Molex 0014562128 Equivalent & Substitute Parts

Part Overview

The Molex 0014562128 is a 12-position rectangular receptacle connector with IDC (Insulation Displacement Contact) termination, designed for discrete or ribbon cable applications. This connector features gold-plated contacts, a 0.100" pitch, and latch lock fastening, making it suitable for inline cable termination in industrial and commercial applications. The part is currently active in production with 998 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required due to inventory constraints, design flexibility, or supply chain considerations.

Substiute Parts

0014562128

MolexIn Stock: 11000014562128 Datasheet

Current PartRFQ

6-103958-1

TE Connectivity AMP ConnectorsIn Stock: 22246-103958-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The TE Connectivity AMP Connectors 6-103958-1 qualifies as a direct substitute based on the following critical parameters:

• Connector Configuration: Both parts are 12-position receptacle connectors with identical 0.100" (2.54mm) pitch and female socket contacts
• Termination Method: Both utilize IDC cable termination for discrete or ribbon cable applications
• Fastening & Mounting: Both employ latch lock fastening and free hanging in-line mounting
• Contact Finish: Both feature gold-plated contacts with 30.0µin (0.76µm) thickness
• Electrical Compatibility: Both support closed-end configurations with identical contact geometry
• Compliance: Both are RoHS compliant and rated MSL 1 (Unlimited moisture sensitivity level)

The primary difference is wire gauge accommodation: the Molex part specifies 24 AWG, while the TE Connectivity substitute accepts 22-26 AWG, providing broader wire gauge compatibility within the IDC termination range.

Parameter Comparison

Engineering Selection Recommendations

Both the Molex 0014562128 and TE Connectivity 6-103958-1 are active production parts with full RoHS compliance and unlimited moisture sensitivity ratings. Selection between these parts should be based on:

• Wire Gauge Requirements: If your application uses 24 AWG wire exclusively, either part is suitable. If wire gauge flexibility between 22-26 AWG is required, the TE Connectivity substitute provides broader accommodation.
• Supply Chain Availability: The TE Connectivity part has higher current inventory (2168 units) compared to the Molex part (998 units), making it preferable for high-volume procurement.
• Connector Series Consistency: The Molex part belongs to the SL 70400 series, while the TE Connectivity part belongs to the AMPMODU MTE series. Verify that your application does not require series-specific compatibility with mating connectors or accessories.
• Compliance Verification: Both parts meet RoHS requirements. The Molex part is ROHS3 compliant, while the TE Connectivity part is RoHS compliant. Confirm your application's specific compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 6-103958-1 directly replace the Molex 0014562128 in existing designs?

A: Yes, provided that the mating connector is compatible with the AMPMODU MTE series. Both receptacles share identical pitch (0.100"), position count (12), contact geometry, and IDC termination method. Verify mating connector compatibility before implementation.

Q: What is the significance of the wire gauge difference (24 AWG vs. 22-26 AWG)?

A: The Molex part is specified for 24 AWG wire, while the TE Connectivity substitute accommodates 22-26 AWG. This means the TE Connectivity part can terminate wires ranging from 22 to 26 AWG, including 24 AWG. If your application uses only 24 AWG wire, both parts are functionally equivalent.

Q: Are these connectors suitable for ribbon cable applications?

A: Yes. Both parts support discrete or ribbon cable termination via IDC (Insulation Displacement Contact) technology. The closed-end configuration and latch lock fastening ensure secure cable retention.

Q: What does "Closed End" mean in the Features specification?

A: Closed End indicates that the connector housing has a sealed end, preventing accidental contact exposure and providing mechanical protection for the IDC termination area.

Q: Are there any differences in RoHS compliance between these parts?

A: Both parts are RoHS compliant. The Molex part is specifically ROHS3 compliant, while the TE Connectivity part is RoHS compliant. Both meet environmental and hazardous substance restrictions. Confirm your application's specific RoHS version requirement if necessary.

Q: What is the MSL (Moisture Sensitivity Level) rating, and why does it matter?

A: Both parts are rated MSL 1 (Unlimited), meaning they have no moisture sensitivity restrictions and do not require special storage or handling conditions. This simplifies inventory management and deployment.

Q: Can these connectors be used interchangeably with other 12-position 0.100" pitch connectors?

A: Only if the mating connector is compatible with either the SL 70400 series (Molex) or AMPMODU MTE series (TE Connectivity). Different connector series may have incompatible contact geometries or housing designs. Always verify mating connector compatibility.