Littelfuse 0213.200M Glass Cartridge Fuse Equivalent & Substitute Parts

Part Overview

The Littelfuse 0213.200M is a 200 mA, 250 V AC/DC glass cartridge fuse in 5mm x 20mm form factor with slow-blow response characteristics. This part is classified as obsolete. Equivalent and substitute parts are available from the active Littelfuse product lines (Series 213, 218, and 219XA) that maintain identical electrical and mechanical specifications while offering improved product status and compliance certifications.

Key Parameters

Parameter	Value
Current Rating	200 mA
Voltage Rating (AC)	250 V
Fuse Type	Cartridge, Glass
Package / Case	5mm x 20mm
Response Time	Slow Blow
Mounting Type	Requires Holder
Breaking Capacity @ Rated Voltage	35A (Series 213); 35A (Series 218); 150A (Series 219XA)
Operating Temperature Range	-55°C to 125°C
DC Cold Resistance	1.6 Ohms

Substitute Part Grouping Explanation

Substitution is determined by strict equivalence across the following parameters: current rating (200 mA), voltage rating (250 V AC), fuse type (cartridge glass), package dimensions (5mm x 20mm), response time (slow blow), and operating temperature range (-55°C to 125°C). All substitute parts maintain these core electrical and mechanical specifications.

Substitute parts are grouped into three categories based on series designation and breaking capacity:

Series 213 Active Equivalents (35A breaking capacity): 0213.200MXBP, 0213.200MXP, 0213.200TXP

Series 218 Active Equivalents (35A breaking capacity): 0218.200HXP, 0218.200MXBP, 0218.200MXP, 0218.200TXP, 0218.200VXP

Series 219XA Active Equivalents (150A breaking capacity): 0219.200MXABP, 0219.200MXAP

Parameter Comparison

Part Number	Manufacturer	Series	Current Rating	Voltage Rating (AC)	Package	Response Time	Breaking Capacity	Melting I²t	Product Status	RoHS Status
0213.200M	Littelfuse Inc.	213	200 mA	250 V	5mm x 20mm	Slow Blow	35A	0.225	Obsolete	Non-compliant
0213.200MXBP	Littelfuse Inc.	213	200 mA	250 V	5mm x 20mm	Slow Blow	35A	0.225	Active	ROHS3 Compliant
0213.200MXP	Littelfuse Inc.	213	200 mA	250 V	5mm x 20mm	Slow Blow	35A	0.225	Active	ROHS3 Compliant
0213.200TXP	Littelfuse Inc.	213	200 mA	250 V	5mm x 20mm	Slow Blow	35A	0.225	Active	ROHS3 Compliant
0218.200HXP	Littelfuse Inc.	218	200 mA	250 V	5mm x 20mm	Slow Blow	35A	0.341	Active	ROHS3 Compliant
0218.200MXBP	Littelfuse Inc.	218	200 mA	250 V	5mm x 20mm	Slow Blow	35A	0.341	Active	ROHS3 Compliant
0218.200MXP	Littelfuse Inc.	218	200 mA	250 V	5mm x 20mm	Slow Blow	35A	0.341	Active	ROHS3 Compliant
0218.200TXP	Littelfuse Inc.	218	200 mA	250 V	5mm x 20mm	Slow Blow	35A	0.341	Active	ROHS3 Compliant
0218.200VXP	Littelfuse Inc.	218	200 mA	250 V	5mm x 20mm	Slow Blow	35A	0.341	Active	ROHS3 Compliant
0219.200MXABP	Littelfuse Inc.	219XA	200 mA	250 V	5mm x 20mm	Slow Blow	150A	0.32	Active	ROHS3 Compliant
0219.200MXAP	Littelfuse Inc.	219XA	200 mA	250 V	5mm x 20mm	Slow Blow	150A	0.32	Active	ROHS3 Compliant

Engineering Selection Recommendations

The 0213.200M is obsolete and should be replaced with an active equivalent. All substitute parts listed maintain the required 200 mA current rating, 250 V AC voltage rating, 5mm x 20mm package dimensions, and slow-blow response characteristics.

Series 213 Substitutes (0213.200MXBP, 0213.200MXP, 0213.200TXP) provide direct series equivalence with identical melting I²t (0.225) and 35A breaking capacity. These parts are ROHS3 compliant and carry active product status.

Series 218 Substitutes (0218.200HXP, 0218.200MXBP, 0218.200MXP, 0218.200TXP, 0218.200VXP) maintain electrical equivalence with higher melting I²t (0.341) and expanded approval agency certifications including UL and K-MARK. These parts are ROHS3 compliant and carry active product status.

Series 219XA Substitutes (0219.200MXABP, 0219.200MXAP) provide enhanced breaking capacity (150A versus 35A) while maintaining all core electrical specifications. These parts are ROHS3 compliant and carry active product status.

All substitute parts operate across the same temperature range (-55°C to 125°C) and maintain 1.6 Ohms DC cold resistance. Selection between Series 213, 218, and 219XA should be based on application breaking capacity requirements and required approval agency certifications.

Frequently Asked Questions (FAQ)

Q: Can Series 218 parts replace Series 213 parts? A: Yes. Series 218 parts maintain identical current rating (200 mA), voltage rating (250 V AC), package dimensions (5mm x 20mm), and response time (slow blow). The higher melting I²t (0.341 versus 0.225) and expanded certifications make Series 218 parts suitable for applications previously using Series 213.

Q: What is the difference between Series 219XA and Series 213/218? A: Series 219XA parts provide 150A breaking capacity compared to 35A in Series 213 and 218. All other electrical and mechanical parameters remain identical. Selection depends on application fault current requirements.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All listed substitute parts carry ROHS3 compliance status. The original 0213.200M is RoHS non-compliant.

Q: Do packaging options affect substitution? A: Packaging (bulk versus other formats) does not affect electrical or mechanical compatibility. All parts maintain the same 5mm x 20mm cartridge form factor and require a fuse holder for mounting.

Q: Which approval agencies are supported across all substitutes? A: CCC, CE, CSA, SEMKO, and VDE certifications are common across all substitute parts. Series 218 and 219XA parts include additional certifications (UL, K-MARK, KC) not present in the original 0213.200M.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message