Molex 0010897280 Equivalent & Substitute Parts

Part Overview

The Molex 0010897280 is a vertical rectangular connector header with 28 positions at 2.54mm pitch, designed for through-hole board-to-board or cable applications. This connector features a breakaway design with unshrouded construction and is classified as Active product status. Substitute parts are necessary to address supply chain flexibility, regional availability, or specific application requirements while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Connector Type	Header, Breakaway
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	28
Number of Rows	2
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Contact Shape	Square
Shrouding	Unshrouded
Material Flammability Rating	UL94 V-0
Insulation Color	Black
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the Molex 0010897280 are qualified based on strict electrical and mechanical parameter alignment. All substitute parts maintain the following critical parameters:

Connector Type: Header, Breakaway
Contact Type: Male Pin
Pitch - Mating: 0.100" (2.54mm)
Number of Positions: 28
Number of Rows: 2
Row Spacing - Mating: 0.100" (2.54mm)
Mounting Type: Through Hole
Termination: Solder
Fastening Type: Push-Pull
Contact Shape: Square
Shrouding: Unshrouded
Material Flammability Rating: UL94 V-0
Insulation Color: Black

Variations in contact length, insulation height, contact material composition, and contact finish specifications are permitted within the substitute group, as these parameters do not affect mating compatibility or board-level integration when the core dimensional and electrical characteristics remain constant.

Parameter Comparison

Parameter	Molex 0010897280	Amphenol ICC 77313-801-28LF	Sullins PBC14DAAN	Sullins PEC14DAAN	Sullins PEC14DACN
Manufacturer	Molex	Amphenol ICC (FCI)	Sullins Connector Solutions	Sullins Connector Solutions	Sullins Connector Solutions
Series	C-Grid 70280	BERGSTIK®	-	-	-
Connector Type	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header, Breakaway
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	28	28	28	28	28
Number of Rows	2	2	2	2	2
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Contact Length - Mating	0.240" (6.10mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)
Contact Length - Post	0.107" (2.71mm)	0.095" (2.41mm)	0.120" (3.05mm)	0.120" (3.05mm)	0.320" (8.13mm)
Overall Contact Length	0.437" (11.10mm)	0.425" (10.80mm)	0.450" (11.43mm)	0.450" (11.43mm)	0.650" (16.51mm)
Insulation Height	0.090" (2.29mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Contact Shape	Square	Square	Square	Square	Square
Contact Finish - Mating	Gold	Gold or Gold, GXT™	Gold	Tin	Tin
Contact Finish Thickness - Mating	30.0µin (0.76µm)	15.0µin (0.38µm)	10.0µin (0.25µm)	100.0µin (2.54µm)	100.0µin (2.54µm)
Contact Finish - Post	Tin	Tin	Tin	Tin	Tin
Contact Material	Copper Alloy	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Insulation Material	Liquid Crystal Polymer (LCP), Glass Filled	Thermoplastic	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)
Operating Temperature	-	-65°C ~ 130°C	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C
Current Rating (Amps)	-	3A per Contact	3A	3A	3A
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Insulation Color	Black	Black	Black	Black	Black
RoHS Status	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	Not Applicable	Not Applicable	Not Applicable
Product Status	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All substitute parts maintain Active product status and comply with UL94 V-0 flammability requirements. The Molex 0010897280 carries ROHS3 compliance with REACH Unaffected status. Substitute parts from Amphenol ICC (77313-801-28LF) and Sullins Connector Solutions (PBC14DAAN, PEC14DAAN, PEC14DACN) are ROHS3 compliant. The Amphenol ICC part carries REACH Affected status, while Sullins parts are REACH Unaffected.

Selection between substitute parts depends on specific application requirements regarding contact post length. The Sullins PEC14DACN features extended post length (0.320" / 8.13mm) suitable for applications requiring deeper board penetration or thicker PCB assemblies. The Amphenol ICC 77313-801-28LF and Sullins PBC14DAAN and PEC14DAAN provide standard post lengths (0.095" to 0.120") for conventional through-hole applications.

Contact finish specifications vary across the substitute group. The Molex original and Amphenol ICC parts feature gold mating surfaces, while Sullins PEC14DAAN and PEC14DACN employ tin finishes. Sullins PBC14DAAN retains gold mating finish. These finish variations do not affect mating compatibility but may influence corrosion resistance characteristics in specific environmental conditions.

Frequently Asked Questions (FAQ)

Q: Can Amphenol ICC 77313-801-28LF directly replace Molex 0010897280 in existing designs?

A: Yes. Both parts maintain identical pitch (2.54mm), position count (28), row configuration (2 rows), and mounting type (through-hole solder). Mating compatibility is assured. Minor variations in contact length and insulation height do not affect board-level integration.

Q: What is the primary difference between Sullins PBC14DAAN and PEC14DAAN?

A: Both parts share identical mechanical and electrical specifications. The primary difference is contact finish: PBC14DAAN features gold mating finish, while PEC14DAAN features tin mating finish. Selection depends on application corrosion resistance requirements.

Q: When should Sullins PEC14DACN be selected over other substitutes?

A: PEC14DACN features extended contact post length (0.320" / 8.13mm) compared to standard lengths in other substitutes (0.095" to 0.120"). This extended post is suitable for applications with thicker PCB assemblies or requiring deeper board penetration.

Q: Are all substitute parts RoHS compliant?

A: Yes. All substitute parts are RoHS compliant. The Molex original and Sullins parts carry ROHS3 compliance. Amphenol ICC 77313-801-28LF carries general RoHS compliance.

Q: What is the operating temperature range for substitute parts?

A: Amphenol ICC 77313-801-28LF operates from -65°C to 130°C. Sullins parts (PBC14DAAN, PEC14DAAN, PEC14DACN) operate from -65°C to 125°C. The Molex original part does not specify operating temperature range in provided documentation.

Q: Do all parts support the same current rating?

A: Amphenol ICC and Sullins substitute parts are rated for 3A per contact. The Molex original part does not specify current rating in provided documentation.

Q: What packaging format is available for these parts?

A: All parts are supplied in Bulk packaging format.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message