Molex 0015418016 Equivalent & Substitute Parts

Part Overview

The Molex 0015418016 is a rectangular connector header designed for through-hole, right-angle board-to-board or cable applications. This 16-position connector operates at a 0.100" (2.54mm) pitch with shrouded 4-wall construction and solder termination. The part is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing design support and procurement planning.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	16
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Contact Finish - Mating	Gold
Contact Material	Phosphor Bronze
Insulation Material	Polyamide (PA), Nylon, Glass Filled
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0015418016 is determined by strict alignment of the following critical parameters:

Connector configuration: 16-position, 2-row header with 0.100" (2.54mm) pitch and row spacing
Mounting and orientation: Through-hole, right-angle mounting
Shrouding design: Shrouded 4-wall construction
Contact system: Male pins with gold-plated mating surfaces and phosphor bronze material
Termination method: Solder termination
Compliance standards: UL94 V-0 flammability rating and ROHS3 compliance

The TE Connectivity AMP Connectors 5-102570-6 meets all critical substitution criteria. Both connectors share identical pitch, position count, row configuration, mounting type, shrouding, contact type, and termination method. Both achieve UL94 V-0 and ROHS3 compliance. Minor variations in contact dimensions and insulation material do not affect functional interchangeability in standard through-hole applications.

Parameter Comparison

Parameter	Molex 0015418016	TE Connectivity 5-102570-6
Connector Type	Header	Header
Contact Type	Male Pin	Male Pin
Number of Positions	16	16
Number of Rows	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder
Contact Finish - Mating	Gold	Gold
Contact Material	Phosphor Bronze	Phosphor Bronze
Material Flammability Rating	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)
Contact Length - Mating	0.315" (8.00mm)	0.318" (8.08mm)
Contact Length - Post	0.130" (3.30mm)	0.135" (3.43mm)
Insulation Height	0.420" (10.67mm)	0.400" (10.16mm)
Operating Temperature	Not specified	-65°C ~ 105°C
Current Rating	Not specified	3A

Engineering Selection Recommendations

The TE Connectivity AMP Connectors 5-102570-6 is a direct functional substitute for the obsolete Molex 0015418016. Both connectors satisfy identical electrical and mechanical interface requirements for 16-position, 2-row through-hole applications at 0.100" pitch.

Selection of the TE Connectivity alternative is supported by:

Matching connector geometry, pitch, and row spacing
Identical shrouding configuration and contact system
Equivalent compliance certifications (UL94 V-0, ROHS3)
Equivalent moisture sensitivity rating (MSL 1)
Established availability in current inventory

The TE Connectivity part is currently discontinued at DiGi Electronics but maintains 1104 units in new original stock. Minor dimensional variations in contact length and insulation height fall within standard manufacturing tolerances and do not affect PCB footprint compatibility or mating performance in standard applications.

Frequently Asked Questions (FAQ)

Q: Are the Molex 0015418016 and TE Connectivity 5-102570-6 mechanically interchangeable?

A: Yes. Both connectors share identical pitch (0.100"), position count (16), row configuration (2 rows), mounting type (through-hole right-angle), and shrouding design (4-wall). PCB footprints are compatible. Minor variations in contact length and insulation height do not affect standard board-to-board or cable applications.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is based on matching connector type, contact type, position count, row configuration, pitch, row spacing, mounting orientation, shrouding design, termination method, contact material, and compliance ratings. All these parameters are identical between the two parts.

Q: Does the TE Connectivity part meet the same compliance standards?

A: Yes. Both parts are UL94 V-0 rated, ROHS3 compliant, and carry MSL 1 (Unlimited) moisture sensitivity ratings. Both use phosphor bronze contacts with gold plating on mating surfaces.

Q: What is the difference in operating temperature specifications?

A: The Molex 0015418016 does not specify an operating temperature range. The TE Connectivity 5-102570-6 specifies -65°C ~ 105°C. This TE Connectivity specification does not restrict substitution; it provides additional documented performance data.

Q: Are there differences in contact dimensions?

A: Minor differences exist: mating contact length is 0.315" (Molex) versus 0.318" (TE), and post contact length is 0.130" (Molex) versus 0.135" (TE). Insulation height is 0.420" (Molex) versus 0.400" (TE). These variations are within standard manufacturing tolerances and do not affect functional compatibility.

Q: What is the current rating for these connectors?

A: The Molex 0015418016 does not specify a current rating. The TE Connectivity 5-102570-6 specifies 3A. For applications requiring current rating verification, consult detailed datasheets or contact the manufacturers directly.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message