Molex 0015296016 Equivalent & Substitute Parts

Part Overview

The Molex 0015296016 is a rectangular connector header designed for through-hole mounting with 16 positions arranged in 2 rows at 0.100" (2.54mm) pitch. This connector is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and new design implementations. The shrouded 4-wall design with detent lock fastening provides mechanical stability in board-to-cable applications across automotive, medical, telecommunications, and general-purpose industries.

Substiute Parts

0015296016

MolexIn Stock: 7700015296016 Datasheet

Current PartRFQ

87690-4

TE Connectivity AMP ConnectorsIn Stock: 85487690-4 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Molex 0015296016 is determined by strict equivalence across the following critical parameters:

• Connector Configuration: 16-position, 2-row header with 0.100" (2.54mm) mating pitch and 0.100" (2.54mm) row spacing
• Mechanical Interface: Through-hole solder termination with shrouded 4-wall design and detent lock fastening
• Contact Specifications: Male pin contacts with square shape and phosphor bronze material
• Electrical Compliance: RoHS and REACH compliance status
• Environmental Classification: Moisture Sensitivity Level 1

The TE Connectivity AMP Connectors part number 87690-4 meets all these criteria, establishing it as a direct functional equivalent despite differences in insulation material composition and contact finish specifications.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity AMP Connectors 87690-4 is a direct substitute for the obsolete Molex 0015296016. Both connectors share identical mating pitch, row spacing, position count, shrouding configuration, and fastening mechanism. The substitute maintains equivalent RoHS and REACH compliance status, ensuring regulatory continuity.

Material variations exist in insulation composition (polyamide versus polyester) and post-side contact finish (gold versus tin). These variations do not affect functional compatibility in standard through-hole solder applications. The TE Connectivity part is currently in active production status with confirmed inventory availability, providing supply chain continuity for applications previously using the Molex connector.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 87690-4 be used as a direct replacement in existing PCB designs?

A: Yes. The 87690-4 maintains identical mating pitch (0.100"), row spacing (0.100"), position count (16), and through-hole footprint geometry. PCB layouts designed for the Molex 0015296016 require no modification.

Q: What is the significance of the contact finish difference (tin versus gold)?

A: Both finishes provide adequate corrosion resistance for solder termination. The gold finish on the TE Connectivity part offers enhanced durability in high-humidity or corrosive environments. For standard applications, both finishes perform equivalently.

Q: Does the insulation material change affect electrical performance?

A: No. Both polyester and polyamide insulation materials meet the same flammability rating (UL94 V-0) and moisture sensitivity classification (MSL 1). Electrical performance characteristics remain equivalent.

Q: Are there packaging differences between these connectors?

A: The Molex part is supplied without specified packaging, while the TE Connectivity 87690-4 is supplied in trays. This affects handling and storage procedures but does not impact connector functionality.

Q: What is the inventory status for the substitute part?

A: The TE Connectivity 87690-4 is in active production with 802 pieces currently in stock, providing immediate availability for new designs and replacement applications.