Molex 0022284365 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Molex 0022284365 is a vertical rectangular connector header designed for through-hole mounting applications. This 36-position connector operates at 0.100" (2.54mm) pitch and is part of the KK254 and 42375 series. The component is actively manufactured and widely used in automotive, medical, telecommunications, and general-purpose applications. Finding equivalent substitute parts is necessary when the primary part is unavailable, when alternative manufacturers offer improved lead times, or when design requirements allow for compatible alternatives that meet the same electrical and mechanical specifications.

Key Parameters

Parameter	Value
Manufacturer Part Number	0022284365
Manufacturer	Molex
Category	Rectangular Connectors
Connector Type	Header, Breakaway
Contact Type	Male Pin
Number of Positions	36
Number of Rows	1
Pitch - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Contact Shape	Square
Shrouding	Unshrouded
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Active

Substitute Part Grouping Explanation

Substitute parts for the Molex 0022284365 are qualified based on the following critical parameters that must match or be compatible:

Connector Type: Header, Breakaway configuration
Contact Type: Male Pin
Number of Positions: 36 positions
Number of Rows: 1 row
Pitch - Mating: 0.100" (2.54mm) exact match
Mounting Type: Through Hole
Termination: Solder
Fastening Type: Push-Pull
Contact Shape: Square
Shrouding: Unshrouded
Material Flammability Rating: UL94 V-0
Moisture Sensitivity Level: 1 (Unlimited)

Substitute parts from TE Connectivity AMP Connectors (AMPMODU Mod II series) and 3M (929 series) meet these core requirements. Variations in contact length, insulation height, contact finish materials, and operating temperature ranges are secondary parameters that may differ between substitutes while maintaining functional compatibility in board-to-board or cable applications.

Parameter Comparison

Parameter	Molex 0022284365	TE 3-826629-6	TE 3-826646-6	TE 3-826926-6	3M 929450-01-36-I	3M 929647-02-36-I
Connector Type	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header, Breakaway
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	36	36	36	36	36	36
Number of Rows	1	1	1	1	1	1
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Contact Shape	Square	Square	Square	Square	Square	Square
Shrouding	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded
Contact Length - Mating	0.295" (7.49mm)	0.264" (6.70mm)	0.228" (5.80mm)	0.264" (6.70mm)	0.295" (7.49mm)	0.235" (5.97mm)
Contact Length - Post	0.120" (3.05mm)	0.126" (3.20mm)	0.126" (3.20mm)	0.126" (3.20mm)	0.130" (3.30mm)	0.210" (5.33mm)
Overall Contact Length	0.505" (12.83mm)	0.500" (12.70mm)	0.465" (11.81mm)	0.500" (12.70mm)	0.535" (14.69mm)	0.545" (13.84mm)
Insulation Height	0.090" (2.29mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.100" (2.54mm)
Contact Finish - Mating	Gold	Gold	Gold	Tin	Gold	Gold
Contact Finish - Post	Tin	Tin	Tin	Tin	Gold	Gold
Insulation Material	Polyamide (PA), Nylon, Glass Filled	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Insulation Color	Black	Green	Green	Green	Black	Black
Operating Temperature	Not specified	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C
Current Rating (Amps)	Not specified	5A	5A	5A	2.5A	2.5A
RoHS Status	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All listed substitute parts maintain active product status and comply with RoHS and UL94 V-0 flammability requirements. Selection among substitutes depends on specific application requirements:

TE Connectivity AMPMODU Mod II Series (3-826629-6, 3-826646-6, 3-826926-6) offer extended operating temperature range (-65°C to 105°C) and higher current ratings (5A), making them suitable for demanding automotive and industrial applications. These parts use PBT insulation material and are available in high inventory quantities.

3M 929 Series (929450-01-36-I, 929647-02-36-I, and variants) provide gold-plated post finishes and operate across -40°C to 105°C. The 929 series variants differ primarily in contact post length, allowing selection based on specific PCB stack-up requirements. Current rating is 2.5A across the 929 series.

Contact length variations between substitutes require verification against PCB design specifications. The Molex 0022284365 features 0.120" post length; TE parts offer 0.126" to 0.130" post lengths, while 3M variants range from 0.110" to 0.610" depending on the specific model suffix. Insulation height differences (0.090" to 0.110") may affect board clearance in compact designs.

Frequently Asked Questions (FAQ)

Q: Can I substitute a 3M 929 series connector for the Molex 0022284365 in my design?

A: Yes, provided your application tolerates the differences in contact post length and operating temperature range. The 3M 929 series operates at -40°C to 105°C versus the unspecified range for the Molex part. If your design requires the extended -65°C lower limit, TE Connectivity AMPMODU parts are more appropriate.

Q: What is the significance of contact post length differences between substitutes?

A: Contact post length determines how deeply the connector penetrates the PCB. The Molex 0022284365 has a 0.120" post length. TE parts offer 0.126" to 0.130", and 3M variants range from 0.110" to 0.610" depending on model. Verify your PCB thickness and solder pad depth accommodate the substitute's post length to ensure reliable solder joints.

Q: Are all substitutes RoHS compliant?

A: Yes. The Molex 0022284365 is ROHS3 compliant. All listed substitutes are RoHS compliant or ROHS3 compliant, meeting regulatory requirements for restricted substances.

Q: Does insulation color affect compatibility?

A: Insulation color is a visual identifier only and does not affect electrical or mechanical compatibility. The Molex part features black insulation, while TE AMPMODU parts are green. This difference is cosmetic and does not impact circuit function.

Q: What current rating should I use for circuit design?

A: The Molex 0022284365 does not specify a current rating. TE Connectivity substitutes are rated at 5A, while 3M 929 series parts are rated at 2.5A. Use the lower rating (2.5A) if mixing part sources in the same design, or select parts consistently from one manufacturer to maintain uniform current handling capability.

Q: Can I use a 3M 929647-03-36-I (0.410" post length) in place of the standard Molex part?

A: Only if your PCB design accommodates the longer 0.410" post length. This variant is suitable for applications requiring deeper PCB penetration or thicker board assemblies. Verify solder pad geometry and through-hole depth before substitution.

Q: Are there inventory considerations when selecting substitutes?

A: Yes. Inventory levels vary significantly. The Molex 0022284365 has 941 units in stock. TE 3-826926-6 offers the highest availability at 2,515 units. 3M 929647-02-36-I has 892 units. Consider lead time and availability when selecting substitutes for production schedules.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message