Equivalent & Substitute Parts for Molex 0015418014

Part Overview

The Molex 0015418014 is a rectangular connector header featuring a right-angle, through-hole design with 14 positions arranged in 2 rows at 0.100" (2.54mm) pitch. This connector is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support, maintenance, and new design implementations where legacy compatibility is required.

Substiute Parts

0015418014

MolexIn Stock: 7600015418014 Datasheet

Current PartRFQ

5-103167-4

TE Connectivity AMP ConnectorsIn Stock: 11265-103167-4 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Molex 0015418014 is determined by strict equivalence across the following critical parameters:

• Connector Configuration: 14-position, 2-row header with 0.100" (2.54mm) mating pitch and 0.100" (2.54mm) row spacing
• Mechanical Interface: Through-hole, right-angle mounting with shrouded 4-wall design and detent lock fastening
• Electrical Interface: Male pin contacts with solder termination, phosphor bronze material, gold-plated mating surfaces, and tin-plated posts
• Compliance: UL94 V-0 flammability rating, ROHS3 compliance, and MSL 1 moisture sensitivity level

The substitute part TE Connectivity AMP Connectors 5-103167-4 satisfies all critical parameters within acceptable engineering tolerances for direct substitution.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity AMP Connectors 5-103167-4 is the direct functional equivalent for the obsolete Molex 0015418014. Selection is supported by the following factors:

• Mechanical Compatibility: Identical connector configuration, pitch spacing, mounting orientation, and shrouding design ensure direct board-level substitution without layout modifications.
• Electrical Compatibility: Matching contact materials, finishes, and termination methods provide equivalent electrical performance and signal integrity.
• Compliance Alignment: Both parts maintain UL94 V-0 flammability certification, ROHS3 compliance, and MSL 1 moisture sensitivity classification, satisfying regulatory and environmental requirements.
• Active Product Status: The TE Connectivity part is currently in active production, ensuring long-term availability and supply chain continuity compared to the obsolete Molex alternative.
• Minor Dimensional Variations: Contact length and insulation height differences fall within acceptable mechanical tolerances for standard board-to-board or cable interconnect applications.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 5-103167-4 be used as a direct replacement for the Molex 0015418014 without PCB redesign?

A: Yes. Both connectors share identical mating pitch (0.100"), row spacing (0.100"), position count (14 in 2 rows), mounting type (through-hole right-angle), and shrouding configuration (4-wall). Direct substitution on existing PCB layouts is supported.

Q: What are the key differences between these two connector models?

A: The primary differences are product status (Molex is obsolete; TE Connectivity is active), insulation material composition (Molex uses glass-filled polyamide; TE Connectivity uses thermoplastic), and minor dimensional variations in contact length and insulation height. These differences do not affect functional compatibility.

Q: Are there any thermal or electrical performance differences?

A: The TE Connectivity part specifies an operating temperature range of -65°C to 105°C and a current rating of 3A. The Molex part does not provide these specifications. For applications requiring confirmed thermal or current performance data, the TE Connectivity specifications should be referenced.

Q: Does the higher tin plating thickness on the TE Connectivity part affect compatibility?

A: No. The TE Connectivity part features 100.0µin (2.54µm) tin plating on posts compared to 74.8µin (1.90µm) on the Molex part. This increased thickness provides enhanced corrosion resistance and solder joint durability without affecting mechanical or electrical compatibility.

Q: Are both parts RoHS compliant?

A: Yes. Both the Molex 0015418014 and TE Connectivity 5-103167-4 are ROHS3 compliant and carry MSL 1 moisture sensitivity classification, meeting current environmental and regulatory standards.

Q: What packaging format is the TE Connectivity substitute supplied in?

A: The TE Connectivity 5-103167-4 is supplied in tray packaging, suitable for automated assembly and component handling processes.