock: 64340334823601 Datasheet

Parametric EquivalentRFQ

0334823602

MolexIn Stock: 78720334823602 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Molex 0334823632 are identified based on strict equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following key parameters that must remain identical:

• Connector Type: Plug housing
• Contact Type: Male Blade
• Number of Positions: 6
• Pitch: 0.138" (4.60mm)
• Number of Rows: 2
• Mounting Type: Free Hanging (In-Line)
• Contact Termination: Crimp
• Fastening Type: Locking Ramp
• Series: MX150 33482
• Insulation Material: Polyamide (PA), Nylon, Glass Filled; Syndiotatic Polystyrene (SPS)
• Features: Sealed
• Color: Gray

The substitute parts 0334823601 and 0334823602 maintain identical specifications across all these parameters, confirming direct interchangeability within the MX150 33482 series.

Parameter Comparison

Engineering Selection Recommendations

All three parts—0334823632, 0334823601, and 0334823602—are active production components manufactured by Molex within the MX150 33482 series. Each part maintains ROHS3 compliance and MSL 1 rating, confirming suitability for applications requiring environmental and regulatory adherence. The substitute parts 0334823601 and 0334823602 provide documented operating temperature ranges of -40°C to 150°C and REACH Unaffected status, offering additional compliance documentation. Selection between these parts should be based on availability and supply chain requirements, as all three are electrically and mechanically equivalent for direct substitution in connector assemblies requiring 6-position, 4.60mm pitch plug housings with crimp termination.

Frequently Asked Questions (FAQ)

Q: Can 0334823601 and 0334823602 be used as direct replacements for 0334823632?

A: Yes. All three parts are equivalent across all critical electrical and mechanical parameters within the MX150 33482 series, including connector type, position count, pitch, termination method, and fastening mechanism. Direct substitution is supported.

Q: What determines compatibility between these substitute parts?

A: Compatibility is determined by matching specifications in connector type (plug), contact type (male blade), number of positions (6), pitch (4.60mm), row configuration (2 rows), mounting type (free hanging in-line), termination method (crimp), fastening type (locking ramp), and insulation material composition. All three parts maintain identical specifications in these parameters.

Q: Are there any compliance differences between the main part and substitutes?

A: All three parts are ROHS3 compliant with MSL 1 rating. The substitute parts 0334823601 and 0334823602 include documented operating temperature specifications (-40°C to 150°C) and REACH Unaffected status, which are not specified for the main part 0334823632. These additional specifications do not affect interchangeability.

Q: What is the packaging format for these parts?

A: All three parts are supplied in bulk packaging format.

Q: Are contacts included with these connector housings?

A: No. All three parts are connector housings only. Contacts must be sourced separately and crimped into the housing according to Molex specifications.