Littelfuse 0216008.VXP Ceramic Fuse 8A 250VAC 5x20mm - Equivalent & Substitute Parts

Part Overview

The Littelfuse 0216008.VXP is an 8A 250VAC ceramic cartridge fuse in 5x20mm form factor, designed for fast-blow protection in AC/DC circuits. This component is active in production and widely used in industrial and consumer electronics requiring reliable overcurrent protection. Substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility permits equivalent alternatives meeting identical electrical and mechanical specifications.

Substiute Parts

0216008.VXP

Littelfuse Inc.In Stock: 10320216008.VXP Datasheet

Current PartRFQ

0216008.MXP

Littelfuse Inc.In Stock: 24120216008.MXP Datasheet

Parametric EquivalentRFQ

0001.1013

SCHURTER Inc.In Stock: 43750001.1013 Datasheet

DirectRFQ

FCD-8A

OptiFuseIn Stock: 5180FCD-8A Datasheet

Parametric EquivalentRFQ

VUC UBM 8A 250V (PF)

ConquerIn Stock: 2080VUC UBM 8A 250V (PF) Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters:

• Current Rating: 8 A (exact match required)
• Voltage Rating (AC): 250 V (exact match required)
• Package / Case: 5mm x 20mm (exact match required)
• Fuse Type: Cartridge, Ceramic (exact match required)
• Response Time: Fast Blow (exact match required)
• Breaking Capacity @ Rated Voltage: 1.5kA (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)
• Mounting Type: Requires Holder (exact match required)

All identified substitute parts meet these criteria. Variations in secondary parameters such as Melting I²t, DC Cold Resistance, and specific approval agencies do not disqualify substitution when primary electrical and mechanical specifications align.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are active products with ROHS3 compliance and are suitable for direct replacement in applications requiring 8A 250VAC ceramic cartridge fuses in 5x20mm form factor.

0216008.MXP (Littelfuse): Parametric equivalent from the same manufacturer and series. Identical electrical specifications and certifications. Recommended for applications requiring continuity within the Littelfuse 216 series.

0001.1013 (SCHURTER): Direct manufacturer alternative from SCHURTER Inc., SP 5x20 series. Meets all primary electrical and mechanical requirements. Certifications include cURus, KC, PSE/JET, and VDE. Melting I²t of 81.9 represents a secondary parameter variation.

FCD-8A (OptiFuse): Parametric equivalent from OptiFuse FCD series. Includes explicit 250V DC rating in addition to 250V AC. IEC 60127 certification. Melting I²t of 102.2 represents a secondary parameter variation.

VUC UBM 8A 250V (PF) (Conquer): Parametric equivalent from Conquer UBM series. Certifications include CCC, CSA, PSE, UL, and VDE. DC Cold Resistance of 0.0106 Ohms is lower than the main part. Melting I²t of 91.5381 represents a secondary parameter variation.

Frequently Asked Questions (FAQ)

Q: Can I use any of these substitute parts interchangeably with the Littelfuse 0216008.VXP?

A: Yes. All substitute parts meet identical specifications for current rating (8A), voltage rating (250VAC), fuse type (ceramic cartridge), response time (fast blow), package dimensions (5x20mm), breaking capacity (1.5kA), and operating temperature range (-55°C to 125°C). Physical and electrical compatibility is assured.

Q: What is the difference between the Littelfuse 0216008.VXP and 0216008.MXP?

A: Both are Littelfuse 216 series ceramic cartridge fuses with identical electrical specifications, certifications, and performance characteristics. The primary difference is packaging designation (VXP vs. MXP). They are functionally equivalent.

Q: Why do the substitute parts have different Melting I²t values?

A: Melting I²t is a secondary thermal characteristic that varies between manufacturers due to differences in ceramic composition and construction. All parts meet the 1.5kA breaking capacity requirement at rated voltage. Variations in Melting I²t do not affect substitution eligibility when primary electrical parameters are identical.

Q: Does the FCD-8A have a DC voltage rating while the main part does not?

A: The FCD-8A is rated for 250V DC in addition to 250V AC. This represents an additional capability rather than a limitation. The part remains fully compatible for AC applications.

Q: What certifications should I verify for my specific application?

A: Certification requirements depend on end-use application and regional standards. The main part (0216008.VXP) carries CE, CSA, KC, PSE, SEMKO, TUV, and UR approvals. Substitute parts carry varying certification sets: SCHURTER includes cURus, KC, PSE/JET, VDE; OptiFuse references IEC 60127; Conquer includes CCC, CSA, PSE, UL, VDE. Confirm that your substitute choice includes certifications required by your application and region.

Q: Are all substitute parts currently in stock?

A: Inventory status at time of reference: 0216008.MXP (2382 pcs), 0001.1013 (4319 pcs), FCD-8A (5147 pcs), VUC UBM 8A 250V (PF) (2053 pcs). Verify current availability with your supplier.