LED Panel Indicator 0035.0737 - Equivalent & Substitute Parts

Part Overview

The SCHURTER Inc. 0035.0737 is a 5mm LED panel indicator with green lamp color, round domed lens, solder lug termination, and IP67 ingress protection. This component is classified as obsolete, making identification of equivalent and substitute parts essential for ongoing system support and new design implementations. The part operates within the LFM series and maintains ROHS3 compliance and REACH unaffected status.

Substiute Parts

0035.0737

SCHURTER Inc.In Stock: 10730035.0737 Datasheet

Current PartRFQ

0035.0727

SCHURTER Inc.In Stock: 10640035.0727 Datasheet

Parametric EquivalentRFQ

Q6P7BXXG02E

APEM Inc.In Stock: 765Q6P7BXXG02E Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the 0035.0737 is based on the following critical parameters: lamp color (green), lens size (5mm T-1 3/4), lens style (round domed), panel cutout shape (round), ingress protection rating (IP67), and regulatory compliance (ROHS3, REACH unaffected).

Two substitute categories are identified:

Parametric Equivalent: The 0035.0727 maintains identical specifications across all critical parameters. This part differs only in reflector design (internal versus external) and packaging format (bulk versus standard), with active product status and higher inventory availability.

Similar Substitute: The Q6P7BXXG02E from APEM Inc. shares the green lamp color, round domed lens style, round panel cutout, and IP67 ingress protection. However, this part operates at different electrical specifications (2V, 20mA), features a smaller lens size (3mm T-1), requires a different panel cutout dimension (0.24" / 6.10mm), and uses wire leads instead of solder lug termination. This substitute is suitable only when panel geometry and termination method can be accommodated in the design.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement: The 0035.0727 is the primary substitute for the obsolete 0035.0737. Both parts maintain identical mechanical and environmental specifications, with the 0035.0727 offering active product status and established supply chain availability. This part is suitable for direct substitution in existing designs without modification.

For Design Flexibility: The Q6P7BXXG02E may be considered when panel geometry constraints permit a smaller lens size (3mm versus 5mm) and panel cutout diameter (6.10mm versus 8.38mm). This substitute requires circuit redesign to accommodate 2V operation and 20mA current draw, and necessitates modification of the termination interface from solder lug to wire leads. This option is applicable only when mechanical and electrical integration can be accommodated.

All substitute options maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment with the original component.

Frequently Asked Questions (FAQ)

Q: Can the 0035.0727 be used as a direct replacement for the 0035.0737?

A: Yes. The 0035.0727 maintains identical specifications for lamp color, lens size, lens style, panel cutout dimensions, termination method, and ingress protection rating. The only differences are reflector design (internal versus external) and packaging format. No design modifications are required.

Q: What are the key differences between the 0035.0737 and Q6P7BXXG02E?

A: The Q6P7BXXG02E differs in lens size (3mm T-1 versus 5mm T-1 3/4), panel cutout diameter (6.10mm versus 8.38mm), termination style (wire leads versus solder lug), and electrical specifications (2V, 20mA versus unspecified). These differences require mechanical and electrical design modifications.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. Both the 0035.0727 and Q6P7BXXG02E are ROHS3 compliant and REACH unaffected, maintaining regulatory alignment with the original 0035.0737.

Q: What is the difference between the 0035.0737 and 0035.0727 reflector designs?

A: The 0035.0737 features an external reflector, while the 0035.0727 features an internal reflector. Both designs maintain the same optical and mechanical interface specifications for panel mounting applications.

Q: Can the Q6P7BXXG02E be used without circuit modifications?

A: No. The Q6P7BXXG02E operates at 2V with 20mA current draw, requires a smaller panel cutout (6.10mm), and uses wire leads instead of solder lug termination. Circuit and mechanical design modifications are necessary for integration.