Littelfuse 0301006.M Equivalent & Substitute Parts

Part Overview

The Littelfuse 0301006.M is a 6 A, 32 V AC/DC glass cartridge fuse in the 1AG form factor (1/4" x 5/8"). This component is classified as obsolete, making identification of active equivalent and substitute parts essential for ongoing system maintenance and new designs. The part requires a compatible fuse holder for installation and operates within standard industrial and commercial applications requiring low-voltage circuit protection.

Substiute Parts

0301006.M
Littelfuse Inc.In Stock: 6920301006.M Datasheet
0301006.M
Current Part
0AGA006.V
Littelfuse Inc.In Stock: 9920AGA006.V Datasheet
0AGA006.V
Parametric Equivalent
BK/AGA-6
Eaton - Electronics DivisionIn Stock: 1184BK/AGA-6 Datasheet
BK/AGA-6
MFR Recommended

Key Parameters

Parameter Value
Manufacturer Part Number 0301006.M
Manufacturer Littelfuse Inc.
Series AGA
Fuse Type Cartridge, Glass
Current Rating 6 A
Voltage Rating - AC 32 V
Voltage Rating - DC 32 V
Package / Case 1AG, 1/4" x 5/8"
Size / Dimension 0.250" Dia x 0.625" L (6.35mm x 15.88mm)
Mounting Type Requires Holder
Product Status Obsolete
RoHS Status RoHS non-compliant

Substitute Part Grouping Explanation

Substitution for the 0301006.M is determined by the following critical parameters:

  • Current Rating: 6 A (exact match required)
  • Voltage Rating: 32 V AC and 32 V DC (minimum threshold for safe operation)
  • Package / Case: 1AG, 1/4" x 5/8" (physical and electrical compatibility with existing holders)
  • Fuse Type: Cartridge, Glass (form factor and construction type)

The 0301006.M is grouped with two substitute parts: the Littelfuse 0AGA006.V (parametric equivalent) and the Eaton BK/AGA-6 (manufacturer-recommended substitute). Both maintain the 6 A current rating and 1AG package specification. The Littelfuse 0AGA006.V is an active-status direct equivalent with identical voltage ratings. The Eaton BK/AGA-6 operates at higher voltage ratings (125 V AC) while maintaining the same current and package specifications, making it suitable for applications where the original 32 V rating is not a limiting constraint.

Parameter Comparison

Parameter 0301006.M (Main Part) 0AGA006.V (Littelfuse) BK/AGA-6 (Eaton)
Manufacturer Littelfuse Inc. Littelfuse Inc. Eaton - Electronics Division
Series AGA AGA AGA
Fuse Type Cartridge, Glass Cartridge, Glass Cartridge, Glass
Current Rating (Amps) 6 A 6 A 6 A
Voltage Rating - AC 32 V 32 V 125 V
Voltage Rating - DC 32 V 32 V Not specified
Package / Case 1AG, 1/4" x 5/8" 1AG, 1/4" x 5/8" 1AG, 1/4" x 5/8"
Size / Dimension 0.250" Dia x 0.625" L (6.35mm x 15.88mm) 0.250" Dia x 0.625" L (6.35mm x 15.88mm) 0.250" Dia x 0.625" L (6.35mm x 15.88mm)
Mounting Type Requires Holder Requires Holder Requires Holder
Product Status Obsolete Active Active
RoHS Status RoHS non-compliant RoHS non-compliant RoHS non-compliant

Engineering Selection Recommendations

For applications currently using the obsolete 0301006.M, the Littelfuse 0AGA006.V is the primary equivalent choice. This part maintains identical electrical specifications (6 A, 32 V AC/DC) and physical dimensions while offering active product status and improved availability (956 units in stock versus 626 for the original part).

The Eaton BK/AGA-6 serves as an alternative where circuit voltage ratings exceed 32 V AC. This part is rated for 125 V AC operation and includes a specified breaking capacity of 1 kA at rated voltage, providing additional performance data. The BK/AGA-6 is suitable for higher-voltage applications while maintaining the same 6 A current protection and 1AG form factor. Both substitute parts are RoHS non-compliant, consistent with the original component.

Frequently Asked Questions (FAQ)

Q: Can the 0AGA006.V directly replace the 0301006.M?

A: Yes. The 0AGA006.V is a parametric equivalent with identical current rating (6 A), voltage ratings (32 V AC/DC), and package specification (1AG, 1/4" x 5/8"). Both parts require the same holder type and are mechanically and electrically interchangeable.

Q: When should the Eaton BK/AGA-6 be used instead of the Littelfuse 0AGA006.V?

A: The BK/AGA-6 is appropriate for circuits operating at voltages above 32 V AC, up to its rated 125 V AC. If your application operates at or below 32 V AC/DC, either part is suitable. The BK/AGA-6 provides additional voltage margin and specified breaking capacity (1 kA).

Q: Are all three parts physically compatible with the same fuse holder?

A: Yes. All three parts conform to the 1AG package specification with dimensions of 0.250" diameter x 0.625" length (6.35mm x 15.88mm). They are mechanically interchangeable in any holder designed for 1AG cartridge fuses.

Q: What is the significance of the "Requires Holder" mounting type?

A: This indicates that the fuse is a cartridge type and must be installed in a compatible fuse holder. The holder provides electrical contact and mechanical retention. Ensure your existing holder is rated for 1AG cartridges before installation.

Q: Are there RoHS-compliant alternatives available?

A: The provided substitute parts are all RoHS non-compliant, consistent with the original 0301006.M. No RoHS-compliant alternatives are listed in the available data.

Request Quote (Ships tomorrow)