LINE FILTER 02DRCW5 Equivalent & Substitute Parts

Part Overview

The Delta Electronics 02DRCW5 is a single-phase EMC/EMI line filter rated for 115V/250VAC at 2A, designed for general-purpose applications requiring electromagnetic compatibility filtering. This chassis-mount filter features two-stage configuration with wire lead termination and operates across 50/60Hz frequencies. The part maintains active product status with full RoHS3 compliance and regulatory approvals from CSA, UR, and VDE. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained within the specified parameter ranges.

Substiute Parts

02DRCW5

Delta ElectronicsIn Stock: 119902DRCW5 Datasheet

Current PartRFQ

6609031-4

TE Connectivity Corcom FiltersIn Stock: 8216609031-4 Datasheet

SimilarRFQ

FN2060-3-07

Schaffner EMC Inc.In Stock: 1341FN2060-3-07 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 02DRCW5 are qualified based on the following critical parameters:

• Filter Type & Configuration: Single-phase, two-stage topology
• Voltage Rating: Minimum 250VAC capability (02DRCW5 supports both 115V and 250V)
• Current Rating: Equal or greater than 2A
• Mounting & Termination: Chassis mount with wire lead connections
• Frequency Range: Compatibility with 50/60Hz operation
• Regulatory Compliance: CSA, UR, VDE certifications maintained
• RoHS Status: ROHS3 compliance required

The identified substitutes meet these core electrical and mechanical requirements, enabling direct replacement in applications where the 02DRCW5 is specified.

Parameter Comparison

Engineering Selection Recommendations

6609031-4 (TE Connectivity Corcom Filters): This substitute maintains identical current rating (2A) and voltage capability (250VAC) with matching two-stage configuration and wire lead termination. RoHS3 compliance and CSA/UR/VDE certifications align with the original specification. The reduced inductance value (1.078mH versus 2.4mH) represents a measurable difference in filtering characteristics. Operating temperature range (-10°C ~ 40°C) is narrower than the original part. Selection is appropriate for applications operating within the specified temperature envelope.

FN2060-3-07 (Schaffner EMC Inc.): This substitute provides higher current capacity (3A versus 2A) and extended frequency range (DC ~ 400Hz versus 50/60Hz), offering broader operational flexibility. Inductance specification (2.5mH) closely matches the original 2.4mH value. Operating temperature range (-25°C ~ 100°C) matches the original specification. RoHS3 compliance is maintained with expanded regulatory approvals (CE, ENEC added to CSA, UR). Selection is appropriate for applications requiring enhanced current headroom or extended frequency operation.

Frequently Asked Questions (FAQ)

Q: Can the 6609031-4 directly replace the 02DRCW5 in all applications?

A: The 6609031-4 maintains equivalent current rating (2A) and voltage capability (250VAC) with identical mounting and termination. However, the operating temperature range is restricted to -10°C ~ 40°C compared to the original -25°C ~ 100°C specification. Verify application temperature requirements before selection.

Q: What is the significance of the inductance difference between substitutes?

A: Inductance directly affects filtering performance and impedance characteristics. The 02DRCW5 and FN2060-3-07 specify 2.4mH and 2.5mH respectively, providing similar filtering behavior. The 6609031-4 at 1.078mH represents reduced inductive filtering. Selection depends on specific EMI/EMC performance requirements of the application.

Q: Is the FN2060-3-07 suitable for 115VAC applications?

A: The FN2060-3-07 is rated for 250VAC only. The original 02DRCW5 supports both 115V and 250V operation. For applications requiring 115VAC operation, the FN2060-3-07 is not suitable; the 6609031-4 is also limited to 250VAC. Verify voltage requirements before substitution.

Q: Do all substitutes maintain the same regulatory certifications?

A: All three parts maintain RoHS3 compliance and CSA/UR/VDE certifications. The FN2060-3-07 includes additional approvals (CE, ENEC). For applications requiring specific certification compliance, verify that the selected substitute meets all regulatory requirements.

Q: What packaging differences exist between these parts?

A: The 02DRCW5 and 6609031-4 are supplied in Bulk packaging. The FN2060-3-07 is supplied in Tray packaging. Verify packaging compatibility with receiving and assembly processes.