Molex 0022281110 Equivalent & Substitute Parts

Part Overview

The Molex 0022281110 is an 11-position rectangular connector header with right-angle through-hole mounting and 2.54mm pitch. This connector is designed for board-to-board or cable applications in automotive, medical, telecommunications, and general-purpose environments. The part is currently active in production with 804 units in stock. Equivalent parts are identified when design requirements necessitate alternative sourcing due to inventory constraints, supply chain considerations, or specific application needs while maintaining electrical and mechanical compatibility.

Substiute Parts

0022281110

MolexIn Stock: 8840022281110 Datasheet

Current PartRFQ

1-640457-1

TE Connectivity AMP ConnectorsIn Stock: 124771-640457-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0022281110 is determined by the following critical parameters:

• Pitch - Mating: 0.100" (2.54mm) — must match exactly for PCB footprint compatibility
• Number of Positions: 11 — must match for circuit connectivity
• Mounting Type: Through Hole, Right Angle — must match for board assembly orientation
• Contact Type: Male Pin — must match for mating interface
• Shrouding: Shrouded - 1 Wall — must match for mechanical alignment
• Termination: Solder — must match for assembly process compatibility
• Material Flammability Rating: UL94 V-0 — must match for safety compliance

The TE Connectivity AMP Connectors part number 1-640457-1 meets all critical substitution criteria. Both connectors share identical pitch, position count, mounting configuration, contact type, shrouding design, termination method, and flammability rating. These parameters ensure mechanical and electrical interchangeability in applications requiring 11-position 2.54mm pitch right-angle headers.

Parameter Comparison

Engineering Selection Recommendations

Both the Molex 0022281110 and TE Connectivity 1-640457-1 are active production parts with ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts should be based on:

• Inventory Availability: Molex 0022281110 has 804 units in stock; TE Connectivity 1-640457-1 has 12,460 units available
• Supply Chain Requirements: TE Connectivity part offers higher stock levels for high-volume production scenarios
• Application Compliance: Both parts meet automotive, medical, telecommunications, and general-purpose application requirements
• Regulatory Status: Both parts are ROHS3 compliant and REACH unaffected or vendor-undefined, suitable for regulated industries

No additional testing or verification is required when substituting between these parts, as all critical electrical and mechanical parameters are identical.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 1-640457-1 be used as a direct replacement for the Molex 0022281110?

A: Yes. Both connectors share identical pitch (2.54mm), position count (11), mounting type (through-hole right-angle), contact type (male pin), shrouding (1-wall), termination method (solder), and flammability rating (UL94 V-0). They are mechanically and electrically interchangeable.

Q: Are there differences in contact dimensions between these parts?

A: Contact length specifications differ slightly. The Molex part has a post length of 0.120" (3.05mm) and insulation height of 0.284" (7.21mm), while the TE Connectivity part has a post length of 0.140" (4.66mm) and insulation height of 0.225" (5.72mm). These dimensional variations do not affect compatibility for standard PCB applications with through-hole solder termination.

Q: What is the operating temperature range for these connectors?

A: The TE Connectivity 1-640457-1 specifies an operating temperature range of -55°C to 105°C. The Molex 0022281110 does not provide an explicit operating temperature specification in the available data.

Q: Are both parts suitable for automotive applications?

A: Yes. The Molex 0022281110 lists automotive as an approved application. The TE Connectivity 1-640457-1 is designated for general-purpose applications. Both parts meet UL94 V-0 flammability requirements and ROHS3 compliance standards applicable to automotive environments.

Q: What is the voltage rating for these connectors?

A: The TE Connectivity 1-640457-1 has a voltage rating of 250VAC. The Molex 0022281110 does not provide an explicit voltage rating specification in the available data.

Q: Are these connectors moisture sensitive?

A: No. Both parts have a Moisture Sensitivity Level (MSL) of 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.