Molex 0022285113 Equivalent & Substitute Parts

Part Overview

The Molex 0022285113 is an 11-position vertical header connector with 0.100" (2.54mm) pitch, designed for through-hole board-to-board or cable applications. This connector features male pins with gold-plated mating contacts and tin-plated posts, housed in a black polyamide nylon insulation body rated UL94 V-0. The part is active in production with 987 units currently in stock.

Equivalent and substitute parts are identified when design requirements allow flexibility in contact length, contact finish materials, or insulation composition while maintaining core electrical and mechanical compatibility. Substitutes enable procurement alternatives when primary inventory is constrained or when application-specific performance characteristics justify alternative contact geometries.

Key Parameters

Parameter	Value
Manufacturer Part Number	0022285113
Manufacturer	Molex
Category	Rectangular Connectors
Connector Type	Header, Breakaway
Contact Type	Male Pin
Number of Positions	11
Pitch - Mating	0.100" (2.54mm)
Number of Rows	1
Mounting Type	Through Hole
Termination	Kinked Pin, Solder
Fastening Type	Push-Pull
Shrouding	Unshrouded
Contact Shape	Square
Insulation Material	Polyamide (PA), Nylon, Glass Filled
Insulation Color	Black
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)
Product Status	Active

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0022285113 is determined by strict adherence to the following core parameters:

Non-negotiable Parameters (must match exactly):

Number of positions: 11
Pitch - mating: 0.100" (2.54mm)
Number of rows: 1
Contact type: Male pin
Mounting type: Through hole
Fastening type: Push-pull
Connector style: Board to board or cable
Shrouding: Unshrouded
Contact shape: Square
Insulation color: Black
Material flammability rating: UL94 V-0

Allowable Variation Parameters:

Contact length (mating and post): Variation permitted based on application requirements
Contact finish material (mating surface): Gold or tin acceptable
Contact finish thickness: Variation within industry standards
Insulation material composition: Polyamide, PBT, or thermoplastic acceptable
Operating temperature range: Variation acceptable if application requirements are met
Current rating: Variation acceptable if application requirements are met
Contact material: Copper alloy or phosphor bronze acceptable
Termination style: Solder or kinked pin acceptable

Six substitute parts meet these criteria: 961111-6404-AR (3M), PBC11SAAN, PBC11SACN, PBC11SAEN, PEC11SAAN, and PEC11SABN (all Sullins Connector Solutions).

Parameter Comparison

Parameter	Molex 0022285113	3M 961111-6404-AR	Sullins PBC11SAAN	Sullins PBC11SACN	Sullins PBC11SAEN	Sullins PEC11SAAN	Sullins PEC11SABN
Number of Positions	11	11	11	11	11	11	11
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Rows	1	1	1	1	1	1	1
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Shrouding	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded
Contact Shape	Square	Square	Square	Square	Square	Square	Square
Insulation Color	Black	Black	Black	Black	Black	Black	Black
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Contact Length - Mating	0.240" (6.10mm)	0.217" (5.50mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)
Contact Length - Post	0.135" (3.43mm)	0.130" (3.30mm)	0.120" (3.05mm)	0.320" (8.13mm)	0.520" (13.21mm)	0.120" (3.05mm)	0.230" (5.84mm)
Overall Contact Length	0.465" (11.81mm)	0.445" (11.30mm)	0.450" (11.43mm)	0.650" (16.51mm)	0.850" (21.59mm)	0.450" (11.43mm)	0.560" (14.22mm)
Insulation Height	0.090" (2.29mm)	0.098" (2.50mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Contact Finish - Mating	Gold	Gold	Gold	Gold	Gold	Tin	Tin
Contact Finish - Post	Tin	Tin	Tin	Tin	Tin	Tin	Tin
Insulation Material	Polyamide (PA), Nylon, Glass Filled	Thermoplastic	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)
Operating Temperature	Not specified	-25°C ~ 105°C	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C
Current Rating	Not specified	2A	3A	3A	3A	3A	3A
RoHS Status	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	Not Applicable	Not Applicable	Not Applicable	Not Applicable	Not Applicable

Engineering Selection Recommendations

All substitute parts listed maintain active product status and comply with RoHS and REACH regulations equivalent to the Molex 0022285113. Selection among substitutes depends on specific application requirements for contact geometry and material composition.

3M 961111-6404-AR provides the closest dimensional alignment to the original part with minimal variation in overall contact length (0.445" versus 0.465"). This part operates across a narrower temperature range (-25°C to 105°C) and carries a 2A current rating. The thermoplastic insulation material differs from the original polyamide composition.

Sullins PBC11SAAN and PEC11SAAN offer identical contact length specifications (0.450" overall) with extended operating temperature range (-65°C to 125°C) and 3A current rating. PBC11SAAN features gold-plated mating contacts; PEC11SAAN features tin-plated mating contacts. Both use PBT insulation material.

Sullins PBC11SACN and PBC11SAEN provide extended post contact lengths (0.320" and 0.520" respectively) for applications requiring deeper board penetration or longer solder joint engagement. Overall contact lengths reach 0.650" and 0.850" respectively. Both maintain -65°C to 125°C operating range and 3A current rating with gold-plated mating contacts.

Sullins PEC11SABN combines tin-plated mating contacts with 0.230" post length, yielding 0.560" overall contact length. This configuration bridges dimensional requirements between standard and extended-post variants while maintaining -65°C to 125°C operating range and 3A current rating.

Frequently Asked Questions (FAQ)

Q: Can I substitute any of these parts directly into a design using the Molex 0022285113?

A: Direct substitution is mechanically and electrically feasible for all listed parts provided the application accommodates variations in contact length, contact finish material, and insulation composition. The 11-position 2.54mm pitch configuration is identical across all parts. Verify that PCB pad depth and mating connector cavity depth accommodate the specific contact length of the substitute part selected.

Q: What is the primary difference between the Sullins PBC and PEC series?

A: The PBC series features gold-plated mating contacts; the PEC series features tin-plated mating contacts. Both series use phosphor bronze contact material and PBT insulation. Contact finish selection depends on application requirements for corrosion resistance and mating cycle durability.

Q: Why do some Sullins parts have longer post contacts?

A: Post contact length determines solder joint depth on the PCB. PBC11SACN (0.320" post) and PBC11SAEN (0.520" post) accommodate applications requiring deeper solder engagement for mechanical strength or thermal management. Standard-length posts (0.120" to 0.230") suit conventional PCB thicknesses and soldering processes.

Q: Are all substitute parts RoHS compliant?

A: Yes. The Molex 0022285113 is ROHS3 compliant. The 3M 961111-6404-AR is RoHS compliant. All Sullins parts (PBC11SAAN, PBC11SACN, PBC11SAEN, PEC11SAAN, PEC11SABN) are ROHS3 compliant. All parts are REACH unaffected.

Q: What is the difference between the Molex original and 3M substitute in terms of operating temperature?

A: The Molex 0022285113 does not specify an operating temperature range. The 3M 961111-6404-AR operates from -25°C to 105°C. All Sullins substitutes operate from -65°C to 125°C, providing extended temperature capability for demanding applications.

Q: Can I use the 3M part as a direct replacement if my application requires 2A current?

A: The 3M 961111-6404-AR is rated for 2A current. If your application requires exactly 2A and operates within -25°C to 105°C, this part is suitable. However, all Sullins substitutes are rated for 3A, providing additional current capacity margin. Verify that your application's actual current draw and thermal environment align with the selected part's specifications.

Q: What packaging is available for these parts?

A: All parts listed are supplied in bulk packaging. Inventory availability: Molex 0022285113 (987 units), 3M 961111-6404-AR (1768 units), Sullins PBC11SAAN (1885 units), PBC11SACN (1304 units), PBC11SAEN (1170 units), PEC11SAAN (1089 units), PEC11SABN (1124 units).

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message