Equivalent & Substitute Parts for 01T1002JF

Part Overview

Manufacturer Part Number 01T1002JF is a Vishay Dale NTC Thermistor within the Temperature Sensors category, featuring a bead form factor and free hanging mounting type. The device provides a nominal resistance of 10kΩ at 25°C with a tolerance of ±5%, and is packaged in bulk form. Its part status is Last Time Buy, indicating it will be discontinued and thus sourcing alternative models is necessary for continuity in production and maintenance operations.

Substiute Parts

01T1002JF

Vishay DaleIn Stock: 158901T1002JF Datasheet

Current PartRFQ

NTCLE350E4103JHB0

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1426NTCLE350E4103JHB0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of NTC thermistors is validated strictly based on the following parameters: resistance at 25°C, resistance tolerance, package or case type, mounting method, RoHS compliance, REACH status, and inventory availability. Only parts matching these parameters and falling within the defined category of Temperature Sensors are considered eligible for direct substitution.

Parameter Comparison

Engineering Selection Recommendations

Part 01T1002JF is marked as Last Time Buy, with 1541 pieces available in stock. Substitute part NTCLE350E4103JHB0 is currently active, available in inventory, and maintains identical compliance standards, including ROHS3 and REACH unaffected designations, as well as ECCN and HTSUS codes. Selection is based exclusively on available inventory and compliance certifications as documented.

Frequently Asked Questions (FAQ)

Q1: What defines a valid substitute for NTC Thermistor bead sensors in this product class?
A1: Substitution is determined by identical resistance at 25°C, tolerance range, bead package format, mounting type, and required compliance certifications.

Q2: Are lead wire lengths a required matching parameter for substitution?
A2: Substitution is based strictly on provided parameters; different lead wire lengths are listed for each part.

Q3: Is RoHS and REACH compliance maintained with substitutes?
A3: Both parts are documented as ROHS3 Compliant and REACH Unaffected.

Q4: Can substitutes be selected when the main part is listed as Last Time Buy?
A4: Substitute selection is enabled when the main part is designated Last Time Buy and eligible substitutes meet all key parameters provided.

Q5: Is package type critical in a substitution decision?
A5: Yes; only bead package types with free hanging mounting are listed for both main and substitute parts.