Molex 0022153053 FFC Connector - Equivalent & Substitute Parts

Part Overview

The Molex 0022153053 is a 5-position FFC (Flat Flexible) connector with bottom-mounted contacts, 0.100" (2.54mm) pitch, and right-angle through-hole termination. This connector is classified as obsolete, making identification of suitable substitute components essential for ongoing design support and procurement continuity. The part features low insertion force (LIF) operation, tin-plated phosphor bronze contacts, and polyester housing rated for UL94 V-0 flammability compliance.

Key Parameters

Parameter	Value
Manufacturer Part Number	0022153053
Manufacturer	Molex
Category	FFC, FPC (Flat Flexible) Connectors
Number of Positions	5
Pitch	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Termination Type	Solder
Voltage Rating	200V
Current Rating	1A
Operating Temperature Range	-40°C ~ 105°C
Product Status	Obsolete
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of the Molex 0022153053 is based on the following critical parameters that must align between the main part and substitute:

Number of Positions: 5 positions (fixed requirement)
Pitch: 0.100" (2.54mm) (fixed requirement)
Mounting Type: Through Hole, Right Angle (fixed requirement)
Voltage Rating: Minimum 200V (substitute must meet or exceed)
Current Rating: Minimum 1A (substitute must meet or exceed)
Operating Temperature Range: Must encompass -40°C ~ 105°C
Termination Compatibility: Solder or kinked pin termination acceptable for through-hole mounting
Regulatory Compliance: RoHS3 and UL94 V-0 flammability rating required

The TE Connectivity AMP Connectors 5-520314-5 qualifies as a substitute based on these parameters. While the contact orientation differs (top-mounted versus bottom-mounted), both configurations support the same electrical and mechanical interface requirements for 5-position, 2.54mm pitch FFC connectors in right-angle through-hole applications.

Parameter Comparison

Parameter	Molex 0022153053	TE Connectivity 5-520314-5	Compatibility
Number of Positions	5	5	Match
Pitch	0.100" (2.54mm)	0.100" (2.54mm)	Match
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Match
Voltage Rating	200V	250V	Substitute exceeds requirement
Current Rating	1A	1A	Match
Operating Temperature Range	-40°C ~ 105°C	-55°C ~ 105°C	Substitute exceeds requirement
Contact Material	Phosphor Bronze	Phosphor Bronze	Match
Contact Finish	Tin	Tin	Match
Housing Material	Polyester	Polyester Thermoplastic, Glass Filled	Compatible
Flammability Rating	UL94 V-0	UL94 V-0	Match
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	Match
MSL Rating	1 (Unlimited)	1 (Unlimited)	Match
Product Status	Obsolete	Active	Substitute is actively manufactured

Engineering Selection Recommendations

The TE Connectivity AMP Connectors 5-520314-5 is the qualified substitute for the obsolete Molex 0022153053. Selection is supported by the following factors:

Both parts maintain identical electrical specifications (1A at 200V minimum, with the substitute rated to 250V)
Temperature operating ranges are compatible, with the substitute providing extended low-temperature performance (-55°C versus -40°C)
Both parts achieve UL94 V-0 flammability compliance and ROHS3 regulatory status
Mechanical interface parameters (5 positions, 2.54mm pitch, right-angle through-hole mounting) are identical
The substitute part is in active production status, ensuring long-term availability and supply chain continuity
Contact material, finish, and housing material specifications are equivalent or superior

The primary design consideration is the contact orientation difference: the Molex part features bottom-mounted contacts, while the TE Connectivity substitute features top-mounted contacts. This difference requires PCB layout verification to confirm mechanical clearance and mating compatibility with the corresponding FFC cable connector.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 5-520314-5 directly replace the Molex 0022153053 without PCB modification?

A: Direct replacement requires verification of contact orientation compatibility. The Molex part has bottom-mounted contacts, while the TE Connectivity substitute has top-mounted contacts. PCB layout and mating cable connector orientation must be evaluated to confirm mechanical fit.

Q: Are the electrical ratings of the TE Connectivity substitute adequate for the original application?

A: Yes. The substitute meets or exceeds all electrical requirements: 250V voltage rating (versus 200V requirement), 1A current rating (matching requirement), and -55°C to 105°C operating temperature range (exceeding the -40°C to 105°C requirement).

Q: What is the difference between the termination types listed for these parts?

A: The Molex part uses solder termination, while the TE Connectivity substitute uses kinked pin termination. Both are compatible with through-hole PCB mounting. Kinked pin termination provides mechanical retention during soldering and is functionally equivalent for this application category.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the Molex 0022153053 and TE Connectivity 5-520314-5 are ROHS3 compliant and carry UL94 V-0 flammability ratings, meeting current regulatory requirements.

Q: What is the packaging difference between these parts?

A: The Molex part is supplied without specified packaging notation. The TE Connectivity substitute is supplied in tray packaging, which is standard for high-volume connector distribution.

Q: Why is the Molex part listed as obsolete?

A: The Molex 0022153053 has reached end-of-life status. The TE Connectivity 5-520314-5 remains in active production, providing design continuity and supply assurance for new and ongoing applications requiring 5-position, 2.54mm pitch FFC connectors.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message