SCHURTER 0032.0804 Cartridge Fuse Holder - Equivalent & Substitute Parts

Part Overview

The SCHURTER 0032.0804 is a panel-mounted cartridge fuse holder rated for 6.3 A at 250V, designed for 5mm x 20mm fuses with quick connect termination. This component is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing system maintenance and new design implementations. The part operates as a single-circuit protective device interface suitable for industrial and commercial electrical applications.

Substiute Parts

0032.0804

SCHURTER Inc.In Stock: 8050032.0804 Datasheet

Current PartRFQ

85100001009

Littelfuse Inc.In Stock: 99385100001009 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SCHURTER 0032.0804 is determined by the following critical parameters:

• Fuse Size Compatibility: 5mm x 20mm cartridge format (non-negotiable mechanical constraint)
• Voltage Rating: Minimum 250V (equal or higher acceptable)
• Mounting Configuration: Panel mount orientation with quick connect termination
• Circuit Count: Single circuit (1 circuit)
• Termination Interface: Quick Connect - 0.110" (2.8mm) connector type

The substitute part Littelfuse 85100001009 maintains compatibility across all mechanical and electrical interface parameters. The current rating difference (10 A vs. 6.3 A) represents an uprated alternative suitable for applications requiring higher fault protection capacity within the same form factor and voltage class.

Parameter Comparison

Engineering Selection Recommendations

The Littelfuse 85100001009 serves as a direct mechanical and electrical substitute for the obsolete SCHURTER 0032.0804. Both components maintain identical form factors, voltage ratings, and termination interfaces. The Littelfuse part carries active product status with confirmed ROHS3 compliance and defined moisture sensitivity level (MSL 1 - Unlimited), providing superior long-term availability and supply chain stability compared to the obsolete SCHURTER offering.

The 10 A current rating of the Littelfuse substitute represents an uprated protection level. System designers must verify that the higher current rating aligns with circuit protection requirements and does not compromise intended fault response characteristics.

Frequently Asked Questions (FAQ)

Q: Can the Littelfuse 85100001009 be used as a direct replacement for the SCHURTER 0032.0804?

A: Yes. Both components share identical mechanical form factors (5mm x 20mm cartridge), voltage ratings (250V), mounting configurations (panel mount), and termination interfaces (quick connect 0.110"). Physical and electrical interchangeability is confirmed.

Q: What is the significance of the current rating difference (6.3 A vs. 10 A)?

A: The Littelfuse substitute provides a higher current rating. This represents an uprated protection alternative. Circuit designers must confirm that the 10 A rating is appropriate for the intended application and does not alter required fault protection response.

Q: Are both parts RoHS compliant?

A: Yes. Both the SCHURTER 0032.0804 and Littelfuse 85100001009 are ROHS3 compliant, meeting current environmental and material restriction standards.

Q: Why is the SCHURTER part listed as obsolete?

A: Obsolete status indicates the manufacturer has discontinued production. The Littelfuse 85100001009 provides an active, currently manufactured alternative with equivalent mechanical and electrical specifications.

Q: What packaging format is available for the Littelfuse substitute?

A: The Littelfuse 85100001009 is supplied in bulk packaging, suitable for production assembly and component procurement workflows.