Molex 0015445110 Equivalent & Substitute Parts

Part Overview

The Molex 0015445110 is a 10-position receptacle connector with 0.100" (2.54mm) pitch, designed for through-hole PCB mounting with solder termination. This connector features gold-plated mating contacts and tin-plated posts, operating across -40°C to 125°C with a 2.5A current rating at 500VAC. The part is Active status and RoHS3 compliant, making it suitable for automotive, medical, telecommunications, and general-purpose applications. Equivalent parts are identified to provide alternatives for procurement flexibility, inventory management, or application-specific requirements.

Key Parameters

Parameter	Value
Connector Type	Receptacle
Contact Type	Female Socket
Number of Positions	10
Pitch - Mating	0.100" (2.54mm)
Number of Rows	2
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Contact Finish - Mating	Gold
Current Rating	2.5A
Voltage Rating	500VAC
Operating Temperature	-40°C ~ 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS3 Compliant

Substitute Part Grouping Explanation

The TE Connectivity AMP Connectors 5-534206-5 qualifies as an equivalent substitute based on the following critical parameters:

Matching parameters: 10-position receptacle connector, 0.100" (2.54mm) mating pitch, 2-row configuration with 0.100" row spacing, through-hole solder termination, push-pull fastening, female socket contacts, gold-plated mating contacts, square contact geometry, phosphor bronze contact material, UL94 V-0 flammability rating, and RoHS compliance.

Allowable variations within substitution criteria: Insulation height (0.320" vs 0.340"), contact post length (0.115" vs 0.120"), contact finish thickness on posts (150.0µin vs 74.8µin), insulation material composition (polyester glass-filled vs liquid crystal polymer glass-filled), operating temperature range (-65°C to 125°C vs -40°C to 125°C), and current rating (2A vs 2.5A).

Parameter Comparison

Parameter	Molex 0015445110	TE Connectivity 5-534206-5
Manufacturer	Molex	TE Connectivity AMP Connectors
Series	C-Grid 71850	AMPMODU Mod II
Connector Type	Receptacle	Receptacle
Number of Positions	10	10
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)
Number of Rows	2	2
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole
Termination	Solder	Solder
Fastening Type	Push-Pull	Push-Pull
Contact Type	Female Socket	Female Socket
Contact Finish - Mating	Gold	Gold
Contact Finish Thickness - Mating	30.0µin (0.76µm)	30.0µin (0.76µm)
Contact Shape	Square	Square
Contact Material	Phosphor Bronze	Phosphor Bronze
Contact Finish - Post	Tin	Tin
Insulation Height	0.340" (8.64mm)	0.320" (8.13mm)
Contact Length - Post	0.120" (3.05mm)	0.115" (2.92mm)
Contact Finish Thickness - Post	74.8µin (1.90µm)	150.0µin (3.81µm)
Operating Temperature	-40°C ~ 125°C	-65°C ~ 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0
Current Rating	2.5A	2A
RoHS Status	RoHS3 Compliant	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)
ECCN	EAR99	EAR99
HTSUS	8536.69.4040	8536.69.4040

Engineering Selection Recommendations

Both the Molex 0015445110 and TE Connectivity 5-534206-5 are Active status products with equivalent electrical and mechanical compatibility for 10-position, 0.100" pitch through-hole receptacle applications. Selection between these parts should be based on:

Availability and lead time requirements, as the TE Connectivity part shows higher inventory (2200 pcs vs 963 pcs).

Current rating tolerance: The Molex part is rated at 2.5A while the TE Connectivity part is rated at 2A. Applications requiring the full 2.5A rating must use the Molex 0015445110.

Operating temperature range: The TE Connectivity part extends to -65°C, providing broader low-temperature capability compared to the Molex part at -40°C minimum.

Packaging format: Molex is supplied in trays; TE Connectivity is supplied in tubes. Packaging preference may influence procurement decisions.

Both parts maintain RoHS compliance and UL94 V-0 flammability ratings suitable for automotive, medical, and telecommunications applications.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 5-534206-5 be used as a direct replacement for the Molex 0015445110 in all applications?

A: The TE Connectivity part is mechanically and electrically compatible for most applications. However, if your circuit requires the full 2.5A current rating, the Molex part must be used, as the TE Connectivity substitute is rated at 2A maximum.

Q: What are the dimensional differences between these connectors?

A: The insulation height differs by 0.020" (0.51mm), with the Molex part at 0.340" and the TE Connectivity part at 0.320". Contact post length varies by 0.005" (0.13mm). These differences are within typical PCB layout tolerances for standard through-hole applications.

Q: Are both parts suitable for automotive applications?

A: Yes, both parts are listed for automotive applications and maintain UL94 V-0 flammability ratings and RoHS compliance required for automotive use.

Q: What is the difference in contact finish thickness on the posts?

A: The TE Connectivity part has thicker tin plating on the posts (150.0µin vs 74.8µin). Both thicknesses provide adequate corrosion protection for solder termination and long-term reliability.

Q: Which part should I choose for low-temperature environments?

A: The TE Connectivity 5-534206-5 operates to -65°C, compared to -40°C for the Molex part. For applications below -40°C, the TE Connectivity part is the appropriate choice.

Q: Are there packaging considerations when switching between these parts?

A: The Molex part is supplied in trays while the TE Connectivity part is supplied in tubes. Verify that your assembly process can accommodate the alternate packaging format.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message