Molex 0016020102 Rectangular Socket Contact - Equivalent & Substitute Parts

Part Overview

The Molex 0016020102 is an active rectangular connector socket contact designed for 22-24 AWG wire gauges with crimp termination and tin contact finish. This component is part of the SL 70058 series and maintains ROHS3 compliance with unlimited moisture sensitivity rating. Socket contacts of this specification are essential in modular connector assemblies where reliable electrical connections and mechanical retention are required across various industrial and commercial applications. Substitute parts may be necessary due to inventory availability, lead time requirements, or specific application constraints.

Substiute Parts

0016020102

MolexIn Stock: 7840016020102 Datasheet

Current PartRFQ

1-104479-1

TE Connectivity AMP ConnectorsIn Stock: 407051-104479-1 Datasheet

MFR RecommendedRFQ

PS-SF-C1-1-5000

JAE ElectronicsIn Stock: 18947PS-SF-C1-1-5000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for rectangular connector socket contacts is determined by the following critical parameters:

• Contact Type: Socket (all candidates match)
• Termination Method: Crimp (all candidates match)
• Wire Gauge Compatibility: 22-24 AWG primary requirement; 20-24 AWG range acceptable with overlap at 22-24 AWG
• Contact Finish: Tin or gold plating acceptable; gold provides enhanced corrosion resistance
• Compliance Status: ROHS3 compliance required; MSL 1 rating required
• Packaging Format: Bulk or cut tape formats both acceptable for component-level selection

The two identified substitute parts meet these core substitution criteria while maintaining electrical and mechanical compatibility within the rectangular connector socket contact category.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 1-104479-1: This substitute maintains tin contact finish matching the original specification. Wire gauge range extends to 20 AWG, providing broader compatibility within the 22-24 AWG overlap zone. Contact finish thickness is reduced to 100.0µin, which remains within acceptable parameters for rectangular connector socket contacts. ROHS3 compliance and MSL 1 rating are maintained. Bulk packaging format aligns with original specification. Significantly higher inventory availability (40648 pcs) supports supply chain continuity.

JAE Electronics PS-SF-C1-1-5000: This substitute matches the exact wire gauge specification (22-24 AWG) and maintains ROHS3 compliance with MSL 1 rating. Contact finish is upgraded to gold plating, which provides enhanced corrosion resistance and contact reliability compared to tin. Cut tape packaging differs from bulk format but does not affect component-level electrical or mechanical performance. Inventory availability (18931 pcs) supports procurement requirements.

Both substitutes maintain active product status and full regulatory compliance. Selection between them depends on contact finish requirements (tin versus gold) and packaging format preferences.

Frequently Asked Questions (FAQ)

Q: Can TE Connectivity 1-104479-1 be used as a direct substitute despite the 20-24 AWG specification?

A: Yes. The 20-24 AWG range encompasses the original 22-24 AWG specification. The overlap at 22-24 AWG ensures mechanical and electrical compatibility for wire gauges within the original specification range.

Q: What is the significance of contact finish thickness differences between the main part and substitutes?

A: Contact finish thickness affects contact durability and corrosion resistance. The main part specifies 150.0µin (3.81µm) tin finish. TE Connectivity 1-104479-1 provides 100.0µin (2.54µm) tin finish, which remains adequate for rectangular connector socket contact applications. JAE Electronics PS-SF-C1-1-5000 uses gold finish, which inherently provides superior corrosion resistance regardless of thickness specification.

Q: Does packaging format (bulk versus cut tape) affect component compatibility?

A: No. Packaging format affects handling, storage, and assembly processes but does not alter electrical or mechanical performance of the socket contact component itself.

Q: Are all three parts ROHS3 compliant?

A: Yes. All three parts maintain ROHS3 compliance and MSL 1 (unlimited) moisture sensitivity rating, meeting regulatory requirements for equivalent substitution.

Q: Which substitute offers the best long-term reliability?

A: JAE Electronics PS-SF-C1-1-5000 with gold contact finish provides enhanced corrosion resistance and contact reliability over extended service life compared to tin-plated alternatives.