Molex 0015911322 Equivalent & Substitute Parts

Part Overview

The Molex 0015911322 is a surface mount rectangular connector header with 32 positions at 2.54mm pitch, configured as a 2-row breakaway header for board-to-board or cable applications. This connector is classified as Active product status and is RoHS3 compliant with UL94 V-0 flammability rating. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in applications where the primary part is unavailable or procurement constraints exist.

Substiute Parts

0015911322

MolexIn Stock: 8710015911322 Datasheet

Current PartRFQ

95278-101-32LF

Amphenol ICC (FCI)In Stock: 139495278-101-32LF Datasheet

MFR RecommendedRFQ

GBC16DABN-M30

Sullins Connector SolutionsIn Stock: 1337GBC16DABN-M30 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0015911322 is determined by strict alignment of the following parameters:

• Connector Type: Header, Breakaway
• Contact Type: Male Pin
• Pitch - Mating: 0.100" (2.54mm)
• Number of Positions: 32
• Number of Rows: 2
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Surface Mount
• Termination: Solder
• Fastening Type: Push-Pull
• Contact Shape: Square
• Material Flammability Rating: UL94 V-0
• Moisture Sensitivity Level: 1 (Unlimited)

The identified substitute parts meet all critical electrical and mechanical parameters. Variations in contact length, insulation height, contact finish thickness, and insulation material composition do not preclude substitution when the above parameters are matched. Both substitute parts maintain Active product status and comply with applicable regulatory requirements.

Parameter Comparison

Engineering Selection Recommendations

All three connector headers maintain Active product status and satisfy UL94 V-0 flammability requirements with MSL 1 classification. The Molex 0015911322 is ROHS3 compliant. The Amphenol ICC 95278-101-32LF is RoHS compliant with REACH Affected status. The Sullins GBC16DABN-M30 is ROHS3 compliant with REACH Unaffected status.

Selection between the main part and substitutes should be based on availability, supply chain requirements, and regulatory compliance obligations specific to the end application. All three parts are electrically and mechanically equivalent for board-to-board or cable connection applications requiring 32-position 2.54mm pitch headers with surface mount solder termination.

Frequently Asked Questions (FAQ)

Q: What are the critical parameters that determine if a part can substitute for the Molex 0015911322?

A: The critical parameters are connector type (Header, Breakaway), contact type (Male Pin), pitch (0.100" / 2.54mm), position count (32), row configuration (2 rows), row spacing (0.100" / 2.54mm), mounting type (Surface Mount), termination (Solder), fastening type (Push-Pull), contact shape (Square), flammability rating (UL94 V-0), and MSL classification (1). All substitute parts match these specifications.

Q: Are there differences in contact material between the main part and substitutes?

A: Yes. The Molex 0015911322 uses Copper Alloy contacts, while both substitute parts use Phosphor Bronze contacts. This material difference does not affect substitution eligibility as both materials are suitable for the specified electrical and mechanical requirements.

Q: What is the difference in insulation material between these connectors?

A: The Molex 0015911322 uses Liquid Crystal Polymer (LCP) Glass Filled insulation. The Amphenol ICC 95278-101-32LF uses Thermoplastic insulation, and the Sullins GBC16DABN-M30 uses Polyamide (PA9T) Nylon 9T insulation. All materials meet UL94 V-0 flammability requirements and do not prevent substitution.

Q: What are the operating temperature ranges for these parts?

A: The Molex 0015911322 does not specify an operating temperature range in the provided data. The Amphenol ICC 95278-101-32LF operates from -65°C to 125°C. The Sullins GBC16DABN-M30 operates from -65°C to 150°C. Verify application temperature requirements against the selected part's operating range.

Q: Are there packaging differences between these parts?

A: Yes. The Molex 0015911322 is supplied in Tube packaging, while both substitute parts are supplied in Bulk packaging. Packaging format does not affect electrical or mechanical compatibility.

Q: What is the difference in contact finish thickness?

A: The Molex 0015911322 specifies 15.0µin (0.38µm) gold finish thickness on mating contacts. The Amphenol ICC 95278-101-32LF specifies 30.0µin (0.76µm), and the Sullins GBC16DABN-M30 specifies 10.0µin (0.25µm). These variations do not preclude substitution as all meet contact durability and conductivity requirements.

Q: What is the REACH compliance status of each part?

A: The Molex 0015911322 is REACH Unaffected. The Amphenol ICC 95278-101-32LF is REACH Affected. The Sullins GBC16DABN-M30 is REACH Unaffected. Verify REACH compliance requirements for your specific application and end market.