Molex 0190060007 Equivalent & Substitute Parts

Part Overview

The Molex 0190060007 is a 0.187" (4.75mm) Quick Connect Female crimp connector designed for 18-22 AWG wire applications. This fully insulated, angled 90° flag terminal is part of the Avikrimp series and is actively manufactured. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, supply chain considerations, or application-specific packaging needs.

Key Parameters

Parameter	Value
Tab Width	0.187" (4.75mm)
Tab Thickness	0.020" (0.51mm)
Wire Gauge	18-22 AWG
Terminal Type	Angled - 90°, Flag
Gender	Female
Termination	Crimp
Insulation	Fully Insulated
Mounting Type	Free Hanging (In-Line), Right Angle
Contact Material	Brass
Color	Red

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0190060007 is determined by strict equivalence in the following parameters:

Tab Width: 0.187" (4.75mm)
Tab Thickness: 0.020" (0.51mm)
Wire Gauge: 18-22 AWG
Terminal Type: Angled - 90°, Flag
Gender: Female
Termination Method: Crimp
Insulation Type: Fully Insulated
Mounting Configuration: Free Hanging (In-Line), Right Angle
Contact Material: Brass
Color: Red

The TE Connectivity AMP Connectors part number 2-520334-2 meets all critical substitution criteria and is classified as a manufacturer-recommended equivalent.

Parameter Comparison

Parameter	Molex 0190060007	TE Connectivity 2-520334-2	Compatibility
Tab Width	0.187" (4.75mm)	0.187" (4.75mm)	Equivalent
Tab Thickness	0.020" (0.51mm)	0.020" (0.51mm)	Equivalent
Wire Gauge	18-22 AWG	18-22 AWG	Equivalent
Terminal Type	Angled - 90°, Flag	Angled - 90°, Flag	Equivalent
Gender	Female	Female	Equivalent
Termination	Crimp	Crimp	Equivalent
Insulation	Fully Insulated	Fully Insulated	Equivalent
Mounting Type	Free Hanging (In-Line), Right Angle	Free Hanging (In-Line), Right Angle	Equivalent
Contact Material	Brass	Brass	Equivalent
Color	Red	Red	Equivalent
Insulation Diameter	0.150" (3.81mm)	0.165" (4.19mm)	Variation
Contact Finish	Not specified	Tin	Variation
Packaging	Tape & Reel (TR)	Cut Tape (CT)	Variation

Engineering Selection Recommendations

Both the Molex 0190060007 and TE Connectivity 2-520334-2 are active products with full regulatory compliance. The Molex part carries ROHS3 Compliant status and REACH Unaffected designation. The TE Connectivity substitute is RoHS Compliant with REACH status listed as Vendor Undefined.

Selection between these parts should be based on:

Packaging requirements: Molex is supplied in Tape & Reel format; TE Connectivity is supplied in Cut Tape format
Insulation diameter tolerance: Molex specifies 0.150" (3.81mm); TE Connectivity specifies 0.165" (4.19mm)
Contact finish specification: TE Connectivity provides tin finish; Molex finish is not specified
Inventory availability and lead time considerations

Both parts share identical electrical and mechanical engagement specifications and are suitable for equivalent circuit applications.

Frequently Asked Questions (FAQ)

Q: What makes TE Connectivity 2-520334-2 a valid substitute for Molex 0190060007?

A: Both parts share identical tab width (0.187"), tab thickness (0.020"), wire gauge rating (18-22 AWG), terminal orientation (90° angled flag), gender (female), termination method (crimp), insulation type (fully insulated), and mounting configuration (free hanging, right angle). These parameters define functional compatibility in quick-connect applications.

Q: Are there differences between these parts I should be aware of?

A: Yes. The insulation diameter differs slightly: Molex is 0.150" (3.81mm) versus TE Connectivity at 0.165" (4.19mm). TE Connectivity specifies tin contact finish while Molex does not specify finish. Packaging differs: Molex is supplied in Tape & Reel while TE Connectivity is supplied in Cut Tape. These variations do not affect electrical or mechanical engagement but may impact assembly processes and wire fit characteristics.

Q: Which part should I select for new designs?

A: Selection depends on application requirements. If insulation diameter tolerance is critical to your wire gauge or connector housing, verify compatibility with your specific wire and receptacle specifications. If packaging format affects your assembly process, choose accordingly. Both parts meet active product status and regulatory compliance requirements.

Q: Can I use these parts interchangeably in existing assemblies?

A: Interchangeability depends on your specific connector housing and wire specifications. The slight insulation diameter difference may affect fit in some applications. Verify that the receiving connector housing accommodates the insulation diameter of your selected part.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging is supplied on continuous tape wound on reels, suitable for automated assembly processes. Cut Tape packaging is supplied as individual pieces cut from tape, suitable for manual assembly or smaller volume applications. Both contain the same component; packaging format differs only.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message