Molex 0022285165 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Molex 0022285165 is a vertical rectangular connector header designed for through-hole mounting applications. This 16-position, single-row connector operates at a 0.100" (2.54mm) pitch and features male pins with kinked solder termination. The connector is classified as active product status and serves general-purpose, automotive, medical, and telecommunications applications. Equivalent and substitute parts are identified based on matching core electrical and mechanical parameters to ensure functional compatibility in board-to-board or cable interconnect designs.

Substiute Parts

0022285165

MolexIn Stock: 8140022285165 Datasheet

Current PartRFQ

1-826629-6

TE Connectivity AMP ConnectorsIn Stock: 61751-826629-6 Datasheet

MFR RecommendedRFQ

A2-16PA-2.54DSA(71)

Hirose Electric Co LtdIn Stock: 1138A2-16PA-2.54DSA(71) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Molex 0022285165 are qualified based on the following core parameters that determine functional interchangeability:

• Connector type classification (Header, Breakaway)
• Contact type (Male Pin)
• Number of positions and rows (16 positions, 1 row)
• Mating pitch (0.100" / 2.54mm)
• Mounting method (Through Hole)
• Fastening mechanism (Push-Pull)
• Contact finish on mating surface (Gold)
• Flammability compliance (UL94 V-0)
• RoHS3 compliance status

The identified substitute parts maintain these critical parameters while allowing variation in insulation material composition, contact length dimensions, and operating temperature ranges, which do not affect basic interconnect functionality in standard applications.

Parameter Comparison

Engineering Selection Recommendations

All three connector options maintain active product status and full compliance with ROHS3 and REACH regulations. The Molex 0022285165, TE Connectivity 1-826629-6, and Hirose A2-16PA-2.54DSA(71) are functionally equivalent for standard through-hole board interconnect applications requiring 16-position, 2.54mm pitch male pin headers with push-pull fastening.

Selection between these parts is determined by availability, supply chain considerations, and specific application requirements. The TE Connectivity 1-826629-6 offers the highest current rating at 5A with an extended operating temperature range of -65°C to 105°C. The Hirose A2-16PA-2.54DSA(71) provides a 200V voltage rating specification and operates within -55°C to 85°C. The Molex 0022285165 serves as the primary reference part with established design history in automotive, medical, and telecommunications applications.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 1-826629-6 be used as a direct replacement for the Molex 0022285165?

A: Yes. Both connectors share identical pitch (2.54mm), position count (16), contact type (male pin), mounting method (through hole), and fastening mechanism (push-pull). The primary differences are insulation material (PBT versus glass-filled polyamide) and contact length dimensions, which do not affect basic interconnect functionality.

Q: What are the dimensional differences between these three connectors?

A: Overall contact length varies: Molex 0022285165 measures 0.520" (13.21mm), TE Connectivity 1-826629-6 measures 0.500" (12.70mm), and Hirose A2-16PA-2.54DSA(71) measures 0.454" (11.54mm). Insulation height also differs across the three designs. These variations may affect board layout spacing and mating depth considerations in constrained applications.

Q: Are all three parts suitable for automotive applications?

A: The Molex 0022285165 explicitly lists automotive applications. The TE Connectivity 1-826629-6 and Hirose A2-16PA-2.54DSA(71) do not specify automotive applications in the provided data. Automotive-specific qualification requirements should be verified with the respective manufacturers if automotive use is required.

Q: What is the difference in current and voltage ratings?

A: The TE Connectivity 1-826629-6 is rated for 5A current with no specified voltage rating. The Hirose A2-16PA-2.54DSA(71) is rated for 3A current at 200V. The Molex 0022285165 does not provide current or voltage ratings in the available specifications. Application requirements should determine which rating specification is appropriate.

Q: Do all three connectors have the same moisture sensitivity level?

A: Yes. All three parts are classified as MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: What is the significance of the different insulation colors?

A: Insulation color (black, green, or black) is a visual identification feature only and does not affect electrical or mechanical performance. Color selection is typically driven by manufacturing standards or design documentation requirements.