Molex 0022285103 Equivalent & Substitute Parts

Part Overview

The Molex 0022285103 is a rectangular connector header designed for through-hole mounting applications. This 10-position, single-row connector operates at a 0.100" (2.54mm) pitch and features male pins with kinked solder termination. The part is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Equivalent and substitute parts are identified to support design flexibility, inventory management, and supply chain continuity for applications requiring 10-position 2.54mm pitch header connectors.

Substiute Parts

0022285103

MolexIn Stock: 11680022285103 Datasheet

Current PartRFQ

350-10-110-00-001000

Mill-Max Manufacturing Corp.In Stock: 1416350-10-110-00-001000 Datasheet

MFR RecommendedRFQ

800-10-010-10-001000

Mill-Max Manufacturing Corp.In Stock: 2034800-10-010-10-001000 Datasheet

MFR RecommendedRFQ

800-10-010-10-002000

Mill-Max Manufacturing Corp.In Stock: 1591800-10-010-10-002000 Datasheet

MFR RecommendedRFQ

961110-6404-AR

3MIn Stock: 1365961110-6404-AR Datasheet

MFR RecommendedRFQ

PBC10SAAN

Sullins Connector SolutionsIn Stock: 3488PBC10SAAN Datasheet

MFR RecommendedRFQ

PBC10SABN

Sullins Connector SolutionsIn Stock: 912PBC10SABN Datasheet

MFR RecommendedRFQ

PBC10SACN

Sullins Connector SolutionsIn Stock: 1272PBC10SACN Datasheet

MFR RecommendedRFQ

PBC10SADN

Sullins Connector SolutionsIn Stock: 1502PBC10SADN Datasheet

MFR RecommendedRFQ

PEC10SAAN

Sullins Connector SolutionsIn Stock: 2073PEC10SAAN Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0022285103 is determined by the following critical parameters:

Primary Matching Criteria:

• Pitch - Mating: 0.100" (2.54mm)
• Number of Positions: 10
• Number of Rows: 1
• Contact Type: Male Pin
• Mounting Type: Through Hole
• Fastening Type: Push-Pull
• Shrouding: Unshrouded

Secondary Compatibility Factors:

• Termination method (Solder acceptable)
• Contact finish on mating surface (Gold preferred for signal integrity)
• Insulation material (Polyamide, Polycyclohexylenedimethylene Terephthalate, Polybutylene Terephthalate acceptable)
• Flammability rating (UL94 V-0 required)
• RoHS3 compliance status
• MSL rating (1 acceptable)

All substitute parts listed meet the primary matching criteria and maintain compatibility with the original part's electrical and mechanical interface requirements.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain Active product status and comply with RoHS3 requirements. Selection between the Molex 0022285103 and substitute parts depends on specific application requirements and contact length specifications.

Mill-Max 350 and 800 Series: These parts feature circular contact geometry and polycyclohexylenedimethylene terephthalate insulation. The 350-10-110-00-001000 and 800-series variants differ in contact length dimensions, affecting insertion depth and board clearance. All three Mill-Max options provide gold-plated post termination.

3M 961110-6404-AR: This part offers square contact geometry matching the Molex design and includes specified operating temperature range (-25°C to 105°C) and current rating (2A). UL94 V-0 flammability rating is confirmed.

Sullins PBC Series: The PBC10SAAN, PBC10SABN, PBC10SACN, and PBC10SADN variants share identical mating contact length (0.230") but differ in post length, ranging from 0.120" to 0.420". These parts feature phosphor bronze contacts with tin post finish and support operating temperatures from -65°C to 125°C with 3A current rating. All carry UL94 V-0 certification.

Sullins PEC10SAAN: This variant differs from PBC series by featuring tin-plated mating contacts instead of gold. All other electrical and mechanical specifications align with PBC10SAAN.

Selection should prioritize parts with matching contact length specifications for the target application's board thickness and clearance requirements.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the Molex 0022285103?

A: The primary substitution criteria are 0.100" (2.54mm) pitch, 10-position single-row configuration, male pin contact type, through-hole mounting, push-pull fastening, and unshrouded design. All listed parts meet these core requirements.

Q: How do contact length differences affect compatibility?

A: Contact length variations determine insertion depth into mating connectors and available board clearance. The Molex 0022285103 specifies 0.240" mating contact length and 0.135" post length. Substitute parts with different contact lengths may require board layout adjustments. Mill-Max 350 series provides 0.166" mating length, Mill-Max 800-10-010-10-001000 provides 0.195" mating length, and Sullins PBC series provides 0.230" mating length.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. The Molex 0022285103 and all listed substitute parts carry ROHS3 Compliant or RoHS Compliant status. The 3M 961110-6404-AR carries RoHS Compliant designation.

Q: What is the difference between PBC and PEC series from Sullins?

A: The primary difference is contact finish on the mating surface. PBC series features gold-plated mating contacts, while PEC10SAAN features tin-plated mating contacts. Both series share identical post length variants and operating specifications.

Q: Do all substitute parts support the same operating temperature range?

A: No. The Molex 0022285103 does not specify operating temperature. The 3M 961110-6404-AR operates from -25°C to 105°C. Sullins PBC and PEC series operate from -65°C to 125°C. Mill-Max parts do not specify operating temperature ranges.

Q: What packaging format is available for these parts?

A: All listed parts are supplied in Bulk packaging.

Q: Are there differences in insulation material between substitute options?

A: Yes. The Molex 0022285103 uses polyamide nylon glass-filled insulation. Mill-Max 350 and 800 series use polycyclohexylenedimethylene terephthalate (PCT). The 3M 961110-6404-AR uses thermoplastic insulation. Sullins PBC and PEC series use polybutylene terephthalate (PBT). All materials support UL94 V-0 flammability rating where specified.

Q: Which substitute part offers the highest current rating?

A: Sullins PBC and PEC series support 3A current rating. The 3M 961110-6404-AR supports 2A. Mill-Max and Molex parts do not specify current ratings.