0201YA160KAT2A Ceramic Capacitor - Equivalent & Substitute Parts

Part Overview

The 0201YA160KAT2A is a 16 pF ceramic capacitor manufactured by KYOCERA AVX, rated at 16V with C0G/NP0 temperature coefficient in 0201 (0603 Metric) surface mount package. This component is designed for general-purpose applications requiring stable capacitance across temperature ranges from -55°C to 125°C. The part is currently active in production with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent and substitute parts are identified to provide design flexibility, inventory alternatives, and voltage rating upgrades when circuit requirements permit.

Substiute Parts

0201YA160KAT2A

KYOCERA AVXIn Stock: 12030201YA160KAT2A Datasheet

Current PartRFQ

GRM0335C1H160JA01D

Murata ElectronicsIn Stock: 72828GRM0335C1H160JA01D Datasheet

DirectRFQ

GRM0335C1E160GA01D

Murata ElectronicsIn Stock: 50567GRM0335C1E160GA01D Datasheet

UpgradeRFQ

GRM0335C1E160JA01D

Murata ElectronicsIn Stock: 25580GRM0335C1E160JA01D Datasheet

UpgradeRFQ

GRM0335C1H160GA01D

Murata ElectronicsIn Stock: 270898GRM0335C1H160GA01D Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence in the following parameters: capacitance value (16 pF), temperature coefficient (C0G/NP0), package type (0201/0603 Metric), physical dimensions, and operating temperature range (-55°C to 125°C). All identified substitutes maintain these core specifications.

Voltage rating substitution is permitted when the substitute part's rated voltage equals or exceeds the original specification. The 0201YA160KAT2A operates at 16V; substitutes rated at 25V or 50V are electrically compatible and provide additional design margin.

Tolerance variation is acceptable within the constraints of the application circuit. The original part specifies ±10% tolerance; substitutes with ±5% or ±2% tolerance provide improved capacitance stability and are direct upgrades.

All substitute parts are manufactured by Murata Electronics (GRM series), maintain identical physical footprints, and comply with ROHS3 and REACH requirements matching the original specification.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain active production status and full ROHS3 compliance, ensuring long-term availability and regulatory alignment with the original 0201YA160KAT2A specification.

GRM0335C1H160JA01D and GRM0335C1H160GA01D provide 50V voltage rating with ±5% and ±2% tolerance respectively, offering increased design margin for circuits operating below 16V nominal stress.

GRM0335C1E160GA01D and GRM0335C1E160JA01D provide 25V voltage rating with ±2% and ±5% tolerance respectively, suitable for applications requiring moderate voltage headroom above the 16V specification.

Tolerance selection depends on circuit sensitivity to capacitance variation. The ±2% tolerance variants (GRM0335C1E160GA01D and GRM0335C1H160GA01D) are appropriate for precision timing, filtering, or impedance-critical applications. The ±5% tolerance variants (GRM0335C1H160JA01D and GRM0335C1E160JA01D) are suitable for general-purpose coupling, decoupling, and non-critical applications.

Frequently Asked Questions (FAQ)

Q: Can GRM0335C1H160GA01D replace 0201YA160KAT2A in all applications?

A: Yes. GRM0335C1H160GA01D is electrically and mechanically compatible. It provides identical 16 pF capacitance, C0G/NP0 temperature coefficient, and -55°C to 125°C operating range. The 50V voltage rating exceeds the 16V requirement, and ±2% tolerance is superior to the original ±10% specification. Physical footprint and package dimensions are identical.

Q: What is the difference between the four Murata substitutes?

A: The substitutes differ in voltage rating and tolerance. GRM0335C1H series parts are rated 50V; GRM0335C1E series parts are rated 25V. Within each voltage series, the "GA" suffix indicates ±2% tolerance, while "JA" suffix indicates ±5% tolerance. All four maintain identical capacitance, temperature coefficient, and physical dimensions.

Q: Are there any compatibility concerns with PCB assembly?

A: No. All substitute parts use identical 0201 (0603 Metric) surface mount package with matching footprint dimensions (0.024" L x 0.012" W, 0.60mm x 0.30mm) and thickness (0.013", 0.33mm). Assembly equipment, solder reflow profiles, and placement tooling require no modification.

Q: Which substitute should I select for cost optimization?

A: GRM0335C1H160JA01D offers the lowest-cost substitute with 50V rating and ±5% tolerance, suitable for non-critical applications. GRM0335C1E160JA01D provides a 25V alternative at lower cost than 50V variants while maintaining ±5% tolerance.

Q: Do all substitutes have the same moisture sensitivity rating?

A: Yes. All substitute parts maintain MSL 1 (Unlimited) rating, identical to the original 0201YA160KAT2A, requiring no changes to storage, handling, or reflow procedures.