Littelfuse 0216010.VXP Ceramic Fuse 10A 250VAC 5x20mm Equivalent & Substitute Parts

Part Overview

The Littelfuse 0216010.VXP is a fast-blow ceramic cartridge fuse rated for 10A at 250VAC, housed in a 5mm x 20mm form factor. This component is active in production and widely used in AC/DC circuit protection applications requiring reliable overcurrent protection. Substitute parts are necessary to address supply chain availability, regional certification requirements, or inventory optimization while maintaining identical electrical and mechanical performance specifications.

Key Parameters

Parameter	Value
Current Rating	10 A
Voltage Rating (AC)	250 V
Fuse Type	Cartridge, Ceramic
Response Time	Fast Blow
Package / Case	5mm x 20mm
Breaking Capacity @ Rated Voltage	1.5kA
Operating Temperature Range	-55°C ~ 125°C
Mounting Type	Requires Holder

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters:

Current Rating: Must be 10A
Voltage Rating (AC): Must be 250V minimum
Fuse Type: Must be Cartridge, Ceramic
Response Time: Must be Fast Blow
Package / Case: Must be 5mm x 20mm
Breaking Capacity: Must be 1.5kA or greater
Operating Temperature Range: Must support -55°C ~ 125°C

All listed substitute parts meet these criteria and are therefore direct functional equivalents suitable for replacement in applications originally specified for the 0216010.VXP.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Current Rating (A)	Voltage Rating (AC)	Fuse Type	Response Time	Package / Case	Breaking Capacity @ Rated Voltage	Operating Temperature	Product Status
0216010.VXP	Littelfuse Inc.	10	250V	Cartridge, Ceramic	Fast Blow	5mm x 20mm	1.5kA	-55°C ~ 125°C	Active
0216010.HXP	Littelfuse	10	250V	Cartridge, Ceramic	Fast Blow	5mm x 20mm	1.5kA	-55°C ~ 125°C	Active
0001.1014	SCHURTER Inc.	10	250V	Cartridge, Ceramic	Fast Blow	5mm x 20mm	1.5kA	-55°C ~ 125°C	Active
FCC-10A	OptiFuse	10	250V	Cartridge, Ceramic	Fast Blow	5mm x 20mm	200A	-55°C ~ 125°C	Active
FCD-10A	OptiFuse	10	250V	Cartridge, Ceramic	Fast Blow	5mm x 20mm	1.5kA	-55°C ~ 125°C	Active
VUC UBM 10A 250V (PF)	Conquer	10	250V	Cartridge, Ceramic	Fast Blow	5mm x 20mm	1.5kA	-55°C ~ 125°C	Active

Engineering Selection Recommendations

All substitute parts listed are active production components with equivalent electrical and mechanical specifications. Selection among these alternatives should be based on:

Certification Requirements: The 0216010.VXP carries CCC, CE, CSA, KC, PSE, SEMKO, UL, and VDE approvals. The 0001.1014 (SCHURTER) carries cURus, KC, PSE/JET, and VDE approvals. The FCC-10A (OptiFuse) carries cULus and UL 248 approvals. The FCD-10A (OptiFuse) carries cURus and IEC 60127 approvals. The VUC UBM 10A 250V (PF) (Conquer) carries CCC, CSA, UL, and VDE approvals. Verify that the selected substitute meets all required certifications for your application's geographic and regulatory scope.
Inventory Availability: Current stock levels vary by part number and should be confirmed with your supplier.
RoHS Compliance: All parts are ROHS3 compliant.
DC Voltage Rating: The FCD-10A includes explicit 250V DC rating, while other parts are specified for AC/DC operation. Applications requiring DC operation should confirm compatibility with the selected substitute.

Frequently Asked Questions (FAQ)

Q: Can I use any of these substitute parts interchangeably with the 0216010.VXP?

A: Yes. All listed parts meet the critical substitution parameters: 10A current rating, 250V AC voltage rating, fast-blow ceramic cartridge type, 5mm x 20mm package, and -55°C to 125°C operating temperature range. Physical fit and electrical performance are equivalent.

Q: What is the difference between the 0216010.VXP and 0216010.HXP?

A: Both are Littelfuse ceramic cartridge fuses with identical electrical and mechanical specifications. The difference lies in packaging or internal construction variants within the same product line. Both are active production parts.

Q: Does the FCD-10A offer any advantage over the 0216010.VXP?

A: The FCD-10A explicitly specifies 250V DC rating in addition to 250V AC, whereas the 0216010.VXP is specified for AC/DC operation. If your application requires confirmed DC voltage protection, the FCD-10A provides explicit certification for this parameter. The FCD-10A also has a higher melting I²t value (204.7 vs 154.34), indicating different thermal response characteristics.

Q: Are there any certification differences I should consider?

A: Yes. Each manufacturer carries different approval agencies. The 0216010.VXP includes SEMKO approval, while the SCHURTER 0001.1014 includes PSE/JET approval. Verify that your selected substitute carries all certifications required by your application's regulatory jurisdiction.

Q: What does "Requires Holder" mean for mounting type?

A: All listed parts are cartridge fuses that require a separate fuse holder for installation. They are not panel-mount or surface-mount components. Ensure your circuit design includes an appropriate 5mm x 20mm fuse holder.

Q: Can I use the FCC-10A if my circuit requires 1.5kA breaking capacity?

A: The FCC-10A specifies 200A breaking capacity, which is lower than the 1.5kA specified for the 0216010.VXP and most other substitutes. If your application requires 1.5kA breaking capacity, select from the 0216010.HXP, 0001.1014, FCD-10A, or VUC UBM 10A 250V (PF).

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message