TE Connectivity 02114002-000 Inclinometer Sensor Equivalent & Substitute Parts

Part Overview

The TE Connectivity Measurement Specialties 02114002-000 is an AccuStar®-EA series inclinometer motion sensor designed for single-axis inclination measurement. This module operates on the X or Y axis with a measuring range of ±65° and delivers analog voltage output suitable for embedded measurement applications. The product is classified as obsolete, necessitating identification of functionally compatible alternatives for ongoing system support and new design implementations.

Substiute Parts

02114002-000

TE Connectivity Measurement SpecialtiesIn Stock: 119202114002-000 Datasheet

Current PartRFQ

G-NSDOG1-006

TE Connectivity Measurement SpecialtiesIn Stock: 950G-NSDOG1-006 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution analysis for the 02114002-000 is based on the following critical parameters: output type (analog voltage), interface (analog), axis configuration (X or Y), package format (module), and operating temperature range. The substitute part G-NSDOG1-006 shares the core functional characteristics of analog voltage output, X or Y axis capability, and module packaging. However, substitution introduces the following parameter variations:

Measuring Range Expansion: The substitute extends the measuring range from ±65° to ±180°, providing broader angular measurement capability. This expansion is compatible with applications requiring the original ±65° range, as the substitute accommodates all measurements within the original specification.

Voltage Rating Shift: The substitute operates at 8 V ~ 30 V, which overlaps with the original 5 V ~ 15 V range but extends the upper limit. Systems designed for the original 5 V ~ 15 V specification must verify that the substitute's 8 V minimum voltage requirement is compatible with existing power supplies.

Sensitivity and Bandwidth: The substitute part does not provide specified sensitivity or bandwidth values in the available data. Applications dependent on the original ±0.5% sensitivity or 2 Hz bandwidth must conduct direct comparison with manufacturer specifications.

Temperature Range: The substitute supports -40°C ~ 85°C, which encompasses the original -40°C ~ 80°C range with a 5°C extension at the upper limit.

Product Status and Compliance: The substitute is active and RoHS3 compliant, whereas the original is obsolete and not subject to RoHS classification.

Parameter Comparison

Engineering Selection Recommendations

For Obsolete Product Replacement: The 02114002-000 is classified as obsolete. The G-NSDOG1-006 substitute is an active product from the same manufacturer, ensuring continued availability and supply chain stability. This substitution is appropriate for system redesigns, production continuations, and new implementations where the original part is no longer procurable.

For Voltage Supply Compatibility: Applications currently operating the 02114002-000 at 5 V must verify that system power supplies can be adjusted to the G-NSDOG1-006 minimum of 8 V. Existing 5 V-only systems require power supply modification or alternative solutions.

For Measuring Range Requirements: The substitute's ±180° range fully encompasses the original ±65° specification. Applications requiring measurement only within ±65° will function correctly with the substitute. Applications requiring the full ±180° capability gain extended measurement range.

For Compliance and Regulatory Requirements: The G-NSDOG1-006 is RoHS3 compliant, meeting current environmental and regulatory standards. Systems subject to RoHS compliance mandates benefit from this substitution.

For Sensitivity and Bandwidth Verification: Direct comparison of sensitivity and bandwidth specifications between the original and substitute is required for applications where ±0.5% accuracy or 2 Hz bandwidth response are critical performance criteria. Obtain detailed manufacturer datasheets for the G-NSDOG1-006 to confirm these parameters.

Frequently Asked Questions (FAQ)

Q: Can the G-NSDOG1-006 directly replace the 02114002-000 in existing designs?

A: Direct replacement is possible if the system power supply operates at 8 V or higher. Systems designed for 5 V operation require power supply modification. The substitute's extended ±180° measuring range is compatible with applications requiring only ±65° measurement. Sensitivity and bandwidth specifications must be confirmed with the substitute manufacturer's datasheet.

Q: What is the primary reason for substitution?

A: The 02114002-000 is obsolete and no longer in production. The G-NSDOG1-006 is an active product from the same manufacturer, providing continued availability and supply chain support.

Q: Are both parts from the same manufacturer?

A: Yes. Both the 02114002-000 and G-NSDOG1-006 are manufactured by TE Connectivity Measurement Specialties, ensuring consistent design philosophy and support infrastructure.

Q: How do the measuring ranges differ?

A: The original 02114002-000 measures ±65°, while the substitute G-NSDOG1-006 measures ±180°. The substitute's extended range fully contains the original specification, making it suitable for applications requiring the original ±65° range and providing additional capability for broader angular measurement.

Q: What voltage supply changes are required?

A: The original operates at 5 V ~ 15 V, while the substitute requires 8 V ~ 30 V. The minimum voltage increases from 5 V to 8 V. Systems currently operating at 5 V must be modified to supply at least 8 V. The upper voltage limit increases from 15 V to 30 V, providing greater flexibility for higher-voltage applications.

Q: Are there differences in operating temperature ranges?

A: The original operates at -40°C ~ 80°C, while the substitute operates at -40°C ~ 85°C. The substitute's range encompasses the original with a 5°C extension at the upper temperature limit, providing equivalent or improved thermal performance.

Q: What packaging format is used for both parts?

A: Both parts are supplied in module format, maintaining identical form factor and integration approach.

Q: Is the substitute RoHS compliant?

A: Yes. The G-NSDOG1-006 is RoHS3 compliant. The original 02114002-000 has RoHS status listed as not applicable due to its obsolete classification and earlier production date.

Q: What output interface do both parts provide?

A: Both parts provide analog voltage output with analog interface, ensuring signal compatibility with existing measurement and control circuits.

Q: Are axis configurations identical?

A: Yes. Both parts support X or Y axis configuration, providing equivalent single-axis measurement capability.