SCHURTER 0040.5001.2 Equivalent & Substitute Parts

Part Overview

The SCHURTER 0040.5001.2 is a Power Entry Connector Receptacle with Male Blades, IEC 320-C14 configuration, designed for panel mount applications with flange mounting. This component is classified as Obsolete, necessitating identification of active equivalent parts for new designs and ongoing production requirements. The part accommodates a fuse and features quick connect termination suitable for 10A at 250VAC applications in commercial unfiltered configurations.

Substiute Parts

0040.5001.2

SCHURTER Inc.In Stock: 9180040.5001.2 Datasheet

Current PartRFQ

4301.0501

SCHURTER Inc.In Stock: 20984301.0501 Datasheet

SimilarRFQ

4707.2100

SCHURTER Inc.In Stock: 10754707.2100 Datasheet

SimilarRFQ

PE000DM6E

TE Connectivity Corcom FiltersIn Stock: 1119PE000DM6E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SCHURTER 0040.5001.2 is determined by the following critical parameters:

• Connector Style: IEC 320-C14 (mandatory match)
• Connector Type: Receptacle, Male Blades - Module (mandatory match)
• Number of Positions: 3 (mandatory match)
• Mounting Type: Panel Mount, Flange (mandatory match)
• Accommodates a Fuse: Yes (mandatory match)
• Material Flammability Rating: UL94 V-0 (mandatory match)
• Ingress Protection: IP40 (mandatory match)
• RoHS Status: ROHS3 Compliant (mandatory match)

Acceptable variations within substitute parts include:

• Current Rating - Appliance Inlet: 10A or higher
• Voltage Rating - Appliance Inlet: 250VAC or higher
• Panel Cutout Dimensions: Different rectangular or variable configurations
• Filter Type: Unfiltered or Filtered (EMI/RFI)
• Approval Agencies: Subset or superset of CSA, UL, ENEC, CCC, cULus, VDE
• Termination: Quick Connect within 0.187" to 0.189" range

The identified substitute parts meet these criteria with the following considerations:

SCHURTER 4301.0501: Active status, identical electrical ratings, rectangular panel cutout, expanded approval agencies (CCC, CSA, ENEC, UL).

SCHURTER 4707.2100: Active status, identical electrical ratings, variable panel cutout dimensions, front or rear side mount capability, reduced approval agencies (cULus, ENEC).

TE Connectivity Corcom Filters PE000DM6E: Active status, filtered configuration with EMI/RFI suppression, reduced current rating (6A), reduced voltage rating (120VAC), twin fused holder, expanded approval agencies (CSA, UL, VDE).

Parameter Comparison

Engineering Selection Recommendations

SCHURTER 4301.0501 is the primary recommended substitute for the obsolete SCHURTER 0040.5001.2. This part maintains identical electrical specifications (10A at 250VAC), matching connector configuration, and equivalent mechanical mounting. The active product status ensures ongoing availability. The KEA series provides expanded regulatory approvals (CCC, CSA, ENEC, UL) compared to the original part, supporting broader market applications. Panel cutout dimensions differ (rectangular 27.50mm x 31.50mm versus square 33.30mm x 33.30mm), requiring panel modification assessment.

SCHURTER 4707.2100 serves as an alternative substitute with identical electrical ratings and active status. The 4707 series offers variable panel cutout dimensions and front or rear side mount flexibility, accommodating diverse panel integration scenarios. Regulatory approvals are limited to cULus and ENEC, which may restrict use in certain markets requiring CSA or UL certification.

TE Connectivity Corcom Filters PE000DM6E is suitable only for applications requiring EMI/RFI filtering with reduced electrical specifications. The 6A at 120VAC rating is incompatible with the original 10A at 250VAC requirement. This part is appropriate for filtered power entry applications in lower-voltage systems. The twin fused holder configuration and shielded design provide enhanced noise suppression. Regulatory approvals include CSA, UL, and VDE.

Frequently Asked Questions (FAQ)

Q: Can SCHURTER 4301.0501 directly replace SCHURTER 0040.5001.2 without panel modification?

A: Electrical and mechanical compatibility is confirmed. However, panel cutout dimensions differ: 4301.0501 requires rectangular 27.50mm x 31.50mm versus the original square 33.30mm x 33.30mm. Panel drilling or modification is necessary.

Q: What is the primary difference between SCHURTER 4301.0501 and SCHURTER 4707.2100?

A: Both maintain identical electrical ratings (10A at 250VAC). The 4301.0501 features a fixed rectangular panel cutout (27.50mm x 31.50mm) with comprehensive regulatory approvals (CCC, CSA, ENEC, UL). The 4707.2100 offers variable panel cutout dimensions and front or rear mounting capability but with limited approvals (cULus, ENEC).

Q: Is TE Connectivity Corcom Filters PE000DM6E compatible with the original application?

A: Electrical compatibility is limited. The PE000DM6E operates at 6A and 120VAC, compared to the original 10A at 250VAC specification. This part is suitable only for applications requiring filtered power entry at reduced electrical ratings. The filtered configuration provides EMI/RFI suppression not present in the original unfiltered design.

Q: What regulatory approvals are critical for my application?

A: Approval requirements depend on target markets. SCHURTER 4301.0501 provides the broadest coverage (CCC, CSA, ENEC, UL). SCHURTER 4707.2100 supports cULus and ENEC markets. TE Connectivity PE000DM6E includes CSA, UL, and VDE approvals. Verify specific market requirements before selection.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. SCHURTER 0040.5001.2, 4301.0501, 4707.2100, and TE Connectivity PE000DM6E are all ROHS3 compliant.

Q: What is the difference in fuse holder configuration?

A: SCHURTER 0040.5001.2, 4301.0501, and 4707.2100 feature single fuse holder configurations. TE Connectivity PE000DM6E includes a twin fused holder, providing dual-channel fuse protection suitable for filtered applications.

Q: Can I use SCHURTER 4707.2100 for both front and rear panel mounting?

A: Yes. The 4707.2100 series supports both front and rear side mount configurations, offering installation flexibility not available in the original 0040.5001.2 or the 4301.0501.