Equivalent & Substitute Parts for Littelfuse 0216005.MXE Ceramic Fuse

Part Overview

The Littelfuse 0216005.MXE is a 5A 250VAC ceramic cartridge fuse with a 5mm x 20mm axial form factor, designed for through-hole mounting applications. This part is classified as obsolete, making identification of equivalent and substitute components essential for ongoing system support and procurement planning. The fast-blow response characteristic and 1.5kA breaking capacity establish the baseline performance requirements for acceptable substitutes.

Substiute Parts

0216005.MXE

Littelfuse Inc.In Stock: 10010216005.MXE Datasheet

Current PartRFQ

0216005.MXEP

Littelfuse Inc.In Stock: 651420216005.MXEP Datasheet

Parametric EquivalentRFQ

0001.1011.PT

SCHURTER Inc.In Stock: 35200001.1011.PT Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for ceramic cartridge fuses is determined by strict equivalence across electrical and mechanical parameters. The following criteria establish valid substitutes for the 0216005.MXE:

Critical Parameters for Substitution:

• Current Rating: 5 A (exact match required)
• Voltage Rating (AC): 250 V (exact match required)
• Fuse Type: Cartridge, Ceramic (exact match required)
• Response Time: Fast Blow (exact match required)
• Package / Case: 5mm x 20mm (Axial) (exact match required)
• Mounting Type: Through Hole (exact match required)
• Breaking Capacity @ Rated Voltage: 1.5kA (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)

Two parts meet these substitution criteria and are listed as direct equivalents to the 0216005.MXE.

Parameter Comparison

Engineering Selection Recommendations

Littelfuse 0216005.MXEP is the primary substitute for the obsolete 0216005.MXE. Both parts are manufactured by Littelfuse Inc. and share identical electrical and mechanical specifications. The 0216005.MXEP is currently in active production status with significantly higher inventory availability (65,100 pcs vs. 971 pcs). The 0216005.MXEP achieves ROHS3 compliance, whereas the original part is non-compliant. Approval certifications are identical across both Littelfuse variants.

SCHURTER 0001.1011.PT is an alternative substitute manufactured by SCHURTER Inc. This part meets all critical electrical and mechanical parameters. The melting I²t value (30.8) differs from the Littelfuse variants (27.46), indicating a slightly different thermal response profile within the fast-blow classification. SCHURTER certification is limited to cURus, whereas Littelfuse parts carry broader international approvals. The 0001.1011.PT is ROHS3 compliant and maintains active production status with 3,486 pcs in inventory.

Selection between the two substitutes depends on approval agency requirements for the end application. Applications requiring BSI, CCC, CE, CSA, KC, PSE, SEMKO, UR, or VDE certification must use the Littelfuse 0216005.MXEP. Applications requiring only cURus certification may use either substitute.

Frequently Asked Questions (FAQ)

Q: Can the 0216005.MXEP be used as a direct replacement for the 0216005.MXE?

A: Yes. Both parts are manufactured by Littelfuse Inc. and share identical current rating (5A), voltage rating (250VAC), fuse type (ceramic cartridge), response time (fast blow), package dimensions (5mm x 20mm axial), mounting type (through hole), breaking capacity (1.5kA), and operating temperature range (-55°C to 125°C). The primary difference is product status: the 0216005.MXE is obsolete while the 0216005.MXEP is active production.

Q: What is the difference between the Littelfuse and SCHURTER substitutes?

A: Both meet the core electrical and mechanical requirements. The SCHURTER 0001.1011.PT has a melting I²t of 30.8 compared to 27.46 for Littelfuse parts, indicating a slightly different thermal response within the fast-blow category. Certification scope differs: Littelfuse covers BSI, CCC, CE, CSA, KC, PSE, SEMKO, UR, and VDE; SCHURTER covers cURus only.

Q: Are there physical dimension differences between these fuses?

A: The package case specification is 5mm x 20mm (Axial) for all three parts. The 0216005.MXE and 0216005.MXEP have identical dimensions (0.228" Dia x 0.886" L / 5.80mm x 22.50mm). The SCHURTER 0001.1011.PT has a slightly smaller diameter (0.213" Dia x 0.886" L / 5.40mm x 22.50mm) but maintains the same 5mm x 20mm axial form factor and through-hole mounting compatibility.

Q: Which substitute should I select for new designs?

A: For new designs, the Littelfuse 0216005.MXEP is the recommended primary choice due to active production status, higher inventory availability, and broader international certification coverage. The SCHURTER 0001.1011.PT is suitable when cURus certification is sufficient for the application.

Q: What is the impact of the melting I²t difference?

A: The melting I²t value characterizes the thermal energy required to melt the fuse element. The SCHURTER part (30.8) requires slightly more thermal energy than the Littelfuse variants (27.46). Both remain classified as fast-blow fuses and meet the 1.5kA breaking capacity requirement. Application-specific thermal analysis is necessary to determine if this difference affects system protection characteristics.

Q: Are all three parts RoHS compliant?

A: The 0216005.MXE is RoHS non-compliant. Both the 0216005.MXEP and 0001.1011.PT are ROHS3 compliant. Applications subject to RoHS requirements must use either the 0216005.MXEP or 0001.1011.PT.