Request Quote
(Ships tomorrow)
Littelfuse 0215005.MXGP Ceramic Fuse 5A 250VAC 5x20mm - Equivalent & Substitute Parts
Part Overview
The Littelfuse 0215005.MXGP is a 5A 250VAC ceramic cartridge fuse in 5x20mm form factor, classified as a slow-blow fuse requiring a holder for installation. This component is active in production with 725 units currently in stock. Substitute parts are necessary to address supply chain constraints, regional availability differences, or specific application requirements while maintaining electrical and mechanical compatibility.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Current Rating | 5 A |
| Voltage Rating (AC) | 250 V |
| Fuse Type | Cartridge, Ceramic |
| Response Time | Slow Blow |
| Package / Case | 5mm x 20mm |
| Breaking Capacity @ Rated Voltage | 1.5kA |
| Operating Temperature Range | -55°C ~ 125°C |
| Mounting Type | Requires Holder |
| RoHS Status | ROHS3 Compliant |
Substitute Part Grouping Explanation
Substitution eligibility is determined by strict parameter matching across electrical and mechanical specifications. The primary substitution criteria are:
Critical Parameters (Must Match):
- Current Rating: 5 A
- Voltage Rating (AC): 250 V
- Package / Case: 5mm x 20mm
- Fuse Type: Cartridge, Ceramic
- Mounting Type: Requires Holder
Secondary Parameters (Should Match):
- Response Time: Slow Blow
- Operating Temperature Range: -55°C ~ 125°C
- Breaking Capacity @ Rated Voltage: 1.5kA
Substitute parts are grouped into three categories: Littelfuse parametric equivalents (identical specifications), cross-manufacturer direct equivalents (matching all critical parameters), and manufacturer-recommended alternatives (functionally compatible with noted parameter variations).
Parameter Comparison
| Manufacturer Part Number | Manufacturer | Current Rating (A) | Voltage AC (V) | Voltage DC (V) | Response Time | Package | Breaking Capacity (kA) | Melting I²t | Operating Temp (°C) | Inventory (Pcs) |
|---|---|---|---|---|---|---|---|---|---|---|
| 0215005.MXGP | Littelfuse Inc. | 5 | 250 | — | Slow Blow | 5x20mm | 1.5 | 66.095 | -55 ~ 125 | 725 |
| 0215005.HXP | Littelfuse Inc. | 5 | 250 | — | Slow Blow | 5x20mm | 1.5 | 66.095 | -55 ~ 125 | 3215 |
| 0215005.MXP | Littelfuse Inc. | 5 | 250 | — | Slow Blow | 5x20mm | 1.5 | 66.095 | -55 ~ 125 | 43653 |
| 0215005.TXP | Littelfuse Inc. | 5 | 250 | — | Slow Blow | 5x20mm | 1.5 | 66.095 | -55 ~ 125 | 933 |
| 0215005.VXP | Littelfuse Inc. | 5 | 250 | — | Slow Blow | 5x20mm | 1.5 | 66.095 | -55 ~ 125 | 1020 |
| 0001.2511 | SCHURTER Inc. | 5 | 250 | 150 | Slow Blow | 5x20mm | 1.5 | 97.5 | -55 ~ 125 | 6382 |
| 0034.2523 | SCHURTER Inc. | 5 | 250 | 125 | Medium Blow | 5x20mm | 1.0 | 52.5 | -40 ~ 85 | 5265 |
| 0001.2711.11 | SCHURTER Inc. | 5 | 250 | 150 | Slow Blow | 5x20mm | 1.5 | 97.5 | -55 ~ 125 | 10645 |
| 0659C5000-12 | Bel Fuse Inc. | 5 | 250 | — | Slow Blow | 5x20mm | 1.5 | 92.5 | -55 ~ 125 | 2358 |
| TCD-5A | OptiFuse | 5 | 250 | — | Slow Blow | 5x20mm | 1.5 | — | -55 ~ 125 | 4645 |
Engineering Selection Recommendations
Littelfuse Parametric Equivalents (0215005.HXP, 0215005.MXP, 0215005.TXP, 0215005.VXP): These parts are direct parametric equivalents to the 0215005.MXGP with identical electrical and mechanical specifications. All are active products with ROHS3 compliance and full approval agency certifications (CCC, CE, CSA, KC, PSE, SEMKO, UL, VDE). Selection among these variants should be based on inventory availability and regional supply chain requirements. The 0215005.MXP offers the highest inventory level at 43,653 units.
SCHURTER 0001.2511 (Direct Equivalent): This part matches all critical parameters with identical 5A 250VAC rating, 5x20mm package, 1.5kA breaking capacity, and slow-blow response. It provides DC voltage capability (150V) not specified in the main part. Operating temperature range and approval agencies (CCC, cURus, KC, PSE/JET, VDE) are compatible. Inventory availability is 6,382 units.
SCHURTER 0001.2711.11 (Parametric Equivalent): Identical to 0001.2511 with matching electrical and mechanical specifications. Offers 150V DC rating and slow-blow response. Approval agencies include CCC, cURus, and VDE. Highest SCHURTER inventory at 10,645 units.
Bel Fuse 0659C5000-12 (Parametric Equivalent): Matches all critical parameters with 5A 250VAC, 5x20mm package, 1.5kA breaking capacity, and slow-blow response. Provides full operating temperature range (-55°C ~ 125°C) and ROHS3 compliance. Approval agencies include CCC, cURus, PSE, and VDE. Inventory: 2,358 units.
OptiFuse TCD-5A (Parametric Equivalent): Meets all critical parameters with 5A 250VAC, 5x20mm package, 1.5kA breaking capacity, and slow-blow response. Approved to cURus and IEC 60127 standards. ROHS3 compliant. Inventory: 4,645 units.
SCHURTER 0034.2523 (Manufacturer-Recommended Alternative): This part deviates from the primary specification in response time (Medium Blow vs. Slow Blow), breaking capacity (1.0kA vs. 1.5kA), melting I²t (52.5 vs. 66.095), and operating temperature range (-40°C ~ 85°C vs. -55°C ~ 125°C). Use only when application requirements explicitly permit medium-blow response and reduced breaking capacity. Inventory: 5,265 units.
Frequently Asked Questions (FAQ)
Q: Can I use any of these substitute parts interchangeably with the 0215005.MXGP?
A: Littelfuse parametric equivalents (0215005.HXP, 0215005.MXP, 0215005.TXP, 0215005.VXP) are direct substitutes with identical specifications. SCHURTER 0001.2511 and 0001.2711.11, Bel Fuse 0659C5000-12, and OptiFuse TCD-5A are functionally equivalent for applications requiring 5A 250VAC slow-blow ceramic cartridge fuses in 5x20mm packages. The 0034.2523 is not recommended as a direct substitute due to response time and breaking capacity differences.
Q: What is the significance of the DC voltage rating on SCHURTER parts?
A: SCHURTER 0001.2511 and 0001.2711.11 specify DC voltage ratings (150V) in addition to AC ratings. This indicates the fuse can operate in DC circuits up to that voltage. The main part (0215005.MXGP) does not specify a DC rating. If your application uses DC circuits, SCHURTER parts provide explicit DC capability; however, verify your specific circuit requirements before selection.
Q: Why does the 0034.2523 have different response time and breaking capacity?
A: The 0034.2523 is classified as Medium Blow with 1.0kA breaking capacity, compared to the Slow Blow 1.5kA specification of the main part. This part is suitable only for applications where medium-blow response and lower breaking capacity are acceptable. Confirm application requirements before using this alternative.
Q: Are all substitute parts ROHS3 compliant?
A: Yes, all listed substitute parts are ROHS3 compliant. All meet environmental compliance requirements equivalent to the main part.
Q: Which substitute part has the best inventory availability?
A: Littelfuse 0215005.MXP offers the highest inventory at 43,653 units, followed by SCHURTER 0001.2711.11 at 10,645 units. Both are parametric equivalents suitable for direct substitution.
Q: Do all parts use the same holder?
A: All substitute parts maintain the 5x20mm cartridge form factor and require a holder for installation, consistent with the main part. Verify holder compatibility with your specific application design.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts