Molex 0015916147 Equivalent & Substitute Parts

Part Overview

The Molex 0015916147 is a surface mount rectangular connector header with 14 positions arranged in 2 rows at 0.100" (2.54mm) pitch. This C-Grid 71308 series component is classified as an active product and serves as a board-to-board interface in applications spanning automotive, general purpose, lighting, medical, and telecommunications sectors. The connector features male pins with gold-plated mating contacts, solder termination, and push-pull fastening. Equivalent and substitute parts are identified to address inventory availability, packaging requirements, and specific application constraints while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Connector Type	Header, Breakaway
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	14
Number of Rows	2
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Surface Mount
Termination	Solder
Fastening Type	Push-Pull
Contact Shape	Square
Insulation Material	Liquid Crystal Polymer (LCP), Glass Filled
Material Flammability Rating	UL94 V-0
Insulation Color	Black
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the Molex 0015916147 is determined by strict adherence to the following critical parameters:

Pitch and Position Configuration: All substitute parts maintain 0.100" (2.54mm) mating pitch with 14 positions in 2 rows and 0.100" row spacing
Connector Type and Contact Configuration: All substitutes are header connectors with male pins, push-pull fastening, and breakaway capability
Mounting and Termination: Surface mount with solder termination is maintained across all alternatives
Contact Geometry: Square contact shape is preserved
Compliance and Safety: All substitutes meet UL94 V-0 flammability rating and RoHS3 compliance requirements
Moisture Sensitivity: MSL 1 (Unlimited) rating is consistent across all parts

The Amphenol ICC (FCI) BERGSTIK® series parts (95278 base number) are direct functional equivalents. Variations exist in packaging format (Tape & Reel versus Bulk), contact material (Phosphor Bronze versus Copper Alloy), contact finish specifications, and insulation material (Thermoplastic versus LCP Glass Filled). These variations do not affect electrical or mechanical compatibility in board-to-board applications.

Parameter Comparison

Parameter	Molex 0015916147	95278-101-14LF	95278-101A14LF	95278-401A14LF	95278-801-14LF	95278-801A14LF
Manufacturer	Molex	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)
Series	C-Grid 71308	BERGSTIK®	BERGSTIK®	BERGSTIK®	BERGSTIK®	BERGSTIK®
Packaging	Tape & Reel (TR)	Bulk	Tape & Reel (TR)	Tape & Reel (TR)	Bulk	Tape & Reel (TR)
Connector Type	Header, Breakaway	Header, Breakaway	Header	Header, Breakaway	Header, Breakaway	Header, Breakaway
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	14	14	14	14	14	14
Number of Rows	2	2	2	2	2	2
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Termination	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Contact Length - Mating	0.240" (6.10mm)	0.232" (5.90mm)	0.232" (5.90mm)	0.232" (5.90mm)	0.232" (5.90mm)	0.232" (5.90mm)
Insulation Height	0.090" (2.29mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Contact Shape	Square	Square	Square	Square	Square	Square
Contact Finish - Mating	Gold	Gold, GXT™	Gold, GXT™	Tin	Gold, GXT™	Gold, GXT™
Contact Finish Thickness - Mating	30.0µin (0.76µm)	30.0µin (0.76µm)	30.0µin (0.76µm)	78.7µin (2.00µm)	15.0µin (0.38µm)	15.0µin (0.38µm)
Contact Material	Copper Alloy	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Insulation Material	Liquid Crystal Polymer (LCP), Glass Filled	Thermoplastic	Thermoplastic	Thermoplastic	Thermoplastic	Thermoplastic
Operating Temperature	Not specified	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C
Current Rating (Amps)	Not specified	3A per Contact	3A per Contact	3A per Contact	3A per Contact	3A per Contact
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Insulation Color	Black	Black	Black	Black	Black	Black
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
REACH Status	REACH Unaffected	REACH Unaffected	REACH Affected	REACH Affected	REACH Affected	REACH Affected
Product Status	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All substitute parts maintain active product status and meet UL94 V-0 flammability requirements. The primary selection criteria are based on packaging format and compliance documentation requirements.

For Tape & Reel packaging with ROHS3 compliance: 95278-101A14LF is the preferred substitute, offering the highest inventory availability (2188 pcs) and explicit ROHS3 certification matching the original part specification.

For Bulk packaging with standard RoHS compliance: 95278-101-14LF and 95278-801-14LF are suitable alternatives with higher inventory levels (1360 pcs and 2961 pcs respectively). These parts carry RoHS compliance but not the ROHS3 designation.

For applications requiring tin-plated mating contacts: 95278-401A14LF provides an alternative contact finish specification while maintaining all other electrical and mechanical parameters.

For reduced gold plating thickness: 95278-801-14LF and 95278-801A14LF offer 15.0µin (0.38µm) gold plating on mating contacts compared to the standard 30.0µin (0.76µm) specification.

All Amphenol ICC (FCI) BERGSTIK® substitutes provide documented operating temperature range (-65°C ~ 125°C) and current rating (3A per contact) specifications not explicitly stated for the original Molex part.

Frequently Asked Questions (FAQ)

Q: Are the Amphenol ICC (FCI) BERGSTIK® parts electrically compatible with the Molex 0015916147?

A: Yes. All substitute parts maintain identical mating pitch (0.100" / 2.54mm), position count (14), row configuration (2 rows), contact type (male pin), and fastening mechanism (push-pull). Electrical compatibility is established through these core parameters.

Q: What is the difference between Tape & Reel and Bulk packaging options?

A: Tape & Reel packaging is designed for automated pick-and-place assembly processes and includes moisture barrier protection. Bulk packaging is suitable for manual assembly or lower-volume applications. Both packaging formats contain identical connector components.

Q: Why do some substitute parts have different contact material specifications?

A: The original Molex part uses Copper Alloy contacts, while Amphenol ICC (FCI) BERGSTIK® substitutes use Phosphor Bronze. Both materials are suitable for the specified applications and maintain equivalent electrical performance. Contact material does not affect mechanical or electrical compatibility in board-to-board connector applications.

Q: What is the significance of the contact finish thickness variations?

A: Contact finish thickness (gold plating) affects durability and wear resistance in mating cycles. The original part specifies 30.0µin (0.76µm) gold plating. Substitutes with 15.0µin (0.38µm) or 78.7µin (2.00µm) plating provide alternative durability profiles. All thicknesses meet functional requirements for the specified applications.

Q: Are there differences in insulation material between the original and substitute parts?

A: Yes. The Molex 0015916147 uses Liquid Crystal Polymer (LCP) Glass Filled insulation, while Amphenol ICC (FCI) BERGSTIK® substitutes use Thermoplastic insulation. Both materials meet UL94 V-0 flammability requirements and are suitable for the specified applications. Insulation material does not affect electrical or mechanical compatibility.

Q: What is the difference between ROHS3 and standard RoHS compliance?

A: ROHS3 refers to the third iteration of RoHS (Restriction of Hazardous Substances) regulations with updated substance restrictions. Standard RoHS compliance indicates adherence to earlier RoHS directives. Both certifications restrict hazardous substances; ROHS3 represents the current regulatory standard. The original Molex part carries ROHS3 certification; most Amphenol ICC (FCI) substitutes carry standard RoHS certification.

Q: Can the 95278-101A14LF substitute be used as a direct replacement in existing designs?

A: Yes. The 95278-101A14LF maintains all critical electrical and mechanical parameters required for board-to-board connector applications. Minor dimensional variations (insulation height 0.100" versus 0.090", contact length 0.232" versus 0.240") do not affect functional compatibility in standard PCB layouts.

Q: What is the inventory status of these substitute parts?

A: All substitute parts are listed as active products with current inventory availability: 95278-101-14LF (1360 pcs), 95278-101A14LF (2188 pcs), 95278-401A14LF (1336 pcs), 95278-801-14LF (2961 pcs), and 95278-801A14LF (1472 pcs).

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message