Molex 0015910307 Equivalent & Substitute Parts

Part Overview

The Molex 0015910307 is a surface mount rectangular connector header with 30 positions at 2.54mm pitch, configured as a 2-row breakaway header for board-to-board or cable applications. This connector is classified as Active product status and is ROHS3 compliant with UL94 V-0 flammability rating. Finding equivalent substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and maintain compatibility across manufacturing batches and procurement cycles.

Substiute Parts

0015910307

MolexIn Stock: 8320015910307 Datasheet

Current PartRFQ

2-146134-1

TE Connectivity AMP ConnectorsIn Stock: 13592-146134-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Molex 0015910307 is determined by strict equivalence across the following critical parameters:

• Connector Type: Header, Breakaway configuration
• Contact Type: Male Pin
• Pitch - Mating: 0.100" (2.54mm)
• Number of Positions: 30
• Number of Rows: 2
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Surface Mount
• Termination: Solder
• Fastening Type: Push-Pull
• Insulation Material: Liquid Crystal Polymer (LCP)
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The TE Connectivity AMP Connectors part number 2-146134-1 meets all critical substitution criteria and is classified as an MFR Recommended substitute.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity AMP Connectors 2-146134-1 is a direct functional equivalent to the Molex 0015910307. Both parts maintain Active product status and are ROHS3 compliant with UL94 V-0 flammability certification. The substitute part carries identical electrical and mechanical specifications across all critical mating and mounting parameters. Selection between these parts may be based on supply availability, procurement lead times, or established vendor relationships, as both parts satisfy identical compliance and certification requirements.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 2-146134-1 be used as a direct replacement for the Molex 0015910307?

A: Yes. Both parts share identical connector type, contact configuration, pitch, position count, row spacing, mounting type, termination method, and fastening mechanism. The 30-position 2-row 2.54mm pitch header configuration is mechanically and electrically interchangeable.

Q: Are there differences in contact finish between these parts?

A: The Molex 0015910307 features gold mating contact finish at 15.0µin thickness, while the TE Connectivity 2-146134-1 uses tin mating contact finish at 100.0µin thickness. Both parts use tin post finish. The difference in mating contact finish does not affect mechanical compatibility but may influence corrosion resistance characteristics in specific environmental applications.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, carry UL94 V-0 flammability rating, are REACH unaffected, and share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Q: What is the difference in insulation material composition?

A: The Molex part uses Liquid Crystal Polymer (LCP) with glass fill, while the TE Connectivity part uses LCP without specified glass fill. Both materials provide UL94 V-0 flammability performance and are suitable for surface mount header applications.

Q: Are the operating temperature ranges specified for both parts?

A: Operating temperature is not specified for the Molex 0015910307. The TE Connectivity 2-146134-1 operates from -65°C to 125°C. Verify thermal requirements against your specific application before selection.

Q: What are the current and voltage ratings?

A: Current and voltage ratings are not specified for the Molex 0015910307. The TE Connectivity 2-146134-1 is rated for 3A at 30VAC. Confirm electrical requirements against your circuit design specifications.