SCHURTER 0032.0702 Equivalent & Substitute Parts

Part Overview

The SCHURTER 0032.0702 is a cartridge fuse holder rated for 6.3 A at 250V with panel mount configuration, designed for 5mm x 20mm fuse cartridges. This component is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing system maintenance and new design implementations. The part operates as a single-circuit holder with quick connect termination suitable for standard panel installations.

Substiute Parts

0032.0702

SCHURTER Inc.In Stock: 8510032.0702 Datasheet

Current PartRFQ

85100001009

Littelfuse Inc.In Stock: 99385100001009 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SCHURTER 0032.0702 is determined by the following critical parameters:

• Fuse Size Compatibility: 5mm x 20mm cartridge format (mechanical fit requirement)
• Voltage Rating: Minimum 250V (electrical safety requirement)
• Mounting Configuration: Panel mount with quick connect termination (installation compatibility)
• Number of Circuits: Single circuit (functional equivalence)
• Fuseholder Type: Cartridge holder (operational compatibility)

The Littelfuse 85100001009 qualifies as a substitute based on matching all critical parameters. The current rating difference (10 A vs. 6.3 A) represents an uprated alternative suitable for applications requiring higher current capacity within the same voltage and mechanical envelope.

Parameter Comparison

Engineering Selection Recommendations

The Littelfuse 85100001009 is the identified substitute for the obsolete SCHURTER 0032.0702. Selection is based on:

• Active Product Status: Littelfuse 85100001009 maintains active manufacturing status, ensuring long-term availability and supply chain continuity.
• Regulatory Compliance: Both components meet ROHS3 and REACH requirements, maintaining compliance with current environmental standards.
• Mechanical and Electrical Compatibility: Identical fuse size, voltage rating, mounting configuration, and termination style ensure direct physical and electrical interchangeability.
• Current Rating Consideration: The 10 A rating of the substitute exceeds the original 6.3 A specification. This uprating is acceptable for applications where the circuit protection scheme permits higher current capacity, provided the fuse cartridge selected for use matches the original 6.3 A rating requirement.

Frequently Asked Questions (FAQ)

Q: Can the Littelfuse 85100001009 be used as a direct replacement for the SCHURTER 0032.0702?

A: Yes. Both components share identical fuse size (5mm x 20mm), voltage rating (250V), mounting type (panel mount), and termination style (quick connect 0.110"). The fuseholder itself is mechanically and electrically interchangeable. The fuse cartridge inserted into either holder determines the actual current protection level.

Q: What is the significance of the different current ratings (6.3 A vs. 10 A)?

A: The current rating printed on the fuseholder is a design specification indicating the maximum current the holder is rated to safely conduct. The actual circuit protection is determined by the fuse cartridge installed in the holder. Both holders accept standard 5mm x 20mm cartridges, allowing selection of the appropriate amperage cartridge for your application.

Q: Are there any packaging differences between these components?

A: The SCHURTER 0032.0702 packaging is unspecified in available data. The Littelfuse 85100001009 is supplied in bulk packaging. Confirm packaging requirements with your procurement process.

Q: Why is the SCHURTER part listed as obsolete?

A: Obsolete status indicates the manufacturer has discontinued production. The Littelfuse substitute maintains active production status, providing a viable path for system maintenance and new designs requiring this fuseholder category.

Q: Are both components RoHS and REACH compliant?

A: Yes. Both the SCHURTER 0032.0702 and Littelfuse 85100001009 are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.